Back to search

National Technical University of Athens (NTUA)

Μελέτη και μοντελοποίηση εκπεμπόμενης ηλεκτρομαγνητικής ακτινοβολίας ζεύξης SpaceWire για διαστημικές εφαρμογές

Abstract

dc:description

The subject of the thesis is the study and modelling of electromagnetic radiated emissions of a communication and data transfer link based on SpaceWire standard used in units and systems for space applications. In the thesis, this standard is briefly presented and discussed with main focus on the levels that dominate the radiated emissions. Next, radiated emissions as well as the signal spectrum on the cable measurements are presented and the effect of the link speed and the code word length on the spectral emissions of a half-duplex SpaceWire/LVDS link is considered. Finally, a methodology is proposed to model the electromagnetic radiated emissions of shielded cables taking into account the dielectric characteristics of the ground plane. Chapter 1 presents the European standard ECSS-E-ST-50-12C as published on January 24 2003 (initially with the name ECSS-E-ST-50-12Α and renamed later on July 31 2008 in accordance with ECSS standards) and provides the details for the SpaceWire protocol. In this chapter, the physical level, the signal level and the character level are discussed along with various grounding and bonding techniques. Moreover, a brief introduction is made to the revised edition ECSS-E-ST-50-12C Rev.1 published on May 15 2019, which brings the standard up to date. In Chapter 2 the radiated emissions as well as the signal spectrum on the cable measurements are presented and the effect of the link speed and code word length on the spectral emissions of a half-duplex SpaceWire/LVDS link is studied. The link was implemented with a SpaceWire cable and the one end of the link composed by a pulse signal generator whose output is converted to LVDS signal with the aid of a PCB circuit and the other end terminated. In Chapter 3, a methodology is proposed to model the electromagnetic radiated emissions of shielded cables taking into account the dielectric characteristics of the ground plane as well as various setups of the cable with regards to the relative height of the cable to the ground plane. Measurement data are used to extract valuable model parameters in order to accurately predict the radiated emissions for various implementations with In Chapter 4, the proposed methodology for modeling the electromagnetic radiated emissions is applied to the case of a SpaceWire/ LVDS link above a Carbon Fiber Reinforced Polymer (CFRP) ground plane. This This setup is of major interest for Space applications, as it becomes the standard harness and grounding design for the majority of space missions. Moreover, the results provided verify the methodology and strongly support its applicability in complex systems. In Chapter 5, a modified approach is presented, taking into account the pulse excitation of the simulated SpaceWire / LVDS system. Due to the differential pulse signaling and the skew phenomenon, a pulsed representation of the current is proposed to solve the inverse problem, which is implemented with the help of the differential evolution algorithm (Differential Evolution – DE). In Chapter 6, the measurement results of an actual full-duplex SpaceWire link, implemented with the iSAFT SpaceWire Simulator of TELETEL S.A., are presented. This unit implements all levels of the link, in contrast to the implementation of the printed circuit boards utilized in the previous chapters, and offers the full functionality of SpaceWire devices. Measurements were obtained for various payload lengths of the packets and various data rates of the SpaceWire link. Finally, a model capable of describing the behavior of the system with satisfactory accuracy is extracted, based on the methodology presented in the previous chapters. Finally, Chapter 7 discusses briefly the next steps of future work in this research field.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2020

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Baklezos, Anargyros
  • Μπακλέζος, Ανάργυρος

Subjects

dc:subject × 18

Rights

dc:rights
Statement dc:rights
  • BY_NC_ND
Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/47670

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Baklezos, Anargyros; Μπακλέζος, Ανάργυρος. Μελέτη και μοντελοποίηση εκπεμπόμενης ηλεκτρομαγνητικής ακτινοβολίας ζεύξης SpaceWire για διαστημικές εφαρμογές. National Technical University of Athens (NTUA), 2020. http://hdl.handle.net/10442/hedi/47670