Back to search

Harokopio University

Modeling and design of coupled racetrack and microring structures for telecommunication and sensing applications

Abstract

dc:description

The purpose of this PhD thesis is to present methods of optimally designing microring resonators as well as racetrack resonators for their use in optical filter and optical sensing applications respectively. Using various extensions of the modeling techniques already applied in the literature, namely an alternative form of coupled mode theory (CMT), the transfer matrix method (TMM), we came up with accurate analytical and semi/analytical model for the device transfer function that are more easily applicable, using considerably less resources and time compared to existing models found in literature. We then proposed figure of merits for characterizing the performance of the design in order to finally find the optimal design through optimization techniques. Initially we considered the optimal microring resonator design case for use in optical filtering applications. Due to the increased number of input parameters in our model, we used an interior point algorithm optimization method, which converts the original minimization problem of figure of merit in a series of similar minimization problems based solely on equalities and other constraints. Such problems are more easily solved by the use of methods such as conjugate gradient etc., the analysis of which is out of the scope of this thesis. The figure of merit we chose in this case was analogous to the difference of our layout transfer function from a sixth degree Gaussian function, which is considered an ideal transfer function for use in filters. On the other hand, in the case of optimal design of racetrack resonator devices for use in optical sensing applications, where the input parameters of our model are limited in number, we opted to use the exhaustive search method while checking for any restrictions we initially set. With this procedure, if the constraints are satisfied, we calculate the figure of merit for each combination of values and store these values. During the exhaustive search, we keep the combination of parameters for which we calculated the minimum value for the figure of merit, which in this case is proportional to the frequency range of the detection area. At this point it should be emphasized that in both of the above cases the range of input parameters of our models was chosen in such a way that it is possible to implement the calculated layout based on the state-of-the-art materials and manufacturing methods. Even if these change in the future, with the discovery of new materials and methods, our model can also support them simply by varying the range of input parameters. After completing our calculations, we came up with optical filters and optical detectors with improved features over the existing ones in the literature, which can be implemented using the materials and manufacturing methods available today.

Degree

thesis:*
Grantor dc:publisher
Harokopio University
Year dc:date
2019

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Dogkas, Leonidas
  • Δόγκας, Λεωνίδα

Subjects

dc:subject × 12

Rights

Language dc:language
eng

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/46751

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Dogkas, Leonidas; Δόγκας, Λεωνίδα. Modeling and design of coupled racetrack and microring structures for telecommunication and sensing applications. Harokopio University, 2019. http://hdl.handle.net/10442/hedi/46751