Back to search

Aristotle University Of Thessaloniki (AUTH)

Προσομοίωση της δημιουργίας και ροής αποβλίττων κατά το φραιζάρισμα με κύλιση οδοντώσεων με χρησιμοποίηση της μεθόδου των πεπερασμένων στοιχείων

Abstract

dc:description

presented. The mathematical description of this manufacturing method is based on the calculation ofpenetrations between the cutting teeth and the gear gap, a solid modeling process and finally animplementation into a coupled thermo-mechanical rigid-viscoplastic FEM code. Gear hobbing of spurgears and the four possible variations for manufacturing helical gears are investigated in detail. Acomparison of the calculated chips with the cut ones was conducted and revealed a sufficient similarity.The developed integrated computational procedure for simulating the gear hobbing process consists ofthree calculation stages:1. The gear hobbing kinematics simulation implemented in MATLAB high-level matrix array language,2. A 3D “solid modeling” construction of the hob and the workpiece for developing geometry for finiteelement analysis, and3. A finite element thermo-mechanical analysis of the tool-gear penetrations based on the rigid viscoplasticformulation for the simulation of chip formation and flow.The developed FEM model capabilities have been demonstrated in terms of chip flow and morphologyin cutting of spur gears as well as in the four possible cutting variations of helical gears. An insight ofthe complex chip formation mechanism is provided, enabling the clarification of phenomena like thechip flow obstruction and the chip collision with gear flanks in individual generating positions during themanufacturing of a gap. Moreover, the FEM calculations provide an effective tool for predictingoccurring temperatures, strain and stresses and thus for approaching the real loads of the cutting teethduring gear hobbing.

Degree

thesis:*
Grantor dc:publisher
Aristotle University Of Thessaloniki (AUTH)
Year dc:date
2008

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Friderikos, Orestis
  • Φρειδερίκος, Ορέστης

Subjects

dc:subject × 12

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/47270

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Friderikos, Orestis; Φρειδερίκος, Ορέστης. Προσομοίωση της δημιουργίας και ροής αποβλίττων κατά το φραιζάρισμα με κύλιση οδοντώσεων με χρησιμοποίηση της μεθόδου των πεπερασμένων στοιχείων. Aristotle University Of Thessaloniki (AUTH), 2008. http://hdl.handle.net/10442/hedi/47270