Back to search

National Technical University of Athens (NTUA)

Computational study and optimization of flow and combustion processes in marine engines operating with heavy fuel oil

Abstract

dc:description

Heavy Fuel Oil (HFO) is the predominant marine fuel. Its future use will be affected by theglobal 0.50% sulfur cap entering into force in 2020. It is widely accepted nowadays thatComputational Fluid Dynamics (CFD) studies can substantially contribute to understanding andoptimizing engine aerothermochemistry, provided that the key in-cylinder processes, namely,spray break-up, evaporation, fuel-air mixing, ignition and combustion, are properly accountedfor in the frame of CFD modeling. The present thesis constitutes an extensive computationalCFD study of non-reactive and reactive HFO spray physics in the context of marine engines,including applications of optimizing HFO injection in large two-stroke marine engines. The studyis supported by experiments.In this frame, a new integrated model for calculating the thermophysical properties of marineHFO has been developed in the present work. The model considers HFO as an equivalent onecomponent heavy petroleum fraction with undefined composition, and requires as input fourvalues of fuel bulk properties, commonly measured at fuel bunkering. Thus, the model accountsfor any HFO quality stored onboard a vessel. The model predicts a large set of fuel propertiesrelevant for engine CFD studies, including temperature dependence. Further, model validationis performed by means of measurements of a number of properties of different HFO qualities.Next, the new model is applied to calculate the thermophysical properties of seven widely usedmarine heavy fuel grades as prescribed by ISO 8217:2010. Also, the model is tested with CFDsimulations of non-reactive HFO spray flow in a large constant volume chamber, and the resultsare compared against recent experiments. Here, spray modeling is based on a properadaptation of the cascade atomization and drop break-up (CAB) model. All computationalresults are in very good agreement with experiments.Moreover, the new detailed model of HFO thermophysical properties is utilized for extensiveCFD studies of HFO ignition and combustion in a large spray combustion chamber (SCC) andin a large marine engine; results are compared against existing and recent experiments, for twoHFO qualities. A new kinetic model accounting for HFO aromaticity is developed and used forignition modeling. Computational results are reported for reactive spray flow in the SCC, andare in good agreement with experimental data. The effects of HFO preheating on spraydevelopment are demonstrated. Finally, simulation results in a large marine engine are in goodagreement with experiments in terms of pressure, heat release rate and pollutant emissions.Overall, the present modeling is shown to be appropriate for detailed CFD studies of HFO sprayflow and combustion in marine engines.In a final step, multi-objective optimization is deployed to investigate the effects of a threepulse HFO injection strategy (pilot-, main- and post-injection) on Specific Fuel Oil Consumption(SFOC) and the final concentration of nitric oxides (NOX) and soot of a large two-stroke marineengine. An optimization procedure including unconstrained and constrained problems isformulated, by coupling the present modified KIVA-3 based CFD code with an optimization toolbased on Evolutionary Algorithms (EAs). For both problems, significant reductions in pollutantemissions are attained, in comparison to a reference case characterized by HFO continuousinjection; for the constrained problem, the reductions reach 15% and 11% for NOX and soot,respectively.In total, the work presented in the current thesis accounts for the following: Development of the new model of HFO thermophysical properties. The new model canaccount for the thermophysical properties of any bunkered oil, based on the commonlymeasured fuel properties: (a) density, (b) kinematic viscosity, and (c) sulfur content. Validation of the new model deploying measurements of HFO samples. Application ofthe new model to the calculation of thermophysical properties of the HFOs utilized inexperiments in a large spray chamber, performed by ETH Zürich and Winterthur Gas & Diesel (newly named since January 2015, formerly known as Wärtsilä SwitzerlandLtd.). Extension of the fuel library of the KIVA-3 CFD code by adding several HFO qualities. Further development of the ETAB spray model, in the frame of the CAB model, in theKIVA-3 CFD code, for HFO sprays. Application of the new model to the calculation of thermophysical properties of marineHFO qualities prescribed by the ISO8217:2010, in particular: 10RMA, 30RMB, 80RMD,180RMG, 380RMK, 500RMK and 700RMK. CFD studies of non-reactive HFO sprays in a large spray chamber, under evaporatingconditions, including a cross-evaluation of the Enhanced Taylor Analogy Break-up(ETAB) and CAB models. A new kinetic model accounting for HFO aromaticity, developed and implemented inthe KIVA-3 CFD code, for ignition modeling. CFD studies of non-reactive non-evaporating and evaporating HFO sprays in a largespray chamber, and comparison against the experiments performed by ETH Zürichand Winterthur Gas & Diesel, as well as other literature data. The effects of HFOpreheating on spray development are also demonstrated. CFD studies of combustion in SCC for poor and good ignition quality HFOs, andcomparison of results against experiments. A very good agreement betweencomputational results and experiments in terms of ignition delay and location isdemonstrated. CFD studies aiming at formulating a reference case of HFO combustion in a large twostroke marine engine. Very good trends between computational results andexperiments are achieved, in terms of pressure, heat release rate and pollutantemissions. The effect of HFO preheating is also considered. CFD studies of HFO combustion in large two-stroke marine engines, implementingadvanced injection strategies in the frame of mutli-objective optimization, aiming at thesimultaneous minimization of engine emissions and Specific Fuel Oil Consumption(SFOC).The presentation of work is organized in eleven chapters. Chapter 1 discusses thecharacterization of HFO, and presents the motivation for the present work. Detailed informationon air pollutants and emission regulations in the context of marine industry is presented inChapter 2. The development and validation of the new integrated thermophysical propertiesmodel of HFO are presented in Chapters 3 and 4, respectively. Chapter 5 presents the recentexperimental studies utilized for validation, as well as the CFD modeling adopted, including theintroduction of HFO ignition model. In Chapter 6, the CFD non-reactive and reactive studies ofHFO sprays in SCC are presented in detail. The CFD studies of HFO combustion in a twostroke marine engine (formulation of a HFO reference case) are discussed in Chapter 7.Chapter 8 includes the formulation of optimization studies in terms of advanced HFO injectionstrategies, as well as the discussion of results. The novelty of the present work is discussed inChapter 9. In Chapter 10, the main conclusions of the present study are summarized.Suggestions for future work are presented in Chapter 11. Finally, the list of references ispresented.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2019

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Kontoulis, Panagiotis
  • Κοντούλης, Παναγιώτης

Subjects

dc:subject × 10

Rights

Language dc:language
eng

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/46257

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Kontoulis, Panagiotis; Κοντούλης, Παναγιώτης. Computational study and optimization of flow and combustion processes in marine engines operating with heavy fuel oil. National Technical University of Athens (NTUA), 2019. http://hdl.handle.net/10442/hedi/46257