Back to search

Aristotle University Of Thessaloniki (AUTH)

Παραγωγή χημικών ενώσεων υψηλής προστιθέμενης αξίας μέσω προηγμένων καταλυτικών χημικών διεργασιών μετατροπής βιομάζας

Abstract

dc:description

The progressive increase in global energy demands, the fluctuations of crude price, the gradual depletion of worldwide fossil raw materials and mostly the concern over the protection of the environment, have fueled the interest of both industry and the scientific community for alternative, environmentally-friendly and renewable sources for energy, fuels and chemicals. Towards this direction, lignocellulosic biomass has been identified as one of the most promising alternative, sustainable and renewable carbon source for the production of fuels and chemicals, due to its abundance and suitable chemical composition. Cellulose, the main structural component of biomass, can be converted to a wide variety of valuable platform chemicals such as 5-HMF and lactic acid, via its hydrolysis to glucose which acts as intermediate chemical. 5-HMF is a versatile furanic compound that can be transformed to a wide range of commodity chemicals and products, and lactic acid is the most widely occurring hydroxycarboxylic acid, with extensive applications in food and chemical industry, pharmaceuticals and plastics. As far as 5-HMF is concerned, it can be produced from glucose either by dehydration in the presence of an acid catalyst (Brönsted acidity), or through isomerization of glucose into fructose (Lewis acidity) and subsequent fructose dehydration (Brönsted acidity). Respectively, lactic acid can be also synthesized from glucose via isomerization to fructose which then follows the retro-aldol pathway instead of the dehydration reaction. The proper selection of experimental conditions and reaction medium is unambiguously connected with the catalyst used, all being responsible for stirring the reactions towards the desired products.The first part of the present study deals with the catalytic conversion of cellulose towards glucose in aqueous medium, as well as with cellulose conversion towards 5-HMF and lactic acid (LA) in one-pot process (via intermediate glucose formation). A primary screening of the catalysts was performed at standard reaction conditions (175 οC, 60 min), while main focus was paid at the correlation of activity with their acidic properties. According to the obtained results, best performing catalyst for cellulose hydrolysis to glucose proved to be H2SO4 (cellulose conversion 58.3 %, glucose selectivity 71.5 %), while the catalytic activity of zeolite H-ZSM-5 (SiO2/Al2O3 ratio = 80) was also proved significant (cellulose conversion 58.3 %, glucose selectivity 71.5 %). All the catalysts tested (Cu-ion-exchanged zeolites, SO4- and PO4-ΤιΟ2, supported POMs on metal oxides) demonstrated poor catalytic activity towards the production of 5-HMF, contrary to the production of lactic acid for which most of them (POMs/metal oxides) proved quite effective. Among them, TSA/SiO2-Al2O3 revealed the best catalytic performance (61.2 % cellulose conversion, 38.4 % LA selectivity) and therefore was selected for further study with the aim to investigate the effect of reaction conditions, catalyst/cellulose ratio, cellulose’s crystallinity and the presence of other biomass components of a real biomass feed on products distribution. A kinetic study of the reaction was also conducted, suggesting that lactic acid is the main product of cellulose conversion in the presence of TSA/SiO2-Al2O3 catalyst, with the initial cellulose hydrolysis being the key (slow) step for its formation.The second part of the present study deals with glucose decomposition via isomerization towards fructose and subsequent fructose conversion towards 5-HMF and lactic acid, as the cascade steps of an overall process of biomass conversion. Various catalysts (K- and Sn-ion-exchanged or impregnated zeolites and metal oxides) were studied for each reaction, while increased interest was placed on the effect of catalysts’ acidity and/or basicity on products selectivity. In the case of the isomerization reaction, the effectiveness of commercial and low cost natural MgO material was highlighted (44.0 % glucose conversion, 75.8 % fructose selectivity). Regarding glucose and/or fructose conversion to 5-HMF and/or lactic acid, the catalytic activity of Sn20/γ-Al2O3 was proved significant for the synthesis of both 5-HMF (27.7 % selectivity) and lactic acid (16.6 % selectivity) from glucose (99.5 % conversion), while the best performing catalyst for fructose conversion to 5-HMF proved to be H-Mordenite zeolite (94.1 %, fructose conversion, 69.4 % 5-HMF selectivity). In the case of Sn-catalysts, products selectivity was significantly affected by Sn valence and catalyst acidity. In the presence of the best performing catalyst for each reaction, the effect of reaction conditions, catalyst/feed ratio and solvent was further investigated. In the case of isomerization reaction, a kinetic study was also performed over MgO catalyst, verifying that the reversible isomerization reactions of glucose ↔ fructose proceeded equally and under the highest kinetic rates, whereas the epimerization reactions of glucose and fructose towards mannose, as well as sugars degradation reactions, featured the lowest ones.In the last part of the thesis, the important issue of product isolation and purification of the targeted chemical(s) from the final mixture of the overall production process, was examined, with the main focus placed on the effective recovery of 5-HMF. Solid-liquid and liquid-liquid extraction were the two methods used for the recovery of 5-HMF from H2O and DMSO/H2O (4/1) solutions, respectively. The presence of DMSO significantly affected the distribution of 5-HMF between the two phases in all studied cases. Best recovery solvent for 5-HMF from H2O was proved to be ethyl acetate, while in the case of DMSO/H2O (4/1) mixture the highest recovery of 5-HMF was achieved with a dichloromethane/THF (1/4) mixture. These solvents were selected for further study with the aim to design a protocol for selective and quantitative 5-HMF recovery from the final liquid product of the overall process.Finally, based on the experimental results obtained from each possible reaction stage (i.e. cellulose hydrolysis to glucose, glucose isomerization to fructose and fructose conversion to 5-HMF and/or lactic acid) the optimum overall processes for the production of 5-HMF and lactic acid from cellulose/biomass was proposed and presented in detail through the respective process flow diagrams.

Degree

thesis:*
Grantor dc:publisher
Aristotle University Of Thessaloniki (AUTH)
Year dc:date
2019

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Marianou, Asimina
  • Μαριανού, Ασημίνα

Subjects

dc:subject × 12

Rights

dc:rights
Statement dc:rights
  • BY_NC_SA
Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/46526

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Marianou, Asimina; Μαριανού, Ασημίνα. Παραγωγή χημικών ενώσεων υψηλής προστιθέμενης αξίας μέσω προηγμένων καταλυτικών χημικών διεργασιών μετατροπής βιομάζας. Aristotle University Of Thessaloniki (AUTH), 2019. http://hdl.handle.net/10442/hedi/46526