University of Patras
Σύνθετα νανοδιηλεκτρικά πολυμερικής μήτρας μαγνητικών εγκλεισμάτων: ανάπτυξη, χαρακτηρισμός και λειτουργικότητα
Abstract
dc:descriptionIn the present doctoral thesis, series of composite nanodielectrics were developed by employing an epoxy resin acting as matrix and magnetic nanoparticles of different crystal structure and magnetic behaviour, namely ZnFe2O4, Fe12O19, Y3Fe5O12, BaFe12O19, SrFe12O19, as reinforcing phase. In all four series of nanocomposites filler type and content were varying parameters. The successful incorporation of the nanoparticles into the polymer matrix was confirmed by the structural characterization of the specimens via X-ray diffraction (XRD) spectra. The diffraction spectra of the barium ferrite systems revealed the coexistence of Fe2O3 within both the BaFe12O19 nanoparticles and its respective nanocomposites, which is probably a residue of the fabrication method of the ceramic nanopowder. The morphological characterization via Scanning Electron Microscopy (SEM), demonstrated the high quality of the fabricated nanocomposites. Fine nanodispersions of the ceramic particles in the polymer matrix were achieved and extensive agglomerations have been avoided. The thermal stability of the nanocomposites was studied using Thermogravimetric Analysis (TGA). All systems exhibit two stages of weight loss. In all cases, the first degradation mechanism shifts to higher temperatures with increasing filler content, indicating enhanced thermal stability of the systems. Differential Scanning Calorimetry (DSC) thermographs revealed an endothermic step-like transition of all systems, attributed to the glass to rubber transition of the polymer matrix. The variation of the glass to rubber transition temperature provide indications for the interactions occurring inside the nanocomposites. The nanocomposites filled with Fe3O4 exhibit the highest Tg values of all systems indicating good adhesion between the filler and the polymer matrix. The mechanical investigation was conducted via Dynamic Mechanical Analysis (DMA) (in three-point bending configuration) and static tensile tests. The incorporation of the ceramic nanoparticles enhances significantly both the storage and Young’s modulus. The optimum mechanical behaviour is presented by nanocomposites filled with hard ferrite nanoparticles, especially with SrFe12O19, via the highest values of Storage and Young’s modulus in the whole temperature range of the tests. The dielectric response of the different nanocomposite systems was carried out by means of Broadband Dielectric Spectroscopy (BDS). The analysis of the experimental data was carried out via the dielectric permittivity, electric modulus, and ac conductivity formalisms. The real part of dielectric permittivity increases with rising temperature and filler content, because thermal agitation enhances the alignment of the chain dipoles, and ferrite nanoparticles exhibit higher values of permittivity and conductivity than the polymer matrix. On the contrary, ε’ diminishes rapidly with frequency, because the permanent and induced dipoles do not have the necessary time to align themselves with the externally applied electric eld. AC conductivity increases, with temperature as well as with frequency. The temperature effect is more pronounced in the low frequency range where AC conductivity, at isothermal conditions, tends to receive constant values corresponding to the values of under direct field (DC). After a specific frequency, conductivity values display an exponential dependence on frequency. The values of AC conductivity increase with the incorporation of the ceramic filler into the polymer matrix although the effect of filler content appears to be limited, because of its semi-conductive nature. Once more, the nanocomposites filled with ZnFe2O4 achieve the highest AC values, among all systems. Dielectric analysis revealed three distinct relaxation mechanisms in all examined systems. At high temperatures and low frequencies Interfacial Polarization (IP) was recorded, due to the accumulation of free charges at the interface between the matrix and the filler. At intermediate frequencies and temperatures, the glass to rubber transition (-relaxation) of the polymer matrix was observed and finally at high frequencies, the reorientation of small polar side groups of the polymer chain (-relaxation) was present. Relaxation dynamics provided information about the molecular dynamics of the examined systems by calculating the activation energy and