Back to search

National Technical University of Athens (NTUA)

Development and application of computational algorithms and thermodynamic models for multiphase, multicomponent chemical systems

Abstract

dc:description

Fossil fuels are by far the most widely used energy source accounting for approximately 80% of the total worldwide. The demand for coal experienced some stagnation in recent years while oil and natural gas demand continues to increase with the latter exhibiting by far the fastest growing demand among the three. Natural gas is considered “the cleanest” fossil fuel source of energy. Closely related to the need for cleaner energy sources is also the role of natural gas in chemical conversion processes to ultraclean fuels and other added-value products used by the chemical industry.To respond to the increased demand for natural gas and oil products, more than 3.5 million km of pressurized pipelines have been constructed worldwide to transport huge amounts of hydrocarbons. Furthermore, significant amount of research has been conducted for the development of new technologies that aim to reduce the levels of carbon dioxide (CO2) in the atmosphere, with the most mature being the Carbon Capture and Sequestration (CCS). An important part of the CCS process is the transportation of a CO2-rich stream from the capture site to the sequestration site and in most cases this is done via pipelines. The two factors that have contributed to this extensive use of pipelines are safety and cost effectiveness. Despite the fact that pipelines are considered to be the safest mode for transportation of gas mixtures, they present significant safety challenges related to their operation and maintenance.Preliminary and detailed design, simulation and optimization of a transport process require, among others, accurate knowledge of the physical properties of the chemical system involved as functions of temperature, pressure and composition. Quite often, the system exists in more than one phase (i.e., liquid, vapor and/or solid) and as a result process design calculations have to take into account the phase equilibrium conditions and also the composition of the relevant phases and the respective physical property values. Furthermore, rigorous mathematical tools can be used to accurately assess and improve the safety of high pressure transportation pipelines. These mathematical tools entail the development of a pipeline rupture outflow model in the form of computational fluid dynamics (CFD) simulations. Development of reliable pipeline rupture mathematical models that account for single and multi-phase heterogeneous flows rely heavily on the accurate knowledge of various physical properties of the fluid(s) involved and the phase equilibrium conditions.Calculation of the physical properties and phase equilibria of mixtures is typically performed with Equations of State (EoS). The two challenges that arise here are the accurate prediction or correlation of the physical properties of the system and the conditions in which the system splits into two or more coexisting phases. Furthermore, calculation of phase equilibria itself using EoS presents various computational challenges and the need for robust algorithms has driven a wealth of mathematical formulations for the phase equilibrium problem. Finally, coupling complex EoS with CFD simulators entails the challenge of providing the physical properties of the chemical system involved and the calculation of phase equilibrium at a specific state, without significant increase of the computational cost and at same time retaining the robustness of the differential equation solver.In this PhD thesis, the development, application and evaluation of thermodynamic models for the accurate prediction of two-phase / multiphase (solid, liquid, vapor) equilibria and physical properties of complex chemical mixtures, with significant interest in industrial and environmental applications, were studied. The mixtures under study included binary and multicomponent mixtures of CO2 associated with CCS processes and oil-natural gas derived mixtures with the main components being methane (CH4) and ethylene (C2H4). The CH4 mixtures are mainly asymmetric hydrocarbon mixtures which are extracted from high pressure-high temperature (HPHT) oil reservoirs, while the C2H4 mixtures studied occur from its production process by ethane steam cracking. The models applied for the fluid phases include cubic (Soave-Redlich-Kwong, SRK, Peng-Robinson, PR) and Statistical Associating Fluid Theory (SAFT) based EoS (Perturbed Chain-SAFT, PC-SAFT, SAFT with the Mie potential of variable range, SAFT-VR Mie), while several approaches for the solid phase were utilized and further developed, including different reference state models and a solid-phase EoS for CO2. Two-phase (vapor-liquid, liquid-liquid, solid-liquid, solid-gas) and three-phase (vapor-liquid-liquid, solid-liquid-liquid, solid-liquid-gas) equilibria of mixtures were studied, while physical properties, important for pipeline design and operation, such as density, speed of sound, Joule-Thomson coefficient etc. were considered. Furthermore, efficient and robust algorithms for the direct calculation of saturation points, as well as, the sequential construction of phase diagrams of binary and multicomponent mixtures were developed and an efficient technique for rapid and robust coupling of thermodynamic calculations with CFD models for pipeline decompression simulations was proposed.Several useful conclusions are drawn from this work, while the methods proposed here are expected to be of immense importance for the oil & gas industry in the near future. The new algorithms for direct saturation point calculations tackle successfully the problem of the multiplicity of solutions in the retrograde regions of phase diagrams and proved to be efficient and robust tools, even in very challenging conditions. New Euler-Newton predictor-corrector methods were proposed that are capable of handling different types of phase behavior and trace common phase diagrams as well as more unusual cases like open-ended dew lines with multiple critical points, double retrograde behavior etc. The cubic and SAFT based EoS considered in this work, predict / correlate with similar accuracy the vapor-liquid equilibrium (VLE) of CO2, CH4 and C2H4 – the three major components considered in this thesis – binary mixtures with other gases and low molecular weight hydrocarbons that occur in the respective processes. The vapor phase composition of these mixtures is correlated better with the cubic EoS in the region where the pressure maximum of the P-x,y phase diagram corresponds to a critical point. SAFT type EoS correlate more accurately the liquid phase composition, in expense of the critical point overshooting and the deterioration of the vapor phase description. The VLE of binary CH4 mixtures with long-chain normal alkanes (n-alkanes) was also studied and Gibbs Ensemble Monte Carlo simulations (GEMC) were combined with EoS to develop a predictive methodology for the calculation of the VLE of multicomponent hydrocarbon mixtures with high asymmetry. It was observed that, with increasing asymmetry, PC-SAFT EoS is more successful in correlating the low temperature binary VLE data and cubic EoS the high temperature data. Overall, the EoS binary interaction parameters (BIPs) regressed from GEMC simulation data lead to equally accurate modeling results for multicomponent mixtures, compared to those regressed from experimental binary mixture data. Furthermore, the solid-liquid-gas equilibrium (SLGE) study of the respective binary mixtures showcased the effect of various terms of the combined models (solid-phase model coupled with a fluid-phase EoS) considered in this work, which led to targeted modifications and very accurate modeling results, even at high pressures.Most of the physical properties of pure C2H4 are predicted with relatively high accuracy by PC-SAFT and SAFT-VR Mie EoS, with none being clearly superior to the other. Both SAFT EoS are more accurate than PR in predicting the pure C2H4 physical properties overall.A technique for the rapid interpolation of thermodynamic properties of mixtures for the purposes of simulating two-phase flow was initially developed to simulate the experimental decompression of CO2-rich mixtures. This technique was extended to handle the critical and supercritical region of multicomponent mixtures, while retaining accuracy and computational efficiency. The extension was a prerequisite for performing numerical simulations of pipeline decompression for a ternary ethylene mixture with impurities and results were validated against full-bore rupture experimental data.In conclusion, this thesis referred to the development, validation and application of robust algorithms and thermodynamic models for phase equilibrium calculations of binary and multicomponent mixtures with emphasis to gas mixtures.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2019

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Nikolaidis, Ilias
  • Νικολαϊδης, Ηλίας

Subjects

dc:subject × 4

Rights

dc:rights
Statement dc:rights
  • BY
Language dc:language
eng

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/46323

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Nikolaidis, Ilias; Νικολαϊδης, Ηλίας. Development and application of computational algorithms and thermodynamic models for multiphase, multicomponent chemical systems. National Technical University of Athens (NTUA), 2019. http://hdl.handle.net/10442/hedi/46323