National Technical University of Athens (NTUA)
Εφαρμογή παλμικού ρεύματος στην ηλεκτρολυτική συναπόθεση μικροσωματιδίων ZrO2 σε μήτρα Ni υπό συνθήκες ισχυρής ανάδευσης: μελέτη μικροδομής και ιδιοτήτων των επικαλύψεων
Abstract
dc:descriptionThe electrolytic co‒deposition technique is widely applied for the production of metal matrix composite coatings, because it provides the potential to produce various composite electrodeposits by choosing different types of reinforcing materials and different metal matrixes. Generally speaking, electrolytic co‒deposition provides superior control over the operating parameters of the process, it has relatively low operating and set up costs (simple equipment, low operating temperatures, no need for vacuum) and has very good reproducibility. Moreover, it provides the potential to deposit coatings with uniform thickness over substrates with complex geometry, as well as thin films, multilayered coatings and alloy matrix composite coatings. It must be also noted that the production of electrolytic composite coatings at an industrial scale can be realized relatively easy, as there is no need to make any changes at the already existing process lines of the plating industries. The large variety of the different parameters that impact on the electrodeposition of composite coatings ‒bath’s composition, pH temperature and agitation, use of additives in the electrolyte, cathode’s movement, current density, type of current applied‒ allow the production of metal matrix composite deposits with well-defined microstructure and composition and thus, with predefined properties. In the frame of the present doctoral thesis, Ni/ZrO2 composite electrodeposits were produced from a Watts type bath, by employing the electrolytic co‒deposition technique. Direct (D.C.) and Pulse (P.C.) current regime was applied for the deposition of the coatings on non-moving brass cylindrical substrates. A homogenizer was used for the agitation of the electrolyte and the dispersion‒suspension of the zirconia particles, causing the prevalence of strong hydrodynamic conditions in the electrolytic cell. The electrodeposition was realized in the absence and presence of coumarin in the bath, a well known in electroplating industry levelling organic additive. Plain Ni deposits were also produced under D.C. regime serving as reference. In particular, under direct current regime plain Ni and Ni/ZrO2 composite coatings were produced by employing different values for the current density (j=2, 5 and 10 A∙dm-2) and pH (1.5, 3.5 and 4.4) of the electrolyte. Moreover, for all the previously mentioned values of j and pH, Ni/ZrO2 composite coatings were produced from a Watts bath containing 0.5 mmol∙L-1 coumarin. Finally, plain nickel and composite D.C. deposits were produced by varying coumarin’s concentration (Ccoum=0.1, 0.5, 1 and 2 mmol∙L-1) in the bath. The deposition of those coatings was realized for defined current density and pH values, i.e. j=5 A∙dm-2 and pH=4.4. Under pulse current regime, Ni/ZrO2 composite coatings were produced by altering the values of pulse frequency, ν (ν=0.01, 0.1, 1, 10 and 100 Hz) and duty cycle (d.c.=30%, 50%, 70% and 90%). The peak current density, jp, was kept constant at jp= 5 A∙dm-2 and the pH of the electrolyte was adjusted at 4.4. Furthermore, for the just mentioned jp and pH values at P.C. conditions, Ni/ZrO2 composite coatings were produced by adding 1 and 2 mmol∙L-1 of coumarin in the bath. As far as the rest pulse current parameters are concerned, duty cycle was kept constant and equal to 70% and pulse frequency, ν was varying, taking the values 0.01, 0.1, 1, 10 and 100 Hz. Using the XRD technique, D.S. diagrams were taken for all the produced deposits. After statistical analysis of the data obtained by the D.S. diagrams (calculation or relative texture coefficient RTChkl), the texture of the coatings was determined. Moreover, the Scherrer formula method was employed for estimating the mean crystallite size of nickel. The surface morphology of the samples was investigated by means of SEM technique, whereas the amount of co‒deposited zirconia particles in the nickel matrix, in the case of the Ni/ZrO2 composites, was evaluated from the zirconium element signal given by the EDS technique. In the case of the deposits that were produced with the addition of coumarin in the bath, their content in carbon was evaluated with the EDS technique as described. The Vickers microhardness was determined for all the produced deposits, as well as their surface roughness using a digital profilometer. The corrosion resistance was evaluated by means of electrochemical techniques. Those tests were performed at plain nickel and Ni/ZrO2 composite coatings, that were produced from Watts baths that contained different coumarin concentrations (Ccoum=0.5, 1 και 2 mmol∙L-1). From the above described study, the influence of the several electrolysis parameters that were altered during the electrochemical co‒deposition of zirconia particles in the nickel matrix under D.C. (j, pH, Ccoum) and P.C. (ν, d.c.%, Ccoum) regime on the deposit’s microstructure and properties was investigated. The goad to realize such investigation, was the luck in literature, related to Ni/ZrO2 composite electrocoatings, of any systematic study over the individual and combined effects of the above mentioned electrolysis parameters, especially the pulse ones. Furthermore, according to the as of today bibliography, a homogenizer is used for the first time as bath agitation method for the production of metal electrodeposits or metal matrix composite electrodeposits, constituting one more innovating aspect. From the results presented in the present work, it is deduced that a homogenizer is a means of agitation suitable for achieving homogeneous dispersion of the reinforcing particles in the metal matrix and preventing particles from agglomerating without the necessity to add any dispersing chemical species in the electrolyte.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2019
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Dardavila, Maria-Myrto
- Δαρδαβίλα, Μαρία-Μυρτώ
Subjects
dc:subject × 10- Ηλεκτροαπόθεση συνθέτων επικαλύψεων μήτρας νικελίου
- Υπό καθεστώς παλμικού ρεύματος
- Οξείδιο του ζιρκονίου ως φάση διασποράς
- Electrodeposition of nickel matrix composite deposits
- Under pulse current regime
- Zirconium oxide as dispersion phase
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Χημικού Μηχανικού
- Engineering and Technology
- Chemical Engineering
Rights
dc:rights- Statement dc:rights
-
- BY_NC_ND
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/45168