National Technical University of Athens (NTUA)
Computational analysis of transitional and massively separated flows with application to wind turbines
Abstract
dc:descriptionLaminar to turbulent transition and higher fidelity turbulence modeling have been implemented in the parallelized, unstructured, compressible Navier-Stokes solver MaPFlow.In the case of laminar to turbulent transition, both boundary layer and transport equation approaches were assessed. These include the e N method and the transport equation models γ-Re θ , γ and AFT. All approaches were validated against a wide range of cases concerning airfoils, wings/blades and generic fuselage, stemming from both the wind energy and the aeronautics sectors. The focus was on integrated loads and transition locations. In the context of two-dimensional simulations, the boundary layer e N method and the AFT transport equation model exhibit better performance than the other alternatives. The γ-Re θ model is also a viable option if Reynolds numbers not higher than 6 x 10 6 are considered. For Reynolds numbers higher than this limit, the accuracy of the model was found to deteriorate. However, both the e N method and the AFT model cannot be used to predict crossflow transition in the context of three-dimensional simulations. In such scenarios, the γ-Re θ model can give accurate results, provided that Re numbers fall within the aforementioned limit.In the case of higher fidelity turbulence modeling, both Large Eddy Simulation (LES) and Detached Eddy Simulation (DES) approaches were implemented. LES utilized the Smagorinsky subgrid model. Regarding DES, both Delayed DES (DDES) and Improved Delayed DES (IDDES) variants were considered. The focus was on flow cases with massive separation. Both LES and DES provided more accurate results than the baseline Unsteady Reynolds Averaged Navier Stokes (URANS) simulations when compared to experiments and reference results. Neither LES nor DES were pushed to their limits. DES is considered computationally less demanding, due to wall modeling inside the boundary layer region. Therefore, it is a more viable option than LES for industrial applications. However, due to wall modeling, DES is not expected to perform well in flows where the presence and development of small turbulent scales inside the boundary layer are important. In those cases, LES using fine meshes should be considered.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2019
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Diakakis, Konstantinos
- Διακάκης, Κωνσταντίνος
Subjects
dc:subject × 16- Υπολογιστική ρευστομηχανική (CFD)
- Μοντελοποίηση μετάβασης από στρωτή σε τυρβώδη ροή
- Μοντελοποίηση τύρβης
- Αποκολλημένες ροές
- Συμπιεστή ροή
- Μέθοδος προσομοίωσης μεγάλων δινών
- Computational fluid dynamics (CFD) code
- Transition modeling
- Large Eddy Simulation (LES)
- Detached Eddy Simulation (DES)
- Separated flows
- Compressible flow
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Μηχανολόγου Μηχανικού
- Engineering and Technology
- Mechanical Engineering
Rights
dc:rights- Statement dc:rights
-
- BY
- Language dc:language
- eng
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/46180