University of Patras
Διερεύνηση λειτουργίας μετατροπέων μείωσης της περιττής επεξεργάσιμης ισχύος (R2P2) για εξοικονόμηση ενέργειας σε μέσα μεταφοράς
Abstract
dc:descriptionDue to the reduction of energy resources from fossil fuels, energy-saving methods for meansof transport are constantly being sought. In particular, the need for energy savings is imperative in the maritime, due to the slow evolution of all electric ships and the mandatory compliance with regulations on emission reduction. One of the saving methods can be a waste heat recovery system (WHRS), where the thermal energy of fuels is converter to electrical energy via thermoelectric generators (TEGs). The produced electrical power can be supplied to the ship electrical grid, thus increasing its efficiency and reducing its environmental footprint.The main purpose of this PhD dissertation is to study such a system. In particular, the appropriate power electronics boost converters are sought to adjust the voltage level of the TEGs to the voltage level of the interconnection bus, since the TEGs produce a relatively low voltage. For this purpose, a family of converters which are formed on the concept reduced redundant power processing (R2P2) is investigated. In addition to this, an appropriate control strategy is required to regulate the injection of the power generated by the TEGs to the ship grid. Initially, various cases of connections and configurations of the non-isolated R2P2 convertersare investigated. Consequently, the investigation focuses on the R2P2 converters, which include as internal converters the non-isolated classical topologies, namely the Buck, Boost and Buck- Boost converters. Based on these cases, a method of classifying all the implementable topologies is proposed. As a next step, the theoretical relations of voltage gain and efficiency of the R2P2 implementable topologies are derived, based on the electrical characteristics (voltage gain andefficiency) of the individual converters that they consist of. These relationships apply to alloperating areas of an R2P2 converter. In addition, the R2P2 topologies are compared in terms of their voltage gain and efficiency, so that a combination (or combinations) that are suitable for a given application can be selected. Furthermore, the existence of four operating areas in the family of R2P2 converters is presented. In order to show this, the operation of the R2P2 I-IIA Buck-Boost + / Boost- is analyzed. This converter is chosen because it experiences one of the highest voltage gains among all R2P2 configurations. Theoretical relations for all four operating areas of the selected converter are formed, based on the equations which describe the operation of its individual converters. In this way, it is proven that the general relations which were formed for an R2P2 topology can be applied to all of its operating areas. This analysis can be extended in all R2P2 converters. In addition to the theoretical analysis, it is proven through experimental results that the R2P2 I-IIA Buck-Boost+/Boost- has low efficiency, so it is eventually considered unsuitable for high voltage gain high power applications. Then, the optimization of the efficiency of the R2P2 converters is examined. After developinga loss model for the individual inverters, an optimization algorithm is employed to find the combination of their voltage gains, with which the optimum overall efficiency is achieved. This method is applied to the R2P2 I-IIB Buck-Boost + / Boost + converter. This converter is chosen, because it experiences the optimum combination of high voltage gain and high efficiency, so it is considered the most suitable for the proposed WHRS. Moreover, the effect of the parasitic elements on the voltage gain of R2P2 converters is investigated. This analysis is conducted in the selected R2P2 I-IIB Buck-Boost + / Boost +converter for ideal and non-ideal elements, presenting detailed relations of its voltage gain for both of its operational areas. Finally, a waste heat recovery system for a ship with DC bus is proposed, analyzed and simulated. The proposed system includes the thermoelectric generators and the selected I-IIBBuck-Boost + / Boost + converter. The behavior of the system under various operating conditions is studied. Furthermore, an algorithm that forces the TEGs to produce specific power according to one reference is proposed. This algorithm includes both a maximum power point tracking operation, but also the operation of the TEGs in different operating points, where the power is not necessarily maximized. This method allows the WHRS to fully correspond to the demand of any local loads connected to the DC bus. Also, the proposed control strategy can be extended to AC systems with fault ride through capability, where simultaneous control of active and reactive power is needed.
Degree
thesis:*- Grantor dc:publisher
- University of Patras
- Year dc:date
- 2019
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Zogogianni-Vekic, Charoula
- Ζωγόγιαννη-Βέκιτς, Χαρούλα
Subjects
dc:subject × 26- Εξοικονόμηση ενέργειας
- Μέσα μεταφοράς
- Συστήματα ανάκτησης ενέργειας
- Θερμοστοιχεία
- Μετατροπείς μείωσης της περιττής επεξεργάσιμης ισχύος
- Μη απομονωμένοι μετατροπείς
- Βελτιστοποίηση
- Απώλειες αγωγής
- Μαγνητικές απώλειες
- Διακοπτικές απώλειες
- Έλεγχος απομαστευόμενης ισχύος
- Energy savings
- Means of transport
- Waste heat recovery
- Thermoelectric generators
- Reduced redundant power processing converters
- Non-isolated converters
- Optimization
- Conduction losses
- Magnetic losses
- Switching losses
- Control of power flow
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Ηλεκτρολόγου Μηχανικού, Ηλεκτρονικού Μηχανικού, Μηχανικού Η/Υ
- Engineering and Technology
- Electrical Engineering, Electronic Engineering, Information Engineering
Rights
dc:rights- Statement dc:rights
-
- BY_NC
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/46513