Back to search

Aristotle University Of Thessaloniki (AUTH)

Χαρακτηρισμός νανοσωματιδίων προερχομένων από διεργασίες καύσης και συνθετικών νανοσωματιδίων και αξιολόγηση επιπτώσεων τεχνολογιών ελέγχου

Abstract

dc:description

Increased concerns have been raised the last decade on the potential of Nanoparticles (NPs) aerosols (combustion generated and/or engineered) to cause an adverse impact on humans health, affecting primarily the respiratory system, and the environment. This thesis will mainly focus on the research of combustion-generated NPs aerosols, without neglecting to incorporate a case study of Engineered Nanoparticles (ENPs) related to the emission control technologies of combustion engines. The physicochemical characteristics/properties of NPs aerosols (particle number and size, size distribution, chemical composition and surface area) have been analysed and measured with the aim to demonstrate the importance of understanding and assessment of the possible toxicity of nanomaterials. The standard characterisation techniques are presented together with innovative technologies developed based on the photoelectric effect and applied for the detection and/or classification of Polyaromatic Hydrocarbons (PAHs) adsorbed on combustion-generated particles surface from vehicle exhaust For the evaluation of the effect of the particle size distribution - one of the very pertinent factors influencing the toxic effect of exhaust emissions- a Selective Particle Size (SPS) sampler able to provide continuous delivery of soot particles of specific size ranges, has been designed, constructed and evaluated. The design of the sampler combines principles of aerosol transport phenomena and separation technologies. Particles smaller than a given size are removed from the exhaust by diffusional deposition, while removal of particles above a given size is achieved by low-pressure inertial impaction. By applying the SPS sampler to diesel exhaust, it is demonstrated that it is possible to obtain two aerosol streams with widely separated particle size distributions (of nanometric dimensions), suitable for biological exposure studies. In order to study the various health influencing parameters related to NPs aerosols, there is an urgent need for appropriate sampling devices and methods for cell exposure studies that simulate the respiratory system and facilitate the associated biological and toxicological tests. In this thesis, a specific novel concept for an in vitro air-liquid interface (ALI) cell culture exposure chamber was introduced to allow the uniform exposure of cell cultures to NPs aerosols. Furthermore, an advanced Multiculture Exposure Chamber (MEC II) was designed, constructed and evaluated. It was validated with two types of nanoparticles (Diesel engine soot aggregates and engineered nanoparticles used in different emission control technologies) and with state-of-the-art nanoparticle measurement instrumentation, to assess the local deposition of nanoparticles on the cell cultures. Also, the dose of nanoparticles to which cell cultures are being exposed was evaluated based on measurements of the size-specific nanoparticle collection efficiency. Also, the potential of the nanoparticles aerosols to increase the interleukins production and generate reactive oxygen species (ROS) (e.g. free radicals and peroxides generation) was monitored and thus expressing the oxidative stress of the cells which can cause extensive cellular damage or damage on DNA. Moreover, the production of ROS/oxidative stress in cells from CeO2 particles was analysed via the correlation of size and structural characteristics (crystallite size, specific surface area and porosity) to the ability to oxidise soot and generate ROS/oxidative stress in cells. Testing and evaluation of the exposure chamber were performed by exposing different cell line cultures either to engine exhaust aerosol or to metal oxide (CeO2) nanoparticles. Exposures of alveolar epithelial cells and blood cells to exhaust aerosol NPs were performed to determine whether the Diesel emission control technologies (Diesel Oxidation Catalyst (DOC) in series with a Diesel Particulate Filter (DPF) or the addition of CeO2 fuel additive to the Diesel fuel) affect the immunomodulatory responses of cells. Finally, in order to evaluate the effect of the exhaust particle size distribution in biological responses (cytokine promoter activity, cytokine secretion and cell viability of human cells) experiments applying the SPS in series with the exposure chamber, were undertaken.

Degree

thesis:*
Grantor dc:publisher
Aristotle University Of Thessaloniki (AUTH)
Year dc:date
2020

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Papaioannou, Eleni
  • Παπαϊωάννου, Ελένη

Subjects

dc:subject × 10

Rights

Language dc:language
eng

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/48278

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Papaioannou, Eleni; Παπαϊωάννου, Ελένη. Χαρακτηρισμός νανοσωματιδίων προερχομένων από διεργασίες καύσης και συνθετικών νανοσωματιδίων και αξιολόγηση επιπτώσεων τεχνολογιών ελέγχου. Aristotle University Of Thessaloniki (AUTH), 2020. http://hdl.handle.net/10442/hedi/48278