National Technical University of Athens (NTUA)
Ανάπτυξη ολοκληρωμένων κυκλωμάτων και οπτικών διεπαφών πλατφόρμας SOI για εφαρμογές σε οπτικά δίκτυα επικοινωνιών
Abstract
dc:descriptionThe first main purpose of this thesis is the development of integrated photonic devices for their adoption in next generation optical communications networks. The adoption of these devices will allow broad and in-depth electro-optical integration, enabling ultra-high-speed, and low-power consumption optical interconnection for use in both telecom and datacom networks. These elements will be widely adopted as basic circuits in all-optical switching circuits for use in optical nodes, allowing the implementation of elastic optical network topologies. The second purpose of this thesis is the development of high-performance optical interfaces for silicon photonics platform, that will be tolerant in misalignments induced during fabrication and assembly process. The first major issue studied in this thesis was the design of filter elements fabricated on silicon photonics integration platform, targeting their adoption in elastic optical network topologies. A thermo-optically controlled element consisting of a two serially coupled ring resonator cavities with variable coupling ratio, achieved by utilizing MZI structures, was developed and exhibited adaptive bandwidth and variable wavelength tuning operation. An upgraded version of this element was designed, utilizing air trenches to enhance its spectral characteristics, via more efficient thermal insulation between the waveguides. Experimental evaluation of the proposed devices demonstrated their excellent behavior as variable optical filters. The second major issue studied, was the design of optical interface between silicon photonics to polymer waveguides, and fiber optics. Optical interfacing was based on the design of a silicon waveguide taper, by following the constant loss per unit length criterion. The adiabatic optical coupler is characterized by low coupling loss, high operation bandwidth, and sufficient tolerance to imperfections induced during fabrication and assembly processes. Finally, the third major issue studied was the design of a 3D optical coupler for optical interfacing of silicon waveguides with waveguides inscripted in glass integration platform using passive alignment techniques, and operating in both polarization states. Design is based on the silicon waveguide taper width profile extraction, enabling optical power transfer from silicon to angled glass waveguide, based on the principle of constant loss per unit length. Simulation studιes revealed high power coupling performance, while the overall circuit was characterized by broadband and high tolerance operation.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2020
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Poulopoulos, Ioannis
- Πουλόπουλος, Ιωάννης
Subjects
dc:subject × 12- Κυματοδηγοί
- Πλατφόρμα ολοκλήρωσης πυριτίου
- Οπτικές διεπαφές
- Οπτικές διασυνδέσεις
- Silicon
- Silicon waveguides
- Optical interfaces
- Optical interconnects
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Ηλεκτρολόγου Μηχανικού, Ηλεκτρονικού Μηχανικού, Μηχανικού Η/Υ
- Engineering and Technology
- Electrical Engineering, Electronic Engineering, Information Engineering
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/47375