Back to search

National Technical University of Athens (NTUA)

Transient response of a large two-stroke marine diesel engine coupled to a selective catalytic reduction exhaust aftertreatment system

Abstract

dc:description

Large two-stroke marine diesel engines are used as the prime mover in the majority of ocean going commercial vessels. With a view of reducing the environmental footprint of the marine sector, the International Maritime Organization has enacted regulations which set strict limits on the emitted NOx emissions from marine engines, also known as IMO Tier III. Selective Catalytic Reduction (SCR) is an exhaust aftertreatment technology which allows compliance with the new emission standards. Due to the need of high exhaust gas temperatures for proper SCR operation, in marine two-stroke applications the SCR system is placed upstream of the turbine, i.e. between the engine and the turbocharger. This disrupts the coupling between the engine and the turbocharger introducing challenges on the transient operation of the engine. Due to the large thermal inertia of the SCR system, the turbocharger responds to an engine load change with a significant time delay, which in low load engine operation might lead to thermal instability of the system. Researchers underlined the system’s susceptibility to thermal instability and proposed complicated solutions to ensure the system’s robust operation, such as Variable Turbine Geometry.This thesis investigates the transient response of a large two-stroke marine diesel engine, without turbocharging variability, coupled to a SCR exhaust aftertreatment system. The objective of the thesis is to investigate the effect of the high pressure SCR system on the transient response of the engine with focus on low load operation. Due to the high cost involved in large engine testing the investigation was carried out via modelling and simulation. Zero dimensional models were developed for the propulsion engine and the SCR system. The engine was modelled in the NTUA in-house engine process simulation code and validated against available steady state measurements from the engine’s shop trials. Moreover, a SCR model was developed to take into account the temperature dynamics of the SCR system and was integrated with the engine model. The SCR model was validated against available measured data from a full scale engine-SCR testbed. In transient loading conditions, the load that the engine has to overcome, i.e. the propeller load, is not known a priori, but is dependent on the complex interactions between the engine, propeller and the ship’s hull. In order to obtain an accurate prediction of the engine load during load transients, models for the propeller and the ship’s hull were also developed and integrated with the engine and SCR models. The coupled model of the propulsion system was validated under transient loading conditions using available on-board measured data from a commercial vessel.Simulations of the propulsion system under transient loading were carried out under both calm and heavy weather conditions. Results showed that the transient response of the engine is indeed affected by the presence of the SCR system and the effect is more pronounced at the lower engine load region. However, thermal instability of the system can be averted and the system is able to operate even during very low load operation.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2019

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Foteinos, Michael
  • Φωτεινός, Μιχαήλ

Subjects

dc:subject × 14

Rights

dc:rights
Statement dc:rights
  • BY
Language dc:language
eng

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/47037

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Foteinos, Michael; Φωτεινός, Μιχαήλ. Transient response of a large two-stroke marine diesel engine coupled to a selective catalytic reduction exhaust aftertreatment system. National Technical University of Athens (NTUA), 2019. http://hdl.handle.net/10442/hedi/47037