University of Patras
Out of autoclave manufacturing of CFRPs having multiscale reinforcement for improved interlaminar fracture toughness and multifunctional characteristics
Abstract
dc:descriptionCarbon fiber reinforced polymer (CFRPs) composites are increasingly used as advancedmaterials in many structural applications i.e. aerospace, automotive, marine etc. due totheir superior in-plane mechanical properties, high specific strength and stiffness andcorrosion resistance compared to conventional metals. However, during their service life,these composite materials due to their laminated structure appear poor out-of-planeproperties due to the absence of through-thickness reinforcement. Additionally, their lowpolymer matrix toughness leads to interlaminar failures such as delamination. Delaminations as a primary failure mode are resulted either from fatigue loadings or low velocity impact which are caused by the extension of multiple matrix cracks. Therefore, composites are highly susceptible to impact damage due to brittle matrix behaviour and poor impact damage tolerance. In light of this issue, the introduction of carbon nanoparticles and especially carbon nanotubes into the matrix of composites has shown considerable improvement on the fracture behaviour of the composites by introducing additional energy absorption mechanisms during fracture, thus concluding to composites with improved damage tolerance. Several attempts have been developed for enhancing the fracture toughness and damage tolerance of fibre-reinforced polymers such as stitching particles. Towards this direction, the use of nanoparticles and especially carbon nanotubes (CNTs) into the matrix results in the development of composites with multi-scale reinforcement. CNTs are highly potential fillers due to their extraordinary mechanical,electrical and thermal properties. The nano-phase improves the fracture behaviour of composites by introducing additional energy absorption mechanisms during fracture, thus concluding to composites with improved damage tolerance characteristics. However, adirect introduction of CNTs into matrix (mainly in high CNTs concentrations) leads to increase of resin’s viscosity and an uneven nanofiller distribution and/or filtering effects that block the resin close to the inlet gates. This difficulty makes almost impossible thedirect introduction of CNTs during Out-of-Autoclave (OoA) processes such as liquid resin infusion (LRI) or resin transfer molding (RTM).The present Dissertation aims to the development of Out-of-Autoclave Carbon Fibre Reinforced Polymers (CFRPs) with improved interlaminar fracture toughness and damage tolerance characteristics by the introduction of carbon nanotubes and nano-doped nonwoven interleaf veils on the surface of the main reinforcement (carbon fabrics). More precisely, the deposition of multi-walled carbon nanotubes (MWCNTs) into the structure of CFRPs has been succeeded by using a liquid CNT-enriched sizing agent solution for the pretreatment of main reinforcement prior or after the carbon fabric preform. In addition,the introduction of the copolyamide (Nylon-66, 6/11/12, Griltex 1516A) nonwoven veils enhanced with CNTs (max concentration of 2.5 %wt. MWCNTs) as interleaf materials into the structure of CFRPs was performed as an alternative route of introduction ofcarbon nanotubes between the carbon fabrics).
Degree
thesis:*- Grantor dc:publisher
- University of Patras
- Year dc:date
- 2019
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Dimoka, Polyxeni
- Δημόκα, Πολυξένη
Subjects
dc:subject × 12Rights
dc:rights- Statement dc:rights
-
- BY_NC_SA
- Language dc:language
- eng
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/47950