Aristotle University Of Thessaloniki (AUTH)
Διερεύνηση της φυσικής προσρόφησης των λιπαντικών σε συνθήκες ημίυγρης τριβής που οδηγούν σε άρπαγμα
Abstract
dc:descriptionContemporary machine elements are often called to operate in mixed film lubrication regime. Under these conditions one possible mode of failure is scuffing. The adsorption of lubricant molecules on the friction surfaces can significantly reduce the risk of scuffing. The purpose of this work is to study, in a quantitative manner, the role of the lubricant’s physical adsorption on scuffing under conditions close to those found during the operation of gears and bearings. The two-disk test rig of the Labora-tory of Machine Elements and Machine Design was used for the experimental investigation, after making some necessary improvements. Additionally, a custom device was created from scratch that allowed for the measurement of roughness on the circumference of the disks. After conducting friction coefficient measurements in very low sliding speed and considering the effect of lubricant adsorption under these specific conditions, the heat of adsorption for FVA2 lubricant was determined. Next, scuffing experiments were conducted in appropriate conditions using carefully prepared disk speci-mens and FVA2 lubricant. For each experiment, in every stage, bulk temperature of each disk, friction force and other experimental data were collected and recorded. These data, together with disk sur-face roughness, were fed into an existing numerical model capable of solving the contact of two rough surfaces operating in mixed film lubrication regime, resulting in the determination of the pressure distribution. Also, a methodology was developed that allowed for the calculation of the temperature distribution at the interface of the rough sliding bodies. Based on the results of pres-sure, temperature and activation energy it was made possible to calculate for each surface in the contact the fractional coverage due to lubricant molecules adsorption. The calculations were con-ducted both for time-dependent and time-independent adsorption. The results from the theoretical investigation and the processing of all experimental data lead to the conclusion that the theory of adsorption can be used to describe a hydrodynamic pressure versus temperature curve that serves as a limit between scuffing-safe and scuffing-unsafe regions of operating conditions. It was found that the exact position of the limit-curve can be correlated with the surface roughness.
Degree
thesis:*- Grantor dc:publisher
- Aristotle University Of Thessaloniki (AUTH)
- Year dc:date
- 2020
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Gatsios, Stilianos
- Γάτσιος, Στυλιανός
Subjects
dc:subject × 9Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/48125