Vogel temperature (ΤV) of the respective relaxation. The ability of the fabricated nanocomposite systems to store energy was investigated via the dielectric reinforcing function and DC charge-discharge tests. Experimental data indicate an increase in both stored and harvested energies with the externally applied electric field and filler concentration, due to the high permittivity of the ceramic filler and the induced enhanced heterogeneity of the systems.In order to evaluate the nanocomposites’ performance at the storing/harvesting procedure, the coefficient of energy efficiency (neff) was calculated. Systems with ZnFe2O4 exhibit neff values, ranging from 72 to 76 %, while nanocomposites with 10 and 15 phr Y3Fe2O5 content attain values of 85% and 84%, respectively. The combination of high values of both relative energy and neff indicate that the 15 phr Y3Fe2O5 nanocomposite exhibits the optimum energy efficiency of all systems. The magnetic characterization of the nanocomposites was performed by employing a Superconducting Quantum Interference Device (SQUID) magnetometer. Magnetization of the nanocomposites increases with filler content as a result of the induced magnetic properties into the polymer matrix by the magnetic nanoparticles. The systems filled with Fe3O4 demonstrates a distinctly soft ferrimagnetic behaviour and the nanocomposite systems filled with BaFe12O19 and SrFe12O19 exhibit hard ferrimagnetic behaviour, while systems filled with ZnFe2O4, denote a superparamagnetic state at room temperature. The linear dependence of the magnetic saturation on filler content could be considered as an indication for the fine dispersion of the magnetic nanoparticles in the polymer matrix. Evaluating the optimum magnetic performance is a rather complicated issue and definitely depends on the potential application. The nanocomposites filled with SrFe12O19, and in general hexaferrite content, demonstrate the highest values of coercive field and remanence magnetization, while the systems filled with Fe3O4 nanoparticles exhibit higher values of magnetization and magnetic saturation.ZFC/FC measurements were conducted in order to investigate the low temperature magnetic properties of the nanocomposites. The characteristic temperature ΤB signifying the superparamagnetic state of the systems filled with ZnFe2O4 was calculated from the respective ZFC/FC curves and was found to be 43 Κ. Two magnetic phase transition was recorded at Fe3O4 systems’ spectra, attributed to Verwey transition at ΤV ≈ 90 K and a spin-glass like transition at Tsg ≈ 30 K. Another magnetic transition was identified in the BaFe12O19 systems at approximately 110 K probably associated with the second phase that was detected in the XRD spectra, though its origin cannot be easily interpreted. Finally, an extensive discussion and comparative analysis of the experimental results took place. From the conducted analysis it is evident that the synergy of the occurring physical mechanisms, in the under study systems, and their supplementary properties lead to the development of multi-functional performance. The developed and studied composite nanodielectrics can operate as materials/devices, since are able to execute several functions/operations, such as variable and tunable polarization, controllable dielectric response and conductivity, adjustable mechanical behaviour under dynamic and static load, enhanced thermal stability, tunable magnetic properties and are able to store and retrieve electrical energy. By all these means, they approach the behaviour of a smart materials’ system and constitute a suitable base for their development.
Degree
thesis:*- Grantor dc:publisher
- University of Patras
- Year dc:date
- 2020
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Sanida, Aikaterini
- Σανίδα, Αικατερίνη
Subjects
dc:subject × 28- Νανοδιηλεκτρικά
- Νανοσύνθετα πολυμερή
- Φερρίτες
- Πολυλειτουργικά υλικά
- Θερμομηχανικές ιδιότητες
- Διηλεκτρική απόκριση
- Αποθήκευση και ανάκτηση ενέργειας
- Αγωγιμότητα
- Μαγνητικές ιδιότητες
- Nanodielectrics
- Polymer nanocomposites
- Ferrites
- Multifunctional materials
- Thermomechanical properties
- Dielectric response
- Magnetic properties
- Energy storage and harvesting
- Conductivity
- Φυσικές Επιστήμες
- Άλλες Φυσικές Επιστήμες
- Επιστήμες Μηχανικού και Τεχνολογία
- Μηχανική Υλικών
- Νανοτεχνολογία
- Natural Sciences
- Other Natural Sciences
- Engineering and Technology
- Materials Engineering
- Nano-Technology
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/47938