National Technical University of Athens (NTUA)
Applications of oscillators in energy conversion
Abstract
dc:descriptionThe scope of this dissertation concerns environmental excitations such as sea waves and sound. Two individual aspects are examined, the first deals with the harvesting of ocean wave energy, while the second deals with the reduction of noise pollution in air and ground transportation vehicles by means of acoustic treatment for the comfort of the passengers.The gradual exhaustion of fossil fuel deposits has been a crucial issue for the scientific community. Along with the environmental effects that accompanies their use and the detrimental effects to human health, a turn to "green", renewable energy sources consists a top priority. The increasing exploitation of solar and wind energy does not reflect equally on the utilization of sea wave energy, which in fact has higher energy density compared to the aforementioned energy sources. Consequently, sea wave energy consists an area of great interest and great, untapped potential.Regarding noise pollution in means of transportation, the main issue concerns the treatment of low frequency noise -where conventional means of passive treatment have limited capabilities- which is the range of noise generated mainly from the rotating engines, motors etc. of these vehicles. Solutions such as acoustic "sandwich" type panels, deal poorly with low frequency noise as most often coincides with the eigenfrequencies of these structures. Moreover, the performance of solutions like local dampers, is associated with increase in mass of the total structure. This fact conflicts with the ever-increasing demands for weight reduction in transportation vehicles to minimize fuel consumption and satisfy power requirements.Conclusively, two different implementations of oscillators for energy conversion and utilization of sea wave energy are examined, while in the field of noise control, a segregation is made between passive and active means of acoustic treatment. In one hand, a passive solution for acoustic treatment of low frequency noise is proposed based on the incorporation of the KDamper oscillator, in the design of acoustic panels and later, on meta-materials for the generation of bandgaps in noise propagation, at selected low frequency ranges. On the other hand, the design of an acoustic transducer (loudspeaker) using dielectric elastomer (DE) actuators is presented. The purpose of this electro-active polymer (EAP) loudspeaker is to be used in automatic, active noise control systems in the compartments of the passengers.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2019
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Paradeisiotis, Andreas
- Παραδεισιώτης, Ανδρέας
Subjects
dc:subject × 36- Περιβαλλοντικές εφαρμογές
- Κραδασμοί
- Κυματική ενέργεια
- Μόνωση
- Μεταϋλικά
- Ακουστική
- Απόσβεση διαταραχής
- Απορρόφηση ενέργειας
- Έξυπνα υλικά
- Ελαστομερή πολυμερή
- Δυναμική
- Ιδιοδιανύσματα
- Αρνητική στιβαρότητα
- Μετατροπείς ενέργειας
- Ακουστικά μέσα
- Θόρυβος χαμηλών συχνοτήτων
- Ambient noise
- Active noise and vibration control
- Vibration isolation
- Wave energy converter
- Wave energy
- Acoustics
- Low frequency noise
- Passive acoustic treatment
- Metamaterials
- Dielectric films
- Dynamics
- Modal analysis
- Damping
- Absorption
- Negative stiffness
- Transportation means
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Μηχανολόγου Μηχανικού
- Engineering and Technology
- Mechanical Engineering
Rights
dc:rights- Statement dc:rights
-
- BY
- Language dc:language
- eng
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/45819