University of Patras
Προσομοίωση μεγάλων δινών της αλληλεπίδρασης παλλόμενης ροής, στερεομεταφοράς και μορφοδυναμικής υπεράνω αμμώδους πυθμένα με πτυχώσεις
Abstract
dc:descriptionThe scope of the present work is to study in detail the sediment dynamics that occur under oscillatory flow conditions over moving sandy beds. Large-eddy simulations were performed, with emphasis on the development of a morphological module in order to analyze the creation and evolution of ripples. The simulations were based on the numerical solution of the Navier-Stokes equations for incompressible flow and the advection-diffusion equation for the suspended load, while empirical formulas were used for the bed load. The evolution of the bed form was obtained by the numerical solution of the equation of sediment continuity. A fractional time-step scheme was used for the temporal discretization, while finite differences were used for the spatial discretization on a Cartesian grid. The Immersed Boundary method was implemented for the imposition of fluid and sediment boundary conditions on the moving bed surface. The numerical model was effectively validated against numerical studies and laboratory measurements involving oscillatory wave motion and sediment transport. Nine cases were simulated for different values of the mobility parameter, ψ, and the ratio ao/Dg, where ao is the orbital amplitude and Dg is the sand grain diameter. For bed sediment transport, the net load was always in the onshore direction and its magnitude decreased with increasing ao/Dg, while the effect of ψ on the net bed load was stronger for ψ < 50 than for ψ > 50. For suspended sediment transport, the net load was always in the offshore direction, and its magnitude increased with increasing ψ and increasing ao/Dg. The relative contribution of bed load versus suspended load on the total sediment load was found to depend on both ψ and ao/Dg. The distinction between bed and suspended load dominance was quantified with a single parameter based on the ratio of free-stream velocity to sand grain settling velocity. Numerical simulations of the morphological evolution of the bottom were also conducted. Ripple creation and propagation from semi-flat or random beds were examined, until the bed form reaches an equilibrium shape, adapting to oscillatory flow conditions based on ψ. The numerical model has the ability to demonstrate phenomena of ripple creation, growth, annihilation, merging and migration, resulting in equilibrium ripples with wavelengths in agreement with those predicted by empirical equations. It was observed that under the same hydrodynamic forcing, the bed tends to reach the same equilibrium state, regardless of the initial bed form. When simulating ripple evolution under oscillatory flow initially oblique to a rippled bed, in the beginning the ripples seem to lose their two dimensional shape and break into smaller three dimensional structures. Subsequently, those structures merge into larger ones that finally result in ripples formed perpendicular to the flow direction.
Degree
thesis:*- Grantor dc:publisher
- University of Patras
- Year dc:date
- 2018
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Leftheriotis, Georgios
- Λευθεριώτης, Γεώργιος
Subjects
dc:subject × 14- Προσομοίωση μεγάλων δινών
- Μεταφορά ιζήματος
- Παράκτια μορφοδυναμική
- Μέθοδος εμβαπτισμένου ορίου
- Πτυχώσεις πυθμένα
- Large eddy simulation
- Sediment transport
- Coastal morphodynamics
- Immersed boundary method
- Bed ripples
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Πολιτικού Μηχανικού
- Engineering and Technology
- Civil Engineering
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/45291