Back to search

National Technical University of Athens (NTUA)

Εξοικονόμηση ενέργειας κατά την ηλιακή θέρμανση και κλιματισμό κτηρίων με χρήση υλικών αλλαγής φάσης (PCM)

Abstract

dc:description

The objective of this dissertation is the development and the study of various solar systems used for the heating and the cooling of buildings in combination with the application of Phase Change Materials (PCM), which have up to tenfold storage capacity, in their building materials, aiming the minimization of energy consumption and the comparison with conventional systems. In particular, solar heating by coupling solar collectors with water heat pumps to cover heating loads and solar cooling by coupling solar collectors with an absorption chiller to cover cooling loads with the simultaneous addition of a PCM layer to the building envelope are the main technologies which were developed and studied energetically and financially for Greece and specifically for the location of Athens.This dissertation is divided into two parts. The first part contains five chapters in which a literature review of the subject is presented. Specifically, in the first chapter there is an introduction that refers to the energy situation of today in Greece as well as in the world. At the same time, the current situation in Greece, regarding the energy savings in the building sector, is mentioned.The second chapter gives the basic principles of solar energy and analyzes the principles of operation of solar systems such as flat plate collectors, concentrated collectors and evacuated tube collector as well as thermal-photovoltaic and photovoltaic systems.Chapter 3 deals with the use of solar systems in the building sector and particularly for heating and cooling.Chapter 4 gives the basic principles of thermal energy in heat transfer and analyzes PCMs, namely their operation, their properties, their categories and their methods of integration.In the fifth chapter, there is a reference to the use and the application of PCM in the building’s envelope as well as in the active systems of buildings, which were found in the international literature.The second part contains four chapters in which the modeling of novel heating and cooling systems, the simulations and the comparisons of results are presented.22Specifically, in the sixth chapter simulations are made, for heating and cooling of buildings with PCM in the building’s envelope (roof, walls, floor), with the energy simulation software TRNSYS 17. In addition, the basic computational models of the building (Type 56) and PCM (Type 1270) are analyzed in detail. The validation of the results of the simulations is done by comparing experimental data from the international literature.In chapter 7, novel solar heating systems with PCM in the floor of a building are developed and simulated with the TRNSYS 17 software. Specifically, a parametric analysis and optimization of a solar assisted underfloor heating system with an auxiliary heat source and a PCM layer on the floor of a building is carried out. The idea of the system was the warm water from a solar collector to act as a heat source for the PCM in a floor heating system. In addition, there is an energetic, a financial evaluation and a comparison of three underfloor PCM heating systems and different solar-assisted water heat pumps (system with FPC, PVT and FPC-PV). The goal of these optimizations of developing systems is to reduce energy consumption and costs. In addition, the validation of the results of a simple solar underfloor heating system with PCM on the floor is made by comparing experimental data from the international literature.In chapter 8, simulations of systems for solar cooling of buildings with PCM in their walls with the software TRNSYS 17 and 18 are made. In particular, a numerical simulation of a solar cooling system with and without phase change materials in radiant walls of a building is carried out. The coupling of an evacuated tube collector with an absorption chiller and the simultaneous application of a PCM layer on the building’s radiant walls to cover the cooling loads is a novel cooling system. Next, a roof cooling system and a PCM layer is studied using the new model of TRNSYS 18 (Type 399) to model the PCM. In particular, outdoor and indoor temperature fluctuations with PCM, are being compared for the meteorological data of Germany (Berlin) and Greece (Athens).Finally, the conclusions, the originality of the data and the proposals for future research of this dissertation are presented in chapter 9. In general, it has been proved that the application of PCMs to the building’s envelope in combination with solar systems reduces the heating and cooling needs of the building by achieving a normal fluctuation of indoor temperature.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2019

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Plytaria, Maria
  • Πλυταριά, Μαρία

Subjects

dc:subject × 12

Rights

dc:rights
Statement dc:rights
  • BY_NC_ND
Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/45817

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Plytaria, Maria; Πλυταριά, Μαρία. Εξοικονόμηση ενέργειας κατά την ηλιακή θέρμανση και κλιματισμό κτηρίων με χρήση υλικών αλλαγής φάσης (PCM). National Technical University of Athens (NTUA), 2019. http://hdl.handle.net/10442/hedi/45817