National Technical University of Athens (NTUA)
Μικρομηχανική συμπεριφορά του πετρώματος γύρω από ανοίγματα
Abstract
dc:descriptionThe presented Doctoral Thesis consists of a laboratory and a numerical investigation of the rock’s micro- and macro-fracturing around openings in compression. Physical models of underground openings in rock under compression are studied in the laboratory, using combined the acoustic emission (AE) analysis and the digital image correlation (DIC) technique. Numerical modelling may be helpful in order to link the laboratory results with the field scale observations for the safer design and construction of deep tunnels and mining drifts, extraction sites, deep drilling etc. The examined hollow plates of six (6) different calcitic and dolomitic materials show two (2) different types of fracture pattern and fracturing behaviour: one newly observed and a second one which is known from the literature. Regarding the dolomitic physical models and the literature, in uniaxial compression or at low confinement, primary fractures initiate at the upper- and lower-hole’s boundary, extending upwards and downwards respectively, due to the high tensile stress concentration at these regions. Then, remote fractures initiate at either sides of the opening, propagating sub-vertically, and interacting with the upper and lower model’s surface and with the regions of high compressive stress concentration at the opening’s sidewalls. At these areas, the third phenomenon occurs, which is commonly referred to in the literature with the conventional term “spalling”. Regarding the calcitic marbles, remote fractures could not always be distinguished. Instead, oblique zones of a conjugate system of shear zones appear diagonally connecting the opening’s sidewalls with the corners of the model. Furthermore, the fracturing phenomena on physical models of two different dolomitic marble’s varieties with two horizontal parallel pre-existing cylindrical holes of various diameters and relative distance, with centrelines aligned to the specimen’s bases, are examined under uniaxial compression. The fracture pattern of each material and the respective differences are presented. The combined application of DIC technique and AE analysis allows for the reliable quantification of the fracturing phenomena in these fine grained, crystalline or not, calcitic and dolomitic materials, banded or not, that otherwise their observation may be uncertain and their determination questionable. Moreover, by the suitable experimental setup and a specialized post-processing of the acoustic emission signals allowed for the location analysis of the signal’s sources on the calcitic marbles. Also, a stereoscopic microscope is used, where necessary, in order to enlighten the fracturing condition of the plate specimens. Physical models such as those presented herein may be useful as reference for materials with behavioural types different from those previously published in the literature. Furthermore, they provide an insight to the marble fracturing process around openings, which is necessary for the understanding of the implications associated with underground marble exploitation, and facilitate the transferring of the laboratory knowledge to the field. For the second part of the current Doctoral Thesis, the laboratory experiments on the aforementioned physical models, as well as on models from the literature, are simulated numerically with a Bonded Particle Model (BPM) by employing the two- and the three-dimensional versions of Itasca’s Particle Flow Code (PFC). Plaster is calibrated with the 3D BPM and the linear parallel bond model while the crystalline rocks with the 2D BPM and the flat-joint model. Then, the experiments on the physical models are simulated. The micro-cracking, the fracturing process and the sequence of their appearance during the numerical tests of the hollow plates are in good agreement with the laboratory tested physical models. The fracture pattern of the numerical specimens is similar to the one of the physical models, while the regions of micro-cracking in the numerical models is quite similar to the regions of intense deformation observed from DIC analysis on the respective physical models. Additional numerical investigation is performed quantifying the stress distribution along and normal to the primary fracture’s path during the numerical compression test. These synthetic materials which behave for all the simulated tests similarly to the physical ones, independently of their geometry’s complexity, may now be used for more advanced simulations and research, both in the laboratory and the field scale. Finally, an analysis is presented and described, which results in a formula that predicts the required applied axial stress for the primary fracture initiation of a single cylindrical opening in compression.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2019
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Lotidis, Michail
- Λοτίδης, Μιχαήλ
Subjects
dc:subject × 35- Μηχανική των πετρωμάτων
- Υπόγεια ανοίγματα
- Μικρομηχανική συμπεριφορά του πετρώματος
- Θραύση του πετρώματος
- Έναρξη πρωτογενούς ρωγμής
- Πλευρικές αποφλοιώσεις
- Φυσικά μοντέλα
- Συσχέτιση ψηφιακών εικόνων
- Ακουστική εκπομπή
- Μοντέλο συνδεδεμένων σωματιδίων
- Αριθμητικά μοντέλα
- Αναλυτική σχέση
- Rock mechanics
- Underground openings
- Micromechanical rock behaviour
- Rock fracture
- Primary fracture initiation
- Sidewall spalling
- Physical modelling
- Digital image correlation
- DIC
- Acoustic emission
- AE
- DΕM
- Bonded particle model
- BPM
- PFC
- Numerical modelling
- Formula
- Επιστήμες Μηχανικού και Τεχνολογία
- Μηχανική Υλικών
- Περιβαλλοντική Μηχανική
- Engineering and Technology
- Materials Engineering
- Environmental Engineering
Rights
dc:rights- Statement dc:rights
-
- BY_NC_ND
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/46309