Back to search

University of Ioannina

Σύνθεση, χαρακτηρισμός και σχέση δομής-ιδιοτήτων τρισυσταδικών τριπολυμερών

Abstract

dc:description

In the current PhD thesis, fourteen (14) triblock terpolymers of the Α-b-Β-b-C type, were synthesized, where A, B, C are three blocks, with monomeric units exhibiting different chemical composition. The three blocks are polystyrene (PS), poly(butadiene) [with microstructure either high-1,4 (≈90%, PB1,4) or high-1,2 (100%, PB1,2)] and poly(dimethylsiloxane) (PDMS). Four different combinations were synthesized: PS-b-PB1,4-b-PDMS, PB1,4-b-PS-b-PDMS, PS-b-PB1,2-b-PDMS, PB1,2-b-PS-b-PDMS. The synthesis of the triblock terpolymers was achieved via anionic polymerization and sequential addition of monomers under high vacuum conditions. The synthesis of these terpolymers was accomplished with the use of well purified reagents and specific glass apparatuses manufactured by scientific glass blowing and the use of high vacuum technique. All final triblock terpolymers (Α-b-Β-b-C), as well as their homopolymer precursors and intermediate products (A and A-b-B) were molecularly characterized with size exclusion chromatography (SEC) , vapor pressure or membrane osmometry (VPO, ΜΟ), as well as with proton nuclear magnetic resonance spectroscopy (1H-NMR), leading to the conclusion that they can be considered model polymers exhibiting high molecular and compositional homogeneity. With the use of differential scanning calorimetry (DSC), the above samples (intermediate diblock precursors and final triblock terpolymers) were studied in order to calculate thermal transitions (Tg, Tc, Tm) for the different blocks of the samples and verify the possible partial mixing or not, by comparing the values of the glass transition temperatures (Tg) of the different blocks of the terpolymers with those of corresponding homopolymers according to the literature. The morphological characterization was accomplished with transmission electron microscopy (TEM) for all final samples and small angle X-ray scattering (SAXS) for nine of them. More specifically, the microphase separation of the terpolymers synthesized in this thesis was verified even for samples with very low total average number molecular weight ( ). The results indicated substantial differences of the adopted morphologies when compared with those reported in the literature for other triblock terpolymer sequences with similar compositions. Also, for verification of the three phases during TEM observation, staining of the PB blocks was necessary through vapors of aqueous solution of osmium tetroxide (OsO4) in order to alter the electron density and these blocks appear darker, the PDMS appeared as the grey phase and that of PS was white, in most cases. Furthermore, in samples with very low total the dimensions of the unit cell of the adopted morphologies was significantly low in the range between 15-20 nm. As for contact angle measurements, dilute solutions of the samples in toluene with concentration 1% w/v and 3% w/v were placed on silicon wafer and glass substrates and their contact angle with the two different substrates was measured. Water droplets were also placed on thin films of the samples which were deposited in specific substrates as well as in respective bulk films.

Degree

thesis:*
Grantor dc:publisher
University of Ioannina
Year dc:date
2020

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Miskaki, Christina
  • Μισκάκη, Χριστίνα

Subjects

dc:subject × 27

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/48171

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Miskaki, Christina; Μισκάκη, Χριστίνα. Σύνθεση, χαρακτηρισμός και σχέση δομής-ιδιοτήτων τρισυσταδικών τριπολυμερών. University of Ioannina, 2020. http://hdl.handle.net/10442/hedi/48171