Aristotle University Of Thessaloniki (AUTH)
Αξιοποίηση γραμμικών και μη-γραμμικών ιδιοτήτων του γραφενίου σε νανοφωτονικούς κυματοδηγούς
Abstract
dc:descriptionThe main objective of this doctoral thesis is the study of integrated nanophotonic waveguides incorporating one or multiple graphene sheets, both in the linear and nonlinear regime. The motivation of this work is the exceptional optical properties of graphene sheets which can be further exploited by the increased light-matter interaction offered by subwavelength photonic waveguides. The analysis is founded on the strict mathematical treatment of 2D materials as conductive sheets. This is achieved by modeling 2D materials through the anisotropic tensors of the corresponding linear and nonlinear surface conductivities. Our approach is demonstrated to be superior to the more commonly used in the literature equivalent bulk medium approximation, both in terms of computational burden and physical consistency with graphene’s 2D nature. Alongside the mathematical treatment we also present a comprehensive review of theoretical models and recent experimental results for the calculation of graphene’s surface conductivities. For the nonlinear propagation of guided modes and assessment of graphene’s non-linear contribution we employ a version of the nonlinear Schrödinger equation (NLSE) which was rigorously extracted for the inclusion of 2D conductive sheets. The first nonlinear phenomenon discussed is the optical Kerr effect, which is modeled by graphene’s third order nonlinear surface conductivity. In direct comparison with the common bulk nonlinear parameters, we calculate the surface nonlinear parameters which encompass graphene’s nonlinearity as well as the mode’s overlap with it. The surface nonlinear parameters are calculated in the near infrared for several archetypical integrated silicon photonic (wire, slot) and plasmonic (metal stripe, metal-insulator-metal) waveguides. A graphene nano ribbon supporting plasmonic graphene edge modes is also considered in the far infrared regime. By also taking into account the induced linear losses by graphene, we are able to directly compare bulk and surface nonlinear contributions, concluding that the inclusion of graphene greatly enhances nonlinear propagation, especially in silicon waveguides. Graphene’s saturable absorption (SA) in integrated photonic waveguides is also studied. Graphene’s SA is expressed through the saturation of electron interband transitions in Maxwell’s equations, thus avoiding homogeneous or scalar field approximations. Our approach is again based on the rigorous NLSE framework. We consider three distinct scenarios: the propagation of one waveguide mode, the simultaneous propagation of two modes at the same frequency and, finally, the simultaneous propagation of two frequencies of the same mode. The theoretical calculations are presented separately for each case by gradually increasing the complexity of the problem. The approach demonstrated in this work is able accurately model the SA of conductive 119sheets through the overlap of arbitrarily complex spatial and temporal mode profiles with the 2D material. The NLSE formulation is used to study three examples: Firstly, the self-modulation of losses in a gaussian pulse which can lead to pulse shaping and extinction ratio enhancement. Secondly, the cross-modulation of absorption between the two polarizations of a waveguide mode and, thirdly, the cross-modulation of losses between two frequencies. The last two cases both demonstrate that graphene SA can be used for the all-optical control of light in integrated photonic waveguides with lower power requirements than the Kerr nonlinearity. In the final chapter of the thesis, we develop an analytical study of passive Parity-Time Symmetric (PT-Symmetric) photonic coupled elements with graphene. We consider a photonic coupler consisting of two straight waveguides, one of which exhibits variable losses. The coalescence of the coupler’s eigenmodes due to the loss-induced exceptional point is utilized in order demonstrate 1 × 2 switching functionality. The analysis reveals the existence of absolute limits of the insertion losses and extinction ratio of such a device. Subsequently, we use graphene as the means to modulate the losses of one of the waveguides of a silicon photonic coupler. The losses are modulated electro-optically by external electrostatic basing of the graphene sheets while the biasing conditions are meticulously chosen so as to satisfy the requirements for passive PT-Symmetric operation. The suggested switch/router is characterized by low losses, high extinction ratio and small footprint. Finally, by taking advantage of graphene’s anisotropic conductivity we demonstrate how the above design can be modified in order to achieve polarization dependent switching.
Degree
thesis:*- Grantor dc:publisher
- Aristotle University Of Thessaloniki (AUTH)
- Year dc:date
- 2018
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Chatzidimitriou, Dimitrios
- Χατζηδημητρίου, Δημήτριος
Subjects
dc:subject × 7Rights
dc:rights- Statement dc:rights
-
- BY_NC
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/45556