Back to search

University of Patras

Υπολογιστική ανάλυση μονοφασικής και διφασικής ροής νερού-αέρα σε ακτινικές πτερωτές αντλιών

Abstract

dc:description

The aim of the doctoral dissertation is the computational analysis and investigation of fresh water flows and two-phase water-air mixture flows in single-stage radial flow pump impellers. For the simulations, an industrial pump, an experimental pump and triads of impellers were selected for each of the four ideal pumps in order to study the effects of some of the geometric parameters on the flow field and the performance of the machine. In addition, experimental measurements were performed with: a) three impellers that operate with fresh water in an experimental centrifugal pump test rig of the University of Patras designed, manufactured and equipped with measuring equipment and data collection-processing during the research work and b) an experimental pump of the National Technical University of Athens, in order to evaluate the computational results regarding the performance of the impellers (total head and efficiency vs flow rate) in various rotational speeds. The thesis is structured in seven chapters with an extensive review of the literature provided in the introductory chapter. The second chapter presents the designs of the various impellers that were the subject of the computational simulations and experimental measurements as well as the design of the experimental centrifugal pump test rig. In the third chapter, a brief reference is made to the physicomathematical modeling of flow fields into pumps, when operating with water or with a mixture of water-air and which were used in the computational simulations. The fourth chapter presents and comments on the results of the numerical solutions of the RANS (Reynolds-averaged Navier-Stokes) equations in combination with a two-equation turbulence model (k-ε, RNG k-ε and SST k-ω) for one phase flows in two pumps and twelve radial flow impellers. From the calculated velocity and pressure fields, blades loading and impellers’ performances are determined, which for three cases are compared with experimental measurements. In the fifth chapter, the simulations of the two-phase water-air flows in three impellers in three different flow rates and two gas phase percentages are presented and commented. The simulations of the water-air mixture flows were performed by numerical solution of the RANS equations in combination with the SST k-ω turbulence model and the results regarding the performance of the impellers are compared with experimental measurements provided in the literature. The sixth chapter summarizes the conclusions of the computational simulations and suggests further research issues. The seventh chapter contains the bibliography used in the present thesis. The studies of single-phase flow fields in centrifugal pumps and radial flow impellers were performed with Ansys-Fluent and Ansys-CFX computational fluid dynamics (CFD) commercial software. The results of numerical simulations for the pumps working with fresh water s compared to the conducted measurements show a satisfactory agreement in the region of the best efficiency point. Existing deviations can be attributed to the fact that the measurements referred to the pump as a whole, from the suction to the outlet, and not to a part of it such as the impeller. From the investigations of the influence of the output blade angle of the radial flow impellers, it is concluded that increasing the output blade angle increases on the one hand the total head with a simultaneous tendency the H-Q curve flattening and on the other hand reduces the hydraulic efficiency. For the nominal flow rate, the increase in the manometer is up to 6.2% and the decrease in the hydraulic efficiency is up to 4.5%. Investigations of the geometry of the mean camber line of the blades confirm its effect on the performance of the impellers, but the differences are relatively small and absolutely less than 10% for the total head and 2.5% for the hydraulic efficiency, having as reference the impellers with a linear variation of the angle of inclination of the blades. The latter has the advantage in terms of design simplicity. Having validated the numerical performance predictions with experiments, the variation in the velocity field was studied as it exits the impeller and how it evolves, as each channel forming two successive blades approaches the pump’s tongue and passes it. The studies of two-phase (water-air mixture) flows in the radial flow impellers were performed with Ansys-CFX CFD commercial software. Computational investigations of two-phase water-air mixtures in three radial flow impellers are limited to those cases where the air is in the form of bubbles. Simulations were performed for air percentage of 2% and 5% evenly distributed in the form of undeformable spherical bubbles with a diameter of 0.5mm, at the entrance of the impeller. Two different models for the exerted forces on the bubbles were examined. The interaction between them as with the walls of the impeller is crucial for the formation or not of larger pockets, as well as for the point of their appearance. Different pressure boundary conditions were also applied, with the air being treated as an ideal fluid, taking into account its compression. From the numerical results it can be deduced that in two-phase flows the influence of the curvature of the mean camber line on the performance of the impellers is almost the same as that for single-phase flows while the reduction of the total head and hydraulic efficiency in the nominal flow rate for 2% air in the water-air mixture is about 7.7% and 3.8% respectively when air is considered as real gas and 4.1% and 1.5% respectively when air is considered as ideal gas. For a 5% air in the wa-ter-air mixture, the reductions in total head and hydraulic efficiency in the nominal flow rate amount to 14% and 6.4% respectively when the air is considered as real gas and 8.9% and 3.4% respectively when the air is considered as ideal gas.

Degree

thesis:*
Grantor dc:publisher
University of Patras
Year dc:date
2020

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Mentzos, Michail
  • Μέντζος, Μιχαήλ

Subjects

dc:subject × 10

Rights

dc:rights
Statement dc:rights
  • BY
Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/47959

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Mentzos, Michail; Μέντζος, Μιχαήλ. Υπολογιστική ανάλυση μονοφασικής και διφασικής ροής νερού-αέρα σε ακτινικές πτερωτές αντλιών. University of Patras, 2020. http://hdl.handle.net/10442/hedi/47959