National and Kapodistrian University of Athens
Διανομή συχνοτήτων αναφοράς μέσω εγκατεστημένων δικτύων οπτικών ινών
Abstract
dc:descriptionThe precision and stability of frequency standards is rapidly improving aiming to boost experiments in fundamental physics and leverage the performance of technologies such as global positioning system, telecommunication networks and radio telescope array synchronization, long baseline interferometry and quantum networking. The possibility of comparing frequency standards produced from distant sources is of special scientific and technological interest. Furthermore, the synchronization of radio telescope antennas and telecommunication networks require the transmission of frequency standards at long distances with great accuracy and stability. The most accurate method to achieve this is the transmission of the standards through optical fibers. Optical fibers are immune to electromagnetic interference and being buried underground are less delicate to environmental perturbations. Nevertheless, the refraction index and consequently the group delay depend on temperature and mechanical stress and phase instability is observed at the receiver during temperature and stress fluctuations. Control loops are implemented to control the transmission imposed phase shifts by redirecting a portion of the received signal back to the transmitter. Amplifiers – regenerators are employed in long distance links to prevent excessive noise accumulation and preserve the signal quality. Moreover, deployed optical networks include fiber connections or splices causing back – reflections which deteriorate the back – propagating signal and impose noise to the phase error signal used for closing the control loop. In the context of this work, an all optical signal regenerator is proposed which not only resonantly amplifies the incoming wavelength but also provides wavelength conversion for the back - propagating signal to distinguish it from the reflections. The regenerator is based on dual mode injection locked laser. The laser operation was simulated and the regenerated signal stability was experimentally verified in a cascade link of two fiber spans. A simple method for doubling the microwave frequency standard was proposed next. The stability of the standard is less affected by phase noise if higher frequency is used. This requires more expensive modulators and photodiodes. If double sideband suppressed carrier modulation is employed, the frequency is doubled at the receiver end without using a wide bandwidth electro-optical modulator. Moreover, the dispersion induced spatial fading is vanished using this modulation format. The improvement in the fractional stability of the received frequency standard was experimentally verified.Following the achievements of the previous method, the feasibility of transferring even higher, mmwave or THz frequencies was investigated. The outcome of this effort was an opto-electronic frequency divider which does not require high bandwidth components, does not impose excessive phase noise and is capable to downscale those high frequencies using fractional frequency division. In this way, any desirable final electrical frequency can be selected, preserving the stability of the higher reference frequency transmitted through the link. The stability and low phase noise characteristics of the lower frequency produced at the receiver was experimentally verified. This divider also provides the possibility of synthesizing high microwave and mmwave frequencies. The synthesized electrical frequencies are tuned with high resolution by properly selecting the division ratio. Unlike other optoelectronic frequency synthesizers, all the required intermediate frequencies are locked to the high stability reference frequency.Another category of frequency standard dissemination schemes focuses on the phase error compensation at the receiver. Those methods are based on the temperature dependence of the fiber dispersion. Employing phase comparison of two copies of the standard which are transmitted at distant wavelengths, the transmission induced phase noise can be estimated and corrected. The problem with this technique is its much lower sensitivity compared to the round trip method. The sensitivity can be greatly improved using optical frequency standards but the vast frequency gap between optical frequencies must be somehow bridged in order to acquire the phase error. So, two solutions have been proposed in this work. In the first one, a three tone reference comb is transmitted. At the receiver, the optical tones are inserted into a phase sensitive amplifier, in which the phase relation between the tones affects the gain of the amplifier and so translates the temperature induced phase drift into output power fluctuations and finally to phase error voltage. The second one uses the same three tones at the transmitter and bridges the frequency gap at the receiver by phase modulating the central tone with high modulation depth. The modulating electrical frequency is produced at the receiver and is not required to be of high stability as its phase noise manifests as common mode in the phase error extraction process. The sensitivity of this method is the same with the previous one and is achieved using much lower optical power. This feature is very desirable in quantum network synchronization.
Degree
thesis:*- Grantor dc:publisher
- National and Kapodistrian University of Athens
- Year dc:date
- 2019
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Nikas, Thomas
- Νίκας, Θωμάς
Subjects
dc:subject × 20- Μετάδοση προτύπων συχνότητας
- Ευστάθεια προτύπων συχνότητας
- Δίκτυα οπτικών ινών
- Εγκλείδωση µε οπτική έγχυση
- Διαίρεση οπτικών συχνοτήτων
- Σταθεροποίηση φάσης
- Frequency standard transfer
- Frequency stability
- Optical fiber networks
- Optical injection locking
- Optical frequency division
- Phase stabilization
- Φυσικές Επιστήμες
- Επιστήμη Ηλεκτρονικών Υπολογιστών και Πληροφορική
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Ηλεκτρολόγου Μηχανικού, Ηλεκτρονικού Μηχανικού, Μηχανικού Η/Υ
- Natural Sciences
- Computer and Information Sciences
- Engineering and Technology
- Electrical Engineering, Electronic Engineering, Information Engineering
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/46219