Back to search

University of Patras

Εκτίμηση της επίδρασης των ορυκτοπετρογραφικών χαρακτηριστικών στις φυσικομηχανικές ιδιότητες μαγματικών πετρωμάτων της Κεντρικής Μακεδονίας: αξιολόγηση της συμπεριφοράς τους ως αδρανή υλικά σε κατασκευαστικές και περιβαλλοντικές εφαρμογές

Abstract

dc:description

Aggregate materials are considered to be rock blocks which are used either individually or by using an adhesive in constructions. Their term as aggregates encompasses the concept of chemical inertia against any adhesive cement. However, these materials are chemically active determining the behavior of the mass in which they are involved. The present thesis uses natural aggregates and more specifically the igneous rocks derived from Veria-Naousa and Edessa region, as reusable mineral reactive materials by investigating the influence of their mineralogical and petrographic characteristics both on their properties as aggregate materials and on their properties in construction and environmental applications. For this reason, 39 rock samples, of ten different igneous lithotypes, were collected and investigated. The majority of the studied samples are igneous rocks which belong to the Veria-Naousa and Edessa ophiolite complexes, while the rest of them have been collected from their surrounded areas without having any genetic relationship with the first. In more detail, from the aforementioned areas, 14 ultramafic rock samples as well as 10 mafic rock samples were collected, evenly distributed over the wider area of the two investigated ophiolite complexes. Moreover, 6 Pleiocene volcanic rock samples belonging to the subsequent volcanic eruption of Almopia were collected and examined. Finally, 9 granitoid rock samples were also collected in order to investigate their properties. In the total of the already mentioned lithotypes, the interdependence of their properties related to their mineralogical and petrographic characteristics as well as their suitability as concrete aggregates were investigated. Particular emphasis was placed on the study of the effect of secondary phyllosilicate minerals on both the properties of the aggregates and on the final behavior of each technical application wherein contained in order to better understand and predict the potential failures in various construction applications.In addition, in order to investigate the direct supervisory (qualitative and quantitative) influence of the type of the used aggregate on the produced concretes, 64 concrete specimens were prepared from 32 different mixes of igneous rocks for the identification of the influence of the mineralogical and petrographic characteristics of the studied rocks on the final strength as well as on the final quality of the produced concretes. Concrete constitutes a chemically complex mix of cement, water and aggregate materials in various sizes and proportions. The aggregate materials are the basic component of this mixture and therefore possess one of the most important factors in the final quality of the concrete produced. The aggregates contained in concrete, possessing specific proportions of minerals, are active chemical phases where they constantly react with the other components of the concrete to determine its final quality. The most important characteristics of concrete aggregates, which were found to be likely to adversely affect the final mechanical strength of the product, were found to be their surface texture (microroughness), their physical properties, the existence of swelling clay minerals and their uniaxial compressive strength. Moreover, in this thesis, following the principles of cyclic economy and sustainability, the mineral raw materials, evaluated as aggregates and as concrete aggregates, were reused in order to solve a major environmental problem, which focuses on the remediation, in lab scale, of the drainage waste water of Agios Philippos mine (Kirki, 17 km NNW of Aleksandroupoli) which is continuously supplied by meteoric waters that lead to the pit after first having decomposed oxidized mineral ores and particularly sulphides of the open excavation. The oxidation of the sulphide ores of the investigated area occurs through a series of reactions involving direct, indirect and bacterially controlled mechanisms. Some oxidation reactions result in the production of instant acidity, while others cause the dissolution and the removal of heavy metals. During this thesis, for the remediation of the mentioned phenomenon in lab scale, static as well as experimental electrically continuous flow driven forced devices were constructed using multi-mineral line filters. Particularly effective with regard to pH remediation but also to removal or significant reduction of heavy metal concentrations such as Fe, Cu, Pd, Zn has been shown to affect the reuse of magnesite, serpentinite, peat and biochar within the filters of the experimental devices.

Degree

thesis:*
Grantor dc:publisher
University of Patras
Year dc:date
2019

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Petrounias, Petros
  • Πετρούνιας, Πέτρος

Subjects

dc:subject × 11

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/46484

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Petrounias, Petros; Πετρούνιας, Πέτρος. Εκτίμηση της επίδρασης των ορυκτοπετρογραφικών χαρακτηριστικών στις φυσικομηχανικές ιδιότητες μαγματικών πετρωμάτων της Κεντρικής Μακεδονίας: αξιολόγηση της συμπεριφοράς τους ως αδρανή υλικά σε κατασκευαστικές και περιβαλλοντικές εφαρμογές. University of Patras, 2019. http://hdl.handle.net/10442/hedi/46484