University of Thessaly (UTH)
Συγκριτική ανάλυση αυτοματοποιημένων συστημάτων άρδευσης
Abstract
dc:descriptionThis dissertation is structured in two main axes, each of which refers to one of the most important problems of the global scientific community in the last decade. The first of these, refers to the ever-increasing energy issue that our planet is facing today. The second, relates to the saving of irrigation water, as agriculture is the world's largest consumer of water. Therefore, a small percentage of water savings from it, achieves large quantities for other competitive water uses. The rapidly growing energy needs that is observed nowadays worldwide, makes it necessary to search for new energy sources. The natural resources which the world's population is currently relying for energy supply are mainly non-renewable, with the most widely used fossil fuels. As a result, due to their continued use, we are faced with the serious risk of their depletion and at the same time the creation and exacerbation of serious environmental problems such as acid rain and greenhouse effect. The emerging solution to the problem is the use of alternative forms of energy, namely Renewable Energy Sources, which are inexhaustible and environmentally friendly. These include energy crops which can produce different types of biomass as main products, which can be used for various energy purposes such as the production of solid, liquid and gaseous biofuels. Water has always been one of the most important economic and social development factors in every country and today, a crucial natural resource, with limited availability. The agricultural sector is the main consumer of water, accounting for around 80% of the total amount of water used worldwide, while in Greece the corresponding share is around 87.5%. In general today, the current status in the irrigation sector has the effect of wasting water. This makes it imperative to take action to address this problem, such as precisely identifying the water needs of crops, using more efficient water irrigation methods and cultivating plants tolerant to possible water scarcity. The drip irrigation (surface and underground) is one of the modern methods of irrigation, which achieves greater efficiency in the application of irrigation water. The underground drip irrigation system is a variation of the widely applied surface drip irrigation system in which drip piping is placed under the surface of the soil. In addition, drip irrigation is a method that offers the possibility of combining with automation. In this context, the subject of this thesis was: (a) to estimate the growth and productivity of sunflower as energy crops for the production of biodiesel, under the different methods of irrigation planning in Thessaly; (b) to evaluate the cultivation of the sunflower, energy crop, under low-input farming conditions (c) the influence of different irrigation programming methods on the production of biomass from sunflower; (d) a comparison of the irrigation programming methods in terms of savings (e) the study and comparison of different partially or fully automated irrigation programming methods, the maximization of the energy benefit from the cultivation of the sunflower energy plant and the saving of irrigation water. The survey was carried out on an experimental crop field in the Farm of the University of Thessaly, in the area of Velestino of Magnesia during the farming periods of 2011 (pilot application), 2012, 2013 and 2014. The experimental plan that was implemented was six complete treatment groups in four replicates. The treatments applied were: (a) surface drip irrigation, in which irrigation planning was carried out using the evaporation pan method (A.E.), (2) surface drip irrigation, in which irrigation planning was carried out using the Penman-Monteith method (P. - M.), (3) surface drip irrigation, in which the irrigation programming was based on the 10HS soil moisture sensor (SMS), (4) the surface drip irrigation, in which irrigation programming was based on the measuring sensor water potential resources Watermark (W.M.), and (5) the surface (AUTO (E)) and (6) the underground (AUTO (Y)) drip irrigation, in which the irrigation scheduling based on automatic evaporation pan. The irrigation dose applied to all treatments was equal to 100% of the water crop needs. The underground application pipes were placed 45 cm below the ground surface, with special sub-surface machinery, spaced between 160 cm and 20 mm in diameter, made of polyethylene. The dispensers were 2.3 l / h, and were self-cleaning and self-regulating. In the present thesis irrigation programming was based both on methods of calculating the reference evaporation and in soil moisture and water potential measurement systems. In particular, the calculation of the reference evaporation (ET0) and irrigation programming was based on the Penman - Monteith method, the treatment P.-M. The calculation of the reference evaporation (ET0) and the calculation of the irrigation dose for treatment A.E. was carried out using the type A evaporation. The automatic evaporation system was based on this method and was used for irrigation programming in AUTO (E) and AUTO (Y) operations. In S.M.S. and W.M., irrigation programming was based on the measurement of soil moisture and water potential, respectively. For this reason, the characteristic curve of the soil, in order to determine its hydraulic characteristics, such as the permanent wetting point and its water-ductility, was extracted in laboratory. Due to high values, we conclude that the soil of the experimental crop field was particularly heavy. The irrigation of four of the six treatments was performed every two days, while in S.M.S. and W.M. were determined by the rate of depletion of soil moisture. Also, in all treatments, surface drip irrigation was applied except for AUTO (Y) to which the underground drip irrigation method was applied. From the comparative study of the six above-mentioned irrigation programming methods, the results of the treatments using the automatic evaporation were satisfactory. The parameters taken into account to draw this conclusion were: (a) the achievement of the maximum possible output of the final product (seed), at the same time with the maximum possible saving of irrigation water, (b) keeping the cost in reasonable limits and (c) establishing a simple method for use by the producer or producer group.
Degree
thesis:*- Grantor dc:publisher
- University of Thessaly (UTH)
- Year dc:date
- 2017
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Karatasiou, Eirini
- Καρατάσιου, Ειρήνη
Subjects
dc:subject × 14- Αρδεύσεις
- Συστήματα άρδευσης
- Μέθοδοι άρδευσης
- Ενεργειακά φυτά
- Αισθητήρες εδαφικής υγρασίας
- Irrigations
- Irrigation systems
- Irrigation methods
- Energy plants
- Soil moisture sensors calibration
- Άλλες Γεωπονικές Επιστήμες
- Γεωπονικές Επιστήμες και Κτηνιατρική
- Other Agricultural Sciences
- Agricultural and Veterinary Sciences
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/47279