Back to search

National Technical University of Athens (NTUA)

Hydrodynamic analysis of ship and marine biomimetic systems in waves using GPGPU programming

Abstract

dc:description

Flapping wings located beneath or to the side of the hull of the ship are investigated as unsteady thrusters, augmenting ship propulsion in waves. The main arrangement consists of horizontal wing(s) in vertical oscillatory motion which is induced by ship heave and pitch, while rotation about the wing pivot axis is actively controlled. Moreover, the performance of oscillating foils in the presence of waves and currents is studied for the exploitation of combined renewable marine energy sources in nearshore and coastal regions. The system operates as a semi-activated biomimetic energy device, with imposed pitching motion and induced heaving motion in incident waves and flow. In addition to uniform currents, vertically sheared currents are also considered. In the present thesis, aiming at the detailed investigation of the free-surface effects, a novel method has been developed for the hydrodynamic analysis of 3D foils operating beneath the free surface and undergoing heaving (vertical) and pitching (rotational) oscillations while moving with a constant forward speed. Mathematical formulation is based on the theory of incompressible, inviscid unsteady potential flow, assuming that the rotational part of the flow is restricted in the trailing vortex sheets emanating from sharp edges; e.g. the trailing edge in the case of a foil. The motion and the geometry of the body are allowed to be general, thus no linearisation has been applied. The fully nonlinear boundary conditions are imposed on the free-surface boundary and an efficient approach is developed for the treatment of oblique nonlinear waves. No smallness assumptions are made, that is, the present approach is a non-perturbative one. The instantaneous angle of attack is influenced by the foil oscillatory motion and by the incident waves. At a first stage of development we consider moderate submergence and relatively low speeds, permitting us to approximately neglect breaking of waves and cavitation. The calculation of generalised forces is obtained by pressure integration, without any further assumption.The application of Green’s formula on the body boundary and the exact free-surface boundary leads to a weakly singular Boundary Integral Equation (BIE) for the unknown boundary fields.For the numerical solution we use a potential based boundary element method (BEM) and a collocation method, obtaining the discretised BIE. The latter after discretisation will be used for the construction of the discretised extended Dirichlet-to-Neumann (DtN) operator that will serve as an algebraic constraint to the equations of the dynamic system, that will be constructed from the free-surface boundary conditions and the Kutta condition. A curvilinear finite difference method (CUFDM), in variable, non Cartesian and non orthogonal coordinate systems, together with the DtN operator, are exploited to express the potential, included in free-surface conditions and the Kutta condition, in terms of the dynamic variables of the problem. The dynamic variables are the free-surface potential and elevation and the potential jump (dipole) intensity at the Kutta strip. The classical time-stepping free-wake analysis in unbounded domain is extended to include the effects of additional boundaries. The evolution of the unknown dynamic variables is obtained by time integration and a novel time-marching scheme is developed for that purpose. Finally, the total solution can be constructed using that information, the DtN operator, the discretised form of the representation theorems and the time history of other known functions.For the numerical solution of the 3D, unsteady and nonlinear problem an efficient GPU accelerated boundary element method (BEM) is proposed. A computational code is developed,exploiting parallel programming techniques and general purpose programming on graphics processing units (GPGPU), using the CUDA C/C++ application programming interface (API).It is illustrated that the performance of the GPGPU computational code, both in terms of time and space complexity, is substantially higher than the performance of corresponding serial or parallel Central Processing Unit (CPU) codes, implemented by exploiting resources of similar cost.The present work is structured as follows. We begin in Chapter 1 with a historic review concerning biomimetic wing systems augmenting ship propulsion in waves and oscillating foils operating as a semi-activated biomimetic energy device in incident waves and flow, together with the motivation for the present study and research. Novel contributions of the present thesis are illustrated and an introductory section is dedicated to the GPU implementation.Subsequently, in Chapter 2, unsteady lifting bodies in an unbounded domain are studied. We assume that the body and the wake boundaries remain in adequately large distance from the other boundaries (free-surface, bottom, lateral walls, shore etc). Moreover, no linearisation is performed in wake dynamics and the evolution of the wake is obtained in the context of a time-stepping method. Numerical results, concerning convergence, stability and efficiency of the proposed method and the developed GPU code are shown and discussed. The interesting problem of efficient thrust production using biomimetic flapping-foil systems is numerically investigated. The present method is applied to obtain numerical estimations of basic hydro-dynamic quantities such as lift and thrust coefficient, over a range of motion parameters, including reduced frequency, Strouhal number, maximum angle of attack and aspect ratio. Our analysis indicates that significant efficiency is achieved under optimal operating conditions.The present method and the GPU code could serve as a useful and efficient tool for the assessment, preliminary design and control of the studied efficient marine propulsion system and the reduction of fuel-oil consumption.Then, in Chapter 3, the method is extended to study the effect of the free-surface boundary and the interaction with the trailing vortex sheet. The modeling includes finite depth effects. We begin with the definition of the unsteady initial boundary value problem (IBVP) problem in a partially bounded domain (Sec.3.2). For simplicity in the description of the present method,and especially concerning the treatment of the free-surface conditions (including the conditions at infinity), we will start our presentation with the boundary integral formulation in the case of non-lifting flow around a body of smooth but arbitrary geometry, undergoing general motion (Sec.3.4). This problem contains, as cases of special interest, the wave-resistance problem due to constant-speed forward motion and the enforced radiation problem due to body oscillations. Then, in Sec.3.5, the whole methodology is extended to model the case of a flapping foil in forward motion beneath the free-surface radiating waves, giving special attention to the treatment of the discretised form of pressure-type Kutta condition and free-surface boundary conditions. The problem of thrust production using biomimetic flapping-foil systems beneath the free-surface including wave-making resistance and finite depth effects is numerically investigated. The importance of free-surface and 3D effects, nonlinearity as well as the superior performance of the developed GPU code, are illustrated.In the last part of the present work (Chapter 4), the method and the developed GPU code, is extended in cases of lifting flows beneath the free surface and in fully nonlinear waves. That problem is presented in Sec.4.2. Although, the problem of the system could be treated by the method presented in Chapter 3 using a classical numerical wave tank, a more efficient approach is selected and in that direction a method is developed and presented in Sec.4.3 and in Sec.4.4. The importance of nonlinearity and the performance of the developed GPU code in the case of 3D foils in oblique waves, are also illustrated. The problem of augmentation of the ship’s main propulsion in waves is studied in Sec.4.5.3. The present work can be exploited for the design and optimum control of biomimetic systems extracting energy from sea waves for augmenting marine propulsion in rough seas, with simultaneous reduction of ship responses offering dynamic stabilization. Moreover, a semi-activated biomimetic energy de-vice, with imposed pitching motion and induced heaving motion in harmonic incident waves and flow is proposed and a feasibility study is conducted in Sec.4.5.4. The present method can be applied to the design and optimum control of such biomimetic systems operating in the nearshore/coastal region and extracting energy from waves in the presence of ambient currents.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2019

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Filippas, Evangelos
  • Φίλιππας, Ευάγγελος

Subjects

dc:subject × 22

Rights

dc:rights
Statement dc:rights
  • BY
Language dc:language
eng

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/45699

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Filippas, Evangelos; Φίλιππας, Ευάγγελος. Hydrodynamic analysis of ship and marine biomimetic systems in waves using GPGPU programming. National Technical University of Athens (NTUA), 2019. http://hdl.handle.net/10442/hedi/45699