University of Ioannina
Καταλυτική παραγωγή Η2 από νανοδομημένα υβριδικά υλικά σε χαμηλές θερμοκρασίες
Abstract
dc:descriptionIn the present PhD thesis, it was designed new effective molecular catalysts via wet chemistry methods, as long as nanoparticles with Flame Spray Pyrolysis (FSP). Those catalysts were studied for Η2 evolution , having as substrate Formic Acid (FA, HCOOH) or water. For this purpose, 2 independent catalytic systems have been created, in homogeneous and heterogeneous phase that contribute to the elimination of those substrates via different mechanisms. More specifically: Ι. Molecular systems included Ruthenium complexes, with tetradentic and monodentic phosphine ligands (PPh3 & PP3) were evaluated for FA dehydrogenation. Those catalysts were highly selective as long as it was not detected CO, but only Η2 and CO2 in ratio [1/1]. Knowing the necessity of cocatalyst existence in order to be succeeded higher yields by ruthenium complexes, we use the solid Η2Ν@SiO2 nanoparticles. For the first time, it was replaced the high amounts of liquid bases- usual ratios of [Ru/amine]>[1/40] or [FA/amine =5/2]- with a solid cocatalyst where the ratio was [Ru/-NH2]=[1/1] or [FA/-NH2=500/1]. In this case it was succeeded at almost 700 % higher TONs in comparison with systems that did not have cocatalyst, while the same amount of corresponded liquid n-propylamine, had a H2 yield at almost 6 times lower. Arrhenius analysis revealed that the higher FA dehydrogenation capacity, it was contributed to the lower Activation Energy Eα that it was ~35% lower. Moreover EPR spectroscopy revealed that it was necessary the combination of FA/amine or FA/H2N@SiO2, in order to be succeeded the reduction of Ru(III) to catalytically active centers Ru(II). It was proven that the key point of this study it was the self-assembly of FA and Ru complex to the surface of H2N@SiO2, via interaction of Ru….Ru (in the region of g=4 in EPR spectrum), calculating the EPR parameters (Δ/λ) and (V/Δ). So it was accelerated, dramatically the catalytic cycle of FA dehydrogenation. The next catalytic complexes that it was designed were the L1RuL2 and L1FeL2, where L1 phosphine ligand and L2 ligands that contain atoms of Ν and Ο. The best results were obtained (500% higher TONs in comparison with complexes that contained only L1 ligand) in the case of L1 = PP3 and L2= Schiff base that it was named Lγ. Continuous FA feed experiments for PP3RuLγ and PP3FeLγ in combination with the NH2@SiO2 nanoparticles had a ΤΟΝs value of 17367 and 29372, correspondingly. The higher hydrogen yield of L2 ligand it was as a result of electronegative atoms of N and Ο. It is deserve to mention that in both two cases of metals the L2 ligand contribute to the decrease of activation energy Εα by a factor of 50%, revealing the existence of a common thermodynamic base. Knowing that the rate limiting step for FA dehydrogenation is the β-hydride elimination, and proving that in both two cases of metals the Εα decrease by a same factor, we can assume that coligand contribute to be obtained a lower energy barrier in this point of FA dehydrogenation cycleΙΙ. Nanoparticle photocatalytic systems, included semiconductors of Μ0-ΤiO2 type (Μ0=Pt, Pd, Au, Ag), they were prepared via Flame Spray Pyrolysis (FSP) technology. Those were examined for the decomposition of Η2Ο/methanol mixture and they were very effective, succeeding high H2 yields. The better catalyst was in the case of 5%Pt-TiO2 sample, as a consequence of smaller particles’ size, while the higher noble metal loading, the smaller size of naporaticles TiO2. EPR spectroscopy revealed that the biggest percentage of photogenarated holes and electrons (especially surface electrons) was in the case of Pt-TiO2 samples that they were prepared with Double Nozzle FSP. Moreover, the hydrogen evolution mechanism was in close inspection with EFermi that electrons should overlap in order to be in noble metal’s surface. The last catalytic system that it was studied was the CdS/Pt-N-TiO2 and CdS/Pt-N,FTiO2 nanocatalysts and evaluated for their photocatalytic H2/O2 production via overall water splitting, with no extrernal electron or hole acceptors. The 0.5CdS/Pt-N-TiO2 material achieved the best catalytic performance with a photocatlytic production of 639 μmol/g/h of H2 in tandem with 319 μmol/g/h of O2. The photocatalytic H2/O2 production data show that N-incorporation in the TiO2 lattice boosts overall water splitting, while F-incorporation inhibits the catalytic performance. Quantitative monitoring of the photogenerated Ti3+-surface and Ti3+-lattice electrons, as well as of the photogenerated holes (h+) by Electron Parmagnetic Resonce spectrsocopy show that CdS/Pt-N-TiO2 achieves enhanced e-/h+ photogeneration due to interband states generated by N-dopping, facilitating the flow of electrons via Pt to the valence band of CdS. The leaching of Cd2+ ions’ due to photocorrosion of the CdS quantum dots, was montiored in-situ using Anodic StrippingVoltammtery (ASV). The Cd2+ leaching data reveal a severe inhibition of CdS photocorrosion of N-dopped catalysts, CdS/Pt-N-TiO2. This revals a dual beneficial role of N-atoms [i] boosting the visible light photoactivity and [ii] inhibiting CdS photocorrosion. A consistent Z-scheme reaction mechanism is proposed for the catalytic H2 production by CdS/Pt-N-TiO2 and CdS/Pt-N-F-TiO2 heterojunctions, taking into account the photoinduced e-/h+ dynamics as well as the interfacial {CdS} /{Pt-N/F-TiO2} chemistry.
Degree
thesis:*- Grantor dc:publisher
- University of Ioannina
- Year dc:date
- 2019
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Solakidou, Maria
- Σολακίδου, Μαρία
Subjects
dc:subject × 12Rights
dc:rights- Statement dc:rights
-
- BY_NC_ND
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/46859