National Technical University of Athens (NTUA)
Μελέτη δημιουργίας συγκολλήσεων δια τριβής με ανάδευση κραμάτων αλουμινίου ενισχυμένων με κεραμικά νανοσωματίδια
Abstract
dc:descriptionThe purpose of this dissertation is to optimize the Friction Stir Welding (FSW) of similar and dissimilar shipbuilding aluminum alloys by integrating reinforcing nanoparticles into the weld seam and then evaluate the results through the study of the microstructure of the weld nugget and through mechanical and microhardness testing.The AA5083 (in the H111 strain hardened condition) and AA6082 (in the solution heat treated and artificially aged T6 condition) alloys were used. The main alloy of the first is magnesium and of the second is silicon. Silicon Carbide (SiC), Titanium Carbide (TiC).More specifically, the following welds were performed:1. Similar FSW of the AA5083-H1112. Similar FSW of the AA5083-H111 with SiC reinforcement3. Similar FSW of the AA5083-H111 with TiC reinforcement4. Similar FSW of the AA6082-T65. Similar FSW of the AA6082-T6 with SiC reinforcement6. Similar FSW of the AA6082-T6 with TiC reinforcement7. Dissimilar FSW between the AA5083-H111 and the AA6082-T68. Dissimilar FSW between the AA5083-H111 and the AA6082-T6 with SiC reinforcement9. Dissimilar FSW between the AA5083-H111 and the AA6082-T6 with TiC reinforcementInitially, a preliminary study was conducted in order to determine the optimum welding parameters. This study was based on the results of past work of the Shipbuilding Technology Laboratory (STL) staff and the corresponding work in the international literature. In particular, the traverse speed and the rotational speed of the tool as well as the number and the direction of the FSW passes were changed. The tool used in all the tests had a flat cylindrical shoulder as well as a cylindrical pin which had a left-hand thread to improve material flow.After the completion of this preliminary study and the determination of the optimum welding and processing parameters regarding the capabilities of the STL’s FSW machine, a thorough study of the welded specimens followed. This study began with the observation of the specimens by means of optical and electron microscopy, both scanning (SEM) and transmission (TEM). During the said study, chemical analysis of the specimens was performed by energy dispersive spectroscopy (EDS). It was then followed by microhardness and the mechanical (tensile) testing.Finally, an in situ measurement of both temperature and force distributions was performed, on a selected weld, and the results were used as data to optimize the thermal numerical simulation of the process with the finite element method.In conclusion, the study of the microstructure revealed that, during the welding process, the phenomenon of the dynamic recrystallization takes place which results in the reduction of the size of the grains in the weld nugget. In the nanoparticle reinforced cases, this phenomenon is even more evident. It was also observed that the thermal cycle of the welds did not affect the type of intermetallic compounds in their weld nugget but contributed to the decrease of their size and density relative to the equivalent of the base metals. Additionally, it was observed thatboth the dislocations and the nanoparticles are dispersed randomly in the weld nugget without following a specific pattern. Also, in combination with the results of the microhardness and the tensile tests, it was concluded that the strengthening of the weld nugget is meaningful in the case of the SiC and the TiC reinforcement, where a slight improvement in the hardness and the tensile strength is observed. Finally, the phenomenon can be simulated numerically quite satisfactorily, both thermal and flow (coupled) simulations were achieved, with the results being very close to the experimental ones.This PhD thesis presented several innovations such as:• Achieving the sound friction stir welding of AA5083 reinforced with TiC nanoparticles.• Achieving the sound friction stir welding of AA6082 reinforced with SiC and TiC nanoparticles• Achieving the sound dissimilar friction stir welding between the AA5083 and the AA6082 reinforced with SiC and TiC nanoparticles.The innovation also extends to the study and processing of the results. This is the first time that such an extensive study by electron microscopy was conducted which focuses on three different factors, namely the dislocations, the intermetallic compounds and the reinforcing nanoparticles. It was also the first time that such an intense effort was made to correlate the metallurgical phenomena observed in the weld nugget during friction stir welding with the mechanical behavior of the welds. During the electron microscopic study, the phenomenon of the dynamic recrystallization, that occurs due to the elevated temperatures and forces developing during the intense plastic deformation of the weld nugget material due to stirring, was observed. In particular, observation of both stages of the phenomenon, i.e. both the formation of the cell structure and the formation of the subgrains, was achieved. Additionally, it has been concluded that these microstructural changes have a positive - most of the times – effect on both the mechanical behavior and the hardness of the welded materials. Finally, it is the first time that an FSW thermal model is validated using thermocouples as well as via the comparison of the numerical simulation results with the experimental data. More specifically, the numerical simulation of the Friction Stir Welding process was achieved with both the COMSOL MULTIPHYSICS programm. The thermal cycle of the process was determined, using thermocouples, in order to confirm the results of the themal model. The results of the thermal-CFD model were confirmed via the optical microscopy study of the cross sections of the welds.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2018
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Karakizis, Panagiotis
- Καρακίζης, Παναγιώτης
Subjects
dc:subject × 24- Συγκόλληση δια τριβής με ανάδευση
- Νανοσωματίδια ανθρακοπυριτίου (SiC)
- Νανοσωματίδια ανθρακοτιτανίου (TiC)
- Δοκιμές εφελκυσμού
- Μικροσκληρότητα
- Ηλεκτρονική μικροσκοπία διερχόμενης δέσμης
- Ηλεκτρονική μικροσκοπία σάρωσης
- Οπτική μικροσκοπία
- Μικροδομή
- Μηχανικές ιδιότητες
- Friction stir welding
- Silicon carbide (SiC) nanoparticles
- Titanium Carbide (TiC) nanoparticles
- TENSILE TESTS
- Microhardness
- Transmission electron microscopy
- Scanning electron microscopy
- Optical microscopy
- Microstructure
- Mechanical properties
- Επιστήμες Μηχανικού και Τεχνολογία
- Μηχανική Υλικών
- Engineering and Technology
- Materials Engineering
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/45701