Aristotle University Of Thessaloniki (AUTH)
Μελέτη της επίδρασης νανοσωματιδίων στη γήρανση του πολυαιθυλενίου
Abstract
dc:descriptionHDPE is valuable for its numerous indoor and outdoor applications. Considering that Earth is surrounded by an oxygen rich atmosphere and taking into account most polyolefins are considerably sensitive to UV irradiation when oxygen is present, due to impurities in their structure, significant problems may occur. To extend the life of food and also to prevent it from microbial deterioration, antimicrobial additives are usually added on HDPE. Copper ions and Ag nanoparticles are well known for their antimicrobial properties and are used extensively in many applications. However, till today, there is no available study on how these nanoparticles affect the stability of HDPE, especially against sunlight. So, the aim of the current thesis is to evaluate the effect of Copper nanofibers and nanoAg nanoparticles on HDPE’s UV stability. HDPE nanocomposites containing different amounts of copper nanofibers were prepared by melt mixing on a Haake-Buchler Reomixer. From SEM micrographs it was found that there is a fine dispersion of nanofibers into HDPE matrix. Tensile strength at break was unaffected from the addition of nanoparticles and only Young’s modulus was enhanced. All nanocomposites in the form of thin films were exposed to UV irradiation at 280 nm for several days. As it was verified from FTIR measurements the mechanism of photo-oxidation consists of macromolecular chain scission, formation of compounds with unsaturated, hydroxyl and carbonyl end groups as well. Also, from FTIR spectroscopy and variation of mechanical properties it was concluded that the addition of Cu-nanofibers enhances the UV stability of HDPE. From acoustic microscopy it was verified that the UV degradation is an oxygen diffusion process and the addition of Cu-nanofibers delays its progress. HDPE nanocomposites containing different concentrations of silver (Ag) nanoparticles (0.5%, 1.0%, 2.0%, 3.0%, and 5.0 wt%) were prepared by melt mixing on a Haake-Buchler Reomixer. Nanocomposites in the form of thin films were exposed to UV irradiation at 280 nm at constant temperature (25°C) and relative humidity (50%) for several hours. The samples were characterized for their photochemical stability with several methods. From FTIR spectroscopy it was found that new chemical compounds were formed during UV exposure containing carbonyl, vinyl, and hydroxyl/hydroxyperoxide groups. According to the spectra, the nanoparticles act as inhibitors to the photo-oxidation mechanism of the polymer matrix. Moreover, as the loading of nanoparticles increased, better protection was achieved. Further study of the samples was performed using tensile strength tests, showing that neat HDPE was affected significantly by UV irradiation, while its nanocomposites with Ag were affected in a lower extend. The greater the loading of the nanoparticles in the polymer matrix, the more they reduce the mobility of the molecules, thus inhibiting the chain scission of HDPE. Degree of crystallinity was also affected from UV exposure time and the addition of nanoparticles. Finally, the mechanism of thermal degradation of HDPE and its nanocomposite with 1.0 wt% Ag before and after UV exposure was studied by Pyrolysis-gas chromatography–mass spectroscopy (Py-GC/MS).
Degree
thesis:*- Grantor dc:publisher
- Aristotle University Of Thessaloniki (AUTH)
- Year dc:date
- 2020
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Grigoriadou, Ifigeneia
- Γρηγοριάδου, Ιφιγένεια
Subjects
dc:subject × 14Rights
dc:rights- Statement dc:rights
-
- BY
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/47995