Back to search

National Technical University of Athens (NTUA)

Επίδραση πρόσθετων σύνθετων αναστολέων διάβρωσης στην ανθεκτικότητα του οπλισμένου σκυροδέματος

Abstract

dc:description

The object of this thesis is the experimental study of the protection of steel reinforcement and the increase of mechanical properties of concrete with the use of organic coatings and corrosion inhibitors. The thesis consists of two parts. The first part examined the use of an organic coating containing corrosion inhibitors, which can be used both on the reinforcement surface and the mortar surface, and evaluated the protection it can offer from corrosion in the environment of chlorides. In the second part, the use of calcium nitrate as corrosion inhibitor (either as an admixture or as a spray) was examined in chloride environment and the protection rate was evaluated to two other commercial corrosion inhibitors. The experimental process of first part consisted in the construction of reinforced cylindrical cement specimens and reinforced cubic cement specimens. The protection study was applied to two different types of specimens, which included reinforced concrete specimens. Αn organic coating was applied either on the surface of the mortar or on the surface of the reinforcement or on the surface of the mortar and on the surface of the reinforcement. For comparison purposes, the corrosion of steels in non-organic painted specimens was studied. The experimental process was carried out in accelerated corrosion conditions (salting chamber), under controlled conditions in a laboratory environment (partial immersion) and in an urban environment (in the Zografou Polytechnic School). The assessment of the protective capability of the organic coating was evaluated by the following methods: - Measurement of electrochemical corrosion parameters (icorr, Rp) and corrosion potential (Ecorr) of reinforcements as a function of exposure time to the corrosive environment, - Calculation of percentage loss of mass and electrochemical mass loss of reinforcements. In the second part were made specimens with a ratio of cement: sand: water 1: 3: 0.5 and with a ratio of cement: sand: water 1: 3: 0.65. In one group of specimens, the corrosion inhibitor Ca(NO3)2 was added in two different ratios (0.4g / 100g of cement and 0.8g / 100g of cement of the amount of water added), while in the other groups of reinforced concrete specimens four different types of corrosion inhibitors have been added to the outer surface of the mortar, two of which are based on calcium nitrate and the other two on dimethylethanolamine and calcium nitrite. The experimental procedure was performed under controlled conditions in a laboratory environment (partial immersion in 3.5 wt% NaCl). The protective capability of the above protection methods compared to unprotected steel was evaluated electrochemically by the determination of electrochemical corrosion parameters. In particular, it was determined: - Corrosion potential versus time - The density of the erosion current icorr- Linear polarization resistance Rp - Electrochemical mass lossIn addition, a mass determination of the mass loss of concrete reinforcement steel was made. Finally, macroscopic and microscopic observation of corroded cement mortars was carried out using a scanning electron microscope (SEM). From this thesis resulted in the following conclusions: 1. The organic coating that contains corrosion inhibitor in all the cases gives protection to the reinforcement and the system by applying the organic coating with the corrosion inhibitor (i and ii coating) both on the surface of the mortar and on the surface of the reinforcement provided better protection in relation to the other two systems (application of the organic coating (i and ii coating) only on the surface of the mortar, or only on the surface of the reinforcement. 2. The inhibitors that were used as admixtures in cement/sand/water: 1/3/0.5 specimens had a better protective effect than the inhibitors that were used as sprays, while in cement/sand/water: 1/ 3/ 0.65 specimens better protective effect had the inhibitors used as Sprays of Groups III and IV in which corrosion inhibitor was based on dimethylethanolamine and calcium nitrite respectively. 3. In all the cases inhibitor that was based on calcium nitrate provide protection either it was used as admixture either as a spray.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2020

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Voulgari, Evgenia
  • Βούλγαρη, Ευγενία

Subjects

dc:subject × 10

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/47050

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Voulgari, Evgenia; Βούλγαρη, Ευγενία. Επίδραση πρόσθετων σύνθετων αναστολέων διάβρωσης στην ανθεκτικότητα του οπλισμένου σκυροδέματος. National Technical University of Athens (NTUA), 2020. http://hdl.handle.net/10442/hedi/47050