Abstract
dc:descriptionFlexible sensors can be used in many areas of our everyday life due to the significant advantages they offer, such as the ability to follow the curvature of the surface on which they are mounted, their low cost and their simple fabrication methods. The main parts of a flexible sensor are: a) the flexible substrate, b) the transducer which converts a signal from one physical form to a corresponding electrical signal, and c) the sensitive layer which interacts with the analyte molecules (i.e. a polymer is the chemically sensitive layer in a chemical sensor or the immobilized biomolecules in a biological sensor). Novel manufacturing technologies, as well as the new materials enable the development of a new generation of flexible sensors. For example, materials such as polyimide (PI), polyethylene napthaleate (PEN), polyethylene terephthalate, PET), polydimethylsiloxane (PDMS), paper and textiles replace the traditional rigid substrates such as glass and silicon, while materials such as graphene, carbon nanotubes and nanoparticles are widely used to make flexible sensors due to their mechanical and electrical properties (Chapter 1). This doctoral dissertation is part of this subject area and focuses on new manufacturing technologies for flexible sensors which enable integration and mass production capabilities (microelectronics technology and printed electronics technology) with the bibliographic overview of sensors on plastic substrates presented in Chapter 2. In the context of this dissertation, the work is focused on the development of devices using graphene family materials and specifically focused on: a) graphene nanopletelets, GNPs and b) graphene oxide. GNPs is an economical material that can be easily incorporated into polymeric matrices, and here it is used to construct capacitance strain sensors (Chapter 3). On the other hand, graphene oxide (GO) is a material which can be reduced to resemble the structure of pristine graphene and this makes it ideal candidate for the fabrication of chemical and biological sensors. For the selective deposition of the sensitive layers (polymers) of a chemical sensor on aflexible polyimide substrate, a novel two step lift-off technique method was developed. The method used an aqueous solution of polyvinyl alcohol (PVA) for the precise patterning of the polymers on interdigitated electrodes (IDEs). The method is easily scalable and it can be used for mass production of sensing devices. The detection performance of the capacitive sensors is evaluated against volatile organic compounds (Chapter 4).For the fabrication of graphene oxide based sensors, the GO is thermally reduced at low temperatures (<300°C) in the atmosphere. This process leads to a partial reduction of graphene oxide (partially reduced graphene oxide, prGO), which increased its conductivity and simultaneously enabled the retention of its functional groups. These functional groups are important because they facilitate the interaction with other molecules. prGO was used to fabricate: a) chemical sensors for detecting vapor analytes and b) biosensors for protein and DNA detection (Chapter 5). Finally, the prGO sensors were integrated into a micro-laboratory on PCB (Lab on PCB,LOPCB). PCB technology facilitates the integration of all the essential elements in a microlaboratory on a chip (i.e. heating elements, electrical interconnections), while at the same time it is a technology that enables mass production (Chapter 6). The Lab on PCB incorporates a unit for the amplification of the genetic material and a unit for the detection of the amplified genetic material using prGO biosensors. It should be noted, that this technology can be easily transferred to flexible substrates. At the end of the dissertation (Chapter 7) the main results and conclusions are presented together with the prospects for future research.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2019
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Filippidou, Myrto-Kyriaki
- Φιλιππίδου, Μυρτώ-Κυριακή
Subjects
dc:subject × 26- Αισθητήρες
- Xημικοί αισθητήρες πολυμερών
- Aισθητήρες παραμόρφωσης
- Βιοαισθητήρες
- Γραφένιο
- Οξείδιο του γραφενίου
- Ανηγμένο οξείδιο του γραφενίου
- Oλοκληρωμένα μικροεργαστηρία σε πλακέτες τυπωμένου κυκλώματος
- Oλοκληρωμένα μικροεργαστήρια σε ψηφίδα
- Sensors
- Polymer based chemical sensors
- Strain sensors
- Biosensors
- Graphene
- Graphene oxide
- Reduced graphene oxide
- Lab-On-PCB devices
- Lab-On-Chip devices
- Φυσικές Επιστήμες
- Άλλες Φυσικές Επιστήμες
- Επιστήμες Μηχανικού και Τεχνολογία
- Άλλες Επιστήμες Μηχανικού και Τεχνολογίες
- Natural Sciences
- Other Natural Sciences
- Engineering and Technology
- Other Engineering and Technologies
Rights
dc:rights- Statement dc:rights
-
- BY_NC_SA
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/46259