Back to search

National Technical University of Athens (NTUA)

Ανάπτυξη μικροοργανισμών στην εφοδιαστική αλυσίδα των πετρελαιοειδών και επιπτώσεις από τη χρήση ανανεώσιμων υποκατάστατων

Abstract

dc:description

The current thesis focuses on the study of microbial growth in conventional petroleum products and the impact of renewable and alternative fuels in the fuel supply chain. In accordance with the current environmental trends, the European guidelines and the fuel quality standards, encourage the addition of biofuels and alternative energy sources into the conventional fuels used in the automotive and marine sector. Specifically, EN 590 and EN228 quality standards mandate the substitution of automotive diesel and unleaded gasoline for biodiesel (up to 7% v/v) and bioethanol (up to 10% v/v), respectively. In the same direction, the latest version of ISO 8217 refers to the addition of biofuels, such as FAME and HVO, in distillate marine fuels and includes additional specifications for DF grades (DFA, DFZ, DFB) containing FAME up to 7% v/v. Taking into account the microbial contamination incidences in the diesel fuel supply chain, which are mainly attributed to the addition of biodiesel, it is rather interesting to investigate the impact of the potential renewable and alternative substitutes for petroleum products on their microbial stability. Extensive emphasis is also given to the the evaluation of the effectiveness of current and future strategies that could be applied in order to remedy the microbial contaminated fuel systems.Based on the aforementioned, in the first part of the thesis, the impact of the addition of renewable and alternative substitutes on the microbial stability of conventional diesel fuel, unleaded gasoline and marine distillate fuels was examined. Initially, the behavior of renewable and synthetic fuels, which can substitute or fully replace automotive diesel, against the proliferation of microorganisms, has been investigated. Among the examined fuels, biodiesel proved to be more susceptible to microbial growth, while the rest of biofuels and synthetic fuels showed at least the similar behavior against microbial activity with that of the conventional petroleum diesel. Parameters, such as fatty acid composition or branching in the fuel molecules, appeared to play a significant role. Subsequently, a series of alcohols referred as renewable oxygenated components of unleaded gasoline - EtOH, IPA, TBA – generally contributed to the inhibition of microbial activity. Similarly, alcohols are also considered as possible substitutes for conventional diesel fuel and, in particular, butanol seems to be the predominant candidate as it exhibits better stability than ethanol. Consequently, the effect of butanol on diesel/biodiesel blends concerning the fuel quality parameters, especially microbial and oxidation stability, was investigated. Butanol was able to upgrade the stability - oxidation and microbial - of the the binary blends, B7 and B20, at the examined mixing ratios. Similar research was also carried out on two typical conventional marine distillate fuels, after the addition of four different types of FAME and two alternative paraffinic diesel fuels (HVO and GTL) at the maximum permitted rate for FAME, designated by ISO 8217:2017, i.e. 7% v/v. According to the findings, the presence of FAME in marine fuels creates a more favorable environment for micro-organisms and therefore their proliferation was easier and faster. On the other hand, marine gasoils and their mixtures with HVO and GTL were not found to be inhibitory substrates for microbes although the microbial activity was more restricted. However, in the contrary of FAME, these substitutes did not enhance the microbial proliferation. In the second part of the thesis, the application of both a commercial antimicrobial agent and a series of other additives that are commonly used in the diesel/biodiesel fuel systems in order to deal with an existing microbial contamination was well-studied and evaluated. In particular, the effect of a commercially available antimicrobial product on the microbial stability of biodiesel and the corresponding B7 blend at different concentrations and time intervals was examined. The efficacy of the biocidal product was examined by determining the insoluble solids and the active microbial load. The concentration of the insoluble particles was identified by a method, which was developed in the terms of the current thesis, based on the determination of the total solids of the aqueous and fuel phase by using filtration techniques. This methodology can lead to a quantitative assessment of the undesirable biomass formations caused by the microbial metabolic processes and give an initial estimation of the potential microbial growth before using exclusive microbiological techniques. According to the obtained results, it was observed that the presence of the examined biocide could inhibit the microbial growth in B7 blend but it was almost uneffective in the case of FAME. Furthermore, the strategy of treating fuels with a biocidal product at a high concentration, which is referred as the most common controlling action, proved to be douptful, as the concentration of suspended particles has not been affected although a considerable reduction in active bioburden has been achieved. Subsequently, the effect of various additives on the microbial stability of diesel/biodiesel blends was also examined. Antioxidants, cetane number and cold flow properties improvers as well as cleaning and anti-corrosion agents are the most common types of commercial chemical additives applied to these kinds of fuels. Ten antioxidant phenolic substances were added to two types of biodiesel at concentrations of 1000, 200 and 50 ppm and the most active ones to the respective B7 blends. Among the examined phenolic compounds, hydroquinone (TBHQ) and both catechols (MCT and TBC) proved to be quite effective as antimicrobial additives. Satisfactory antimicrobial activity was also observed in the case of PY and PG whereas the antimicrobial properties of phenolic acids (CFA, GA and PCA), although exhibiting good antioxidant activity, were not adequate, with the exception of hydroxycinnamic acid (CFA), which showed a modest level activity. Finally, the most common monohydric antioxidants - BHT and BHA – were not able to improve the microbial stability of both biodiesels. Finally, the antimicrobial activity of a series of representative commercial additives of diesel fuel - referred as cetane number, cold flow properties, multifuctional diesel improvers, metal deactivators and corrosion inhibitors - was assessed. At the recommended mixing ratio, CFPP and the cetane number improvers were able to restrict the microbial growth, while higher duration antimicrobial activity was recorded in the case of the diesel performance improver, metal deactivator and corrosion inhibitor. Beyond the recommended mixing ratio, no significant variations were observed in the case of CFPP and cetane number improvers, while the opposite results were obtained in the case of multi-package additive and the corrosion inhibitor, whose action was significantly affected at lower concentrations. The blends containing the metal deactivator appeared to be strong inhibitory substrates against the bacterial proliferation regardless of the applied dosage. Generally, it is concluded that a variety of factors may affect the extent of fuel microbial contamination and as far as the substitutes – renewable or not – are concerned, their kind or type may play a significant role on the proliferation of microbes, which may be either enhancing or limiting parameters. It is demonstrated that the use of various additives could be considered as a preventive remedial strategy in order to control the microbial activity in fuel systems but it should seriously taken into account that the application and handling of these products shall intend to retain and upgrade the fuel quality characteristics. Furthermore, the microbial growth in fuel systems is rather a dynamic biological phenomenon, in which the prevailing conditions may also an impact in the so called “high-risk” points of the fuel supply chain. Consequently, according to the findings of the current thesis, it is critical to review the current strategies as well as to study thoroughly and implement an integrated plan that focuses on the effective control of the fuel microbial contamination in such a way as to promote stability, upgrading and optimization of fuel quality parematers.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2019

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Tsesmeli, Chrysovalanti
  • Τσεσμελή, Χρυσοβαλάντης

Subjects

dc:subject × 10

Rights

dc:rights
Statement dc:rights
  • BY
Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/46762

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Tsesmeli, Chrysovalanti; Τσεσμελή, Χρυσοβαλάντης. Ανάπτυξη μικροοργανισμών στην εφοδιαστική αλυσίδα των πετρελαιοειδών και επιπτώσεις από τη χρήση ανανεώσιμων υποκατάστατων. National Technical University of Athens (NTUA), 2019. http://hdl.handle.net/10442/hedi/46762