Back to search

National Technical University of Athens (NTUA)

Elastic and inelastic behaviour of rocking members of earthquake resilient structures

Abstract

dc:description

This dissertation presents the formulation of finite element algorithms for the prediction of the response of elastic and inelastic rocking members under static and dynamic loading. Apart from deformability along their height, the proposed formulations take the deformability of rocking members near their base into account, which is crucial for an accurate prediction of the response of rocking members under large axial forces, such as the ones used in earthquake resilient structural systems. Due to the partial loading of the rocking interface of such members, solutions regarding the semi-infinite strip from the theory of elasticity instead of the technical theory of bending are employed, since the latter cannot predict the nonlinear load distribution across the rocking interface and, as a consequence, the nonlinear stress distribution near the contact area, which is crucial for the determination of the response of deformable rocking members. The elastic rocking member formulation is presented first, which is based on a force beam-column finite element formulation, where additional member end displacements are considered due to the partial loading of the rocking interface. This formulation is afterwards extended to include nonlinear material behaviour under monotonic loading. The nonlinear displacement distribution of the semi-infinite strip under a concentrated load at an arbitrary position across its end is examined next, for which analytical expressions are proposed. These analytical expressions are then incorporated into a macroelement formulation for cyclic response, which is based on the determination of a suitable stress distribution across the rocking interface so that the produced displacements match the target ones of the rocking surface. Finally, modifications of the previous formulation to extend its use to dynamic analyses by accounting for damping and other motion modes, namely sliding and upthrow, are presented. The aforementioned formulations can be easily implemented in any finite element framework, such as OpenSees, and yield very fast analyses compared to conventional two-dimensional finite element codes. Comparison of the results produced by the macroelement with results from commercial finite element software and experiments show the generally very good accuracy of the produced results.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2020

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Avgenakis, Evangelos
  • Αυγενάκης, Ευάγγελος

Subjects

dc:subject × 20

Rights

Language dc:language
eng

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/47175

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Avgenakis, Evangelos; Αυγενάκης, Ευάγγελος. Elastic and inelastic behaviour of rocking members of earthquake resilient structures. National Technical University of Athens (NTUA), 2020. http://hdl.handle.net/10442/hedi/47175