Aristotle University Of Thessaloniki (AUTH)
Effect of graphene nanoplatelets on the physicochemical properties of high-density polyethylene nanocomposites
Abstract
dc:descriptionRecently, there has been a growing interest in nanocomposites applied in thermally conductive polymeric materials. Polymers that are highly conductive and electrochemically active have been focused on some promising applications such as solar cells, sensors, energy storage devices, and pipes. Polyethylene (PE) is a low-cost semi-crystalline polymer that shows good thermal and mechanical properties and high chemical resistance. Therefore, it can be used effectively in various applications such as automotive, films, cable jacketing, bottles, tubes, and pipes. In certain areas, PE use is limited by its own mechanical and gas barrier properties, poor heat resistance, and low thermal and electrical conductivities, among others. Carbon-based nanomaterials, such as graphene oxide (GO) and graphene nanoplatelets (GNPs), have been proposed as the next generation multifunctional nanofiller for the improvement in matrices because of their high mechanical, thermal, and gas barrier properties. GO is an oxidized graphene derivative, which can be widely used as an alternative or precursor for graphene materials due to its high dispersibility, processability in an aqueous environment, low cost, and widespread ability to convert to graphene. It is produced from graphite flakes by the thermal oxidation method invented by Hummer’s and modified by successors. GNPs are small stacks of multiple graphene sheets, typically derived from bulk graphite compounds. GNPs were proposed as a lower-cost alternative compared to carbon nanotubes and single-layer graphene, offering conductivity at a very low filler content, strengthening, and toughening that cannot be achieved using carbon black. The first objective of this thesis is to synthesize GO from graphite by using the modified Hummer’s method. Characterization of GO was studied by using XRD, XPS, FTIR, UV-Vis spectroscopy, RAMAN, TGA, SEM, and TEM. The second objective of this thesis is to prepare HDPE/GNPs nanocomposites filled with different diameter sizes (5, 15, and 25 μm) of GNPs at various amounts (0.5-5 wt.%) by the melt-mixing method. The effect of diameter size and filler content on morphological, structural, thermal, and mechanical properties is reported. This thesis aims to measure, understand, model, and predict the influence of realistic processing conditions on the thermal and mechanical properties of the HDPE matrix. For this reason, several advanced experimental techniques were employed.Α detailed structural and morphological study of GNPs into the HDPE matrix (ex. crystallinity, interaction, dispersion) was performed by using X-ray Diffraction (XRD), Raman spectroscopy, X-ray Photoelectron Spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR), Transmission Electron Microscopy (TEM), Scanning Electron Microscopy (SEM), and Polarized Light Microscopy (PLM). To achieve a better comprehensiveness of the structure of the HDPE/GNPs nanocomposites, the relative crystallinity was calculated by using the above-mentioned techniques (XRD, FTIR, Raman, and DSC). Crystallization and melting of HDPE/GNPs nanocomposites in non-isothermal conditions were studied at several cooling rates by using conventional differential scanning calorimetry (DSC) and Fast Scanning Calorimetry (FSC). The primary and secondary crystallization kinetics of HDPE was characterized as a function of cooling rate. The approach to describe primary crystallization is based on temperature-dependent nucleation and growth of spherulites governed by an Avrami-type equation. An isoconversional technique was used to evaluate the apparent activation energy of the nanocomposites during the crystallization process far from thermodynamic equilibrium. The FSC has been completed by in-depth Temperate Modulated DSC analysis (TM-DSC) of the multiple melting peaks appeared. The effect of GNPs diameter on the thermal stability and kinetics mechanism of the HDPE matrix was studied by Thermogravimetric Analysis (TGA). An in-depth analysis of the thermal degradation kinetics of all the prepared HDPE/GNPs was carried out. To calculate the activation energies, Isoconversional, and model-fitting procedures were followed. Py-GC/MS was employed on the HDPE/GNPs nanocomposites to understand the decomposition mechanism in depth, detect each one of the fragments coming from each macromolecule and correlate the collected data with the decomposition mechanism. The influence of GNPs with different diameters on the thermal conductivity was systematically investigated at different concentrations values. The effectiveness of the selected micromechanical models on predicting the thermal conductivity of nanocomposites was examined, too. A comprehensive analysis of GNPs size in the thermomechanical properties of the HDPE nanocomposites such as storage/loss modulus and viscosity were explored. The mechanical properties of HDPE/GNPs nanocomposites were characterized by tensile tests. Various micromechanical models were tested and compared with experimental results, considering the dispersed and agglomerated GNPs in the HDPE matrix and the effect of the percolation threshold. Finally, SEM was used to observe the fracture surfaces of the composites after tensile tests.
Degree
thesis:*- Grantor dc:publisher
- Aristotle University Of Thessaloniki (AUTH)
- Year dc:date
- 2020
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Tarani, Evangellia
- Ταράνη, Ευαγγελία
Subjects
dc:subject × 24- Πολυαιθυλένιο
- Νανοφυλλίδια γραφενίου
- Σύνθετα
- Τήξη
- Μη ισόθερμη κρυστάλλωση
- Κινητική
- Αποικοδόμηση
- Μηχανικές ιδιότητες
- Μοντελοποίηση
- Φρακτογραφία
- HDPE
- GNPs
- Composites
- Melting
- Non-isothermal crystallization
- Kinetics
- Degradation
- Mechanical properties
- Modeling
- Fractography
- Επιστήμες Μηχανικού και Τεχνολογία
- Νανοτεχνολογία
- Engineering and Technology
- Nano-Technology
Rights
- Language dc:language
- eng
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/47866