Abstract
dc:descriptionThe present thesis investigates the influence of the molecular weight and the architecture in crystallinity, conformation and dynamics of polymeric chains in nanocomposites with inorganic additives. Poly(ethylene oxide) (PEO) and montmorillonite (Na+-MMT) were utilized as the polymer and the inorganic material, respectively. More specifically, two linear PEOs were utilized, with molecular weights of 100,000 g/mol and 21,200 g/mol, and two star PEO with 3 branches each. The first has a total molecular weight similar to that of the linear PEO of lower molecular weight, 22,700g/mol (sPEO22), and the second has branch molecular weight similar to the molecular weight of the linear, i.e. 56,700 g/mol (sPEO56).The composition of the synthesized nanocomposites covers the whole range from neat polymer to neat montmorillonite. Study of the structure in the nanohybrids with X-ray Diffraction showed the intercalation of the chains in all cases with interlayer distances indicating mono- and bilayer structure of the chains as the concentration of the polymer increases. Addition of the clay affects significantly the crystallinity of the nanohybrids, which is reduced as the content of the clay increases; for hybrids with high clay content the polymer is found completely amorphous. Nevertheless, the concentration at which this decrease starts seem to depend on molecular weight since it takes larger values for the high molecular weight polymer.The influence of the inorganic material and of the spatial restriction on conformation of the chains was studied, as well, taking into consideration the effect of the polymer architecture. The investigation of chain conformations was performed by Infrared Spectroscopy evaluating the ratio of gauche to trans conformation of the wagging vibration of the methylene group for the C-C bond and the analogous ratio of the twisting vibration of the methylene group for the C-O bond. The analysis of the infrared spectra reveals an increase ofthe gauche conformations as the concentration of the clay and as the temperature increases, indicating that the chains adopt a liquid-like structure under confinement or close to the inorganic surfaces. The energy difference between the gauche and the trans states in all nanocomposites have higher values in comparison to the respective one of the neat polymers. The kinetics of polymer crystallization were studied in nanohybrids with high content in PEO(60 and 80%wt)using Differential Scanning Calorimetry. The crystallization time seems to depend on the molecular weight whereas the architecture does not play a significant role. The Avrami coefficients designate heterogeneous crystallization in rods and homogeneous crystallization in disks in all samples. The activation energy seems to be affected by the molecular weight but not by the architecture of the chains in the neat polymers, whereas differences were observed in thecase of the nanocomposites where the activation energy depends on the concentration of the clay as well since the interactions between the inorganic surfaces and the chains have an important contribution.Finally, the polymer dynamics were investigated by Dielectric Spectroscopy in all neat polymers as well as in nanohybrids where all of the chains are restricted in the interlayer area of the inorganic material(30% wt in polymer) in order to investigate the influence of the confinement on the relaxation modes. Dielectric spectra reveal multiple relaxation modes and significant differences between the neat polymers and the nanohybrids. Study of the imaginary part of the dielectric constant in nanohybrids demonstrates two main relaxation modes in contrary to the neat polymers where three relaxation modes can be clearly observed. In all cases, both in neat polymers and nanocomposites, the relaxation times are independent from the molecular weight or the architecture, except from the case of the -relaxation which refers to the motion of a few chain segments. This mode is absent from the dynamics in the confined polymers, where a new relaxation mode appears in temperatures below the glass transition temperature with an Arrhenius temperature dependence, instead of the usual VTF dependence of the neat polymers. The local β-mode is characterized by lower activation energy in the nanocomposites. An additional mode is detected in neat polymers which has been attributed, in the literature, to the segmental relaxation of the chains confined between the crystalline structures or in the presence of humidity.
Degree
thesis:*- Grantor dc:publisher
- University of Patras
- Year dc:date
- 2019
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Bollas, Stavros
- Μπόλλας, Σταύρος
Subjects
dc:subject × 14Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/45718