National Technical University of Athens (NTUA)
Προσομοίωση της κατεργασίας θερμής έλασης κραμάτων αλουμινίου με χρήση πεπερασμένων στοιχείων
Abstract
dc:descriptionIn the present dissertation, the crown evolution during hot rolling of aluminum alloys was studied via the Finite Element Method (FEM), in order to determine the applied force on the mill’s integrated bending system. For the simulation, a FEM model was developed that used the exact geometry of Elvals 4-high hot rolling mill, as well as real production data for industrial validation purposes. The results showed that are in good agreement with the industrial data and can be used during a pass schedule design. Crown can be adjusted with the bending system, however, in many cases the whole range of the system is not adequate to fully correct any crown variation through length. Thus, a thermal analysis was conducted on the work roll to study the geometric change through the length of a pass. The results showed that one of the most important reasons for crown variation through length is the camber evolution of the roll due to thermal load. Suggestions for the improvement of the rolls thermal stability are summarized below: •The use of both cooling units will increase cooling efficiency. •By increasing the roll temperature will lead to a more thermally stable roll. As a result: oA more uniform heat extraction from the plate through the length can be achieved. oThe roll will be more stable geometricallyoLess difference in the heat extraction between the front end and the main body of the plate until the roll’s surface reaches steady state. •Disable roll cooling for the first few meters of each pass in order to reach faster the thermal “steady state” on the surface.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2020
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Gavalas, Evangelos
- Γαβαλάς, Ευάγγελος
Subjects
dc:subject × 16- Έλαση
- Αλουμίνιο
- Μέθοδος πεπερασμένων στοιχείων
- Θερμομηχανικές κατεργασίες
- Παραγωγή
- Μορφοποίηση μετάλλων
- Rolling
- Aluminum
- Finite element method
- Thermomechanical processing
- Production
- Metal forming
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Μηχανολόγου Μηχανικού
- Engineering and Technology
- Mechanical Engineering
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/48047