Back to search

University of Patras

Multi-data rate receiver for high-speed serial interfaces

Abstract

dc:description

The rapid advancement of intergraded circuits process technologies, in combination with the development of high-efficiency central processing Units (CPUs) over the recent years, have resulted in a significant improvement of the modern electronic systems computational capability. Nevertheless, the increase in the overall performance of a computational system, beyond its improved processing power, also requires the increase in the speed of data transmission within the subsystems, such as CPU, ram, storage devices, antennas etc., which it consists of. The data transmission between the integrated circuits incorporated into a modern electronic device mainboard, is realized by employing serial data transceivers, which are also referred in the literature as High-Speed Serial Interfaces (HSSIs). Besides of the ability to transmit data at high rates, HSSIs must be able to operate in a wide frequency range, while also offering low power consumption and low count of I/O pins. The subject of this thesis is the design and verification of the Receiver end, of such a high-speed serial transceiver, suitable for mobile electronic devices (smartphones, tablets etc.), as well as the development of novel design techniques and circuit architectures capable of offering improved performance in several critical subsystems of a HSSI Receiver. At first, the timing noise (Jitter) sources encountered in serial transmission links are studied and analyzed. A comprehensive method for the calculation of the jitter noise frequency components and the behavioral modeling of jitter noise sources, is proposed. In addition, a Verilog-AMS based HSSI jitter compliant generator, capable of generating random data sequences distorted by Jitter is implemented. The proposed Jitter generator can be easily parameterized in order to be compliant with the specifications of any serial data transmission standard while it can be utilized for the time efficient performance verification of any HSSI Receivers. Afterwards, the research deals with jitter elimination techniques, related to jitter which affect the transmitted signal due to transmission medium (channel) limited bandwidth. Also, a multi-rate programmable continuous time linear channel equalizer (CTLE), is proposed. The proposed equalizer, by exploiting a coarse small-signal transfer function tuning methodology, which is based on proper re-adjustments of its sub-circuits biasing characteristics, makes feasible its operation in the wide range of frequencies dictated by M-PHY standard. In parallel, it is able to offer optimized power consumption, depending on the input data rate. Continuing, the study focuses on high precision multiphase clock generation techniques. The generation of multiphase clocks is one of the most important operations, which the timing and synchronization circuits incorporated in HSSI transceivers must be able to accomplish. Two novel Phase Interpolator topologies are proposed, which offer the advantages of high accuracy, multi-rate operation, low power consumption as well as the ability to be easily reformed in order to support higher phase resolution. The ability of the proposed circuits to operate seamlessly in real world HSSI applications, while offering competitive performance characteristics, as compared to already existing topologies in the literature, is demonstrated through the design of a clock and data recovery (CDR) loop which is, perhaps, the most critical component of an HSSI Receiver. Finally, a GHz range clock frequency multiplier, is proposed. The proposed frequency multiplier, based on a multiphase combination technique, is capable of realizing clock frequency multiplications, with an integer multiplication step. By exploiting the same operation principle, the proposed circuit is also able to perform fractional frequency multiplications, through simple reconfiguration of the phase interpolator circuit. All circuits proposed in this thesis have been designed according to the specifications implied by MPHY ver. 3.0 standard, which is one of the most popular HSSI protocols for mobile electronic devices. In this way, their ability to be properly adopted in real-world serial data transmission systems is demonstrated.

Degree

thesis:*
Grantor dc:publisher
University of Patras
Year dc:date
2020

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Tsimpos, Andreas
  • Τσιμπός, Ανδρέας

Subjects

dc:subject × 20

Rights

Language dc:language
eng

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/48317

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Tsimpos, Andreas; Τσιμπός, Ανδρέας. Multi-data rate receiver for high-speed serial interfaces. University of Patras, 2020. http://hdl.handle.net/10442/hedi/48317