Back to search

National Technical University of Athens (NTUA)

Υψηλής ταχύτητας εκτύπωση με laser μη νευτώνειων αγώγιμων μελανιών μεταλλικών νανοσωματιδίων για την ανάπτυξη μικροηλεκτρονικών διατάξεων

Abstract

dc:description

The rapid development over the past decades in the field of microelectronics and flexible electronics has brought to the fore a plethora of new applications and technologies that require a different approach, in the way microelectronics are manufactured. Their complexity and diversity have led to the development of new techniques in which the final design is implemented digitally, directly from the design, without the use of masks or molds. At the same time, the majority of new applications are related to flexible substrates (paper, plastics, fabrics, etc.), which are not fully compatible with the use of traditional development techniques, such as lithography. Even the materials involved in the implementation of these new technologies require a new approach to the construction of microdevices. Materials such as biological molecules, polymeric materials, 2D materials, and nanoparticles have begun to be used and being tested as parts of microelectronic devices, because new ways of fabricating microelectronic devices have been developed. One of the most promising printing techniques, incorporating the above specifications, is the Laser Direct Printing (LDP) technique, or Laser-Induced Forward Transfer (LIFT) technique. LIFT has significant advantages over other printing techniques, such as, compatibility with a wide range of materials from liquid to solid phase, and at the same time, it can be combined with other laser techniques, providing greater flexibility in terms of complexity of applications that can be implemented. Despite the interest and expectations generated by LIFT technique and its application in the manufacture of microelectronics, there seems to be a difficulty in establishing it in the industry, which is mainly related to reliability issues in large-scale printing. To this end, in this thesis, the parameters and conditions affecting the printing of conductive metallic nanoparticle inks, both during single drop printing and continuous line printing, were studied. A laser printing station was developed, in which the combination of a high frequency (up to 500 kHz) pulsed laser source (Nd: YAG at 532 nm and pulse duration of some ns), with the utilization of a galvanometric mirror system for the scanning of the sample with the beam, made it possible to study printing at high speeds, up to 2 m/s. It also enabled the study of the sintering process at high frequencies and with high overlap rates during scanning. For the first time, conductive metallic nanoparticle (silver and copper) inks, specifically de-signed for LIFT printing, were studied, looking for those parameters that would ensure their optimum performance during the printing process. It has emerged, through simulations and experimental results, that the main characteristic of these inks and a necessary prerequisite for their printing through the formation of well-defined directional jets, was their non-Newtonian character and their pseudoplastic behavior. Due to this behavior, it is possible to print inks made up of a large percentage of metallic nanoparticles (60% - 80%), which greatly improves their conductivity after the sintering step. At the same time, the role of the rheological properties of the inks (viscosity and surface tension) during both the printing process and the final phase of the spread of the printed droplet onto the substrate has been highlighted, in combination with the surface wetting properties, and how these features affect the merging of the successive printed drops towards line formation. The experimental study of jet evolution and drop propagation was carried out, for the first time, using a high-speed camera imaging system (up to 500 kfps), which enabled the study of dynamic evolution of each jet, throughout the phenomenon, extracting important information such as, jet’s front velocity, break time, and its geometrical characteristics (droplet size during impact, thickness, etc.). The experimental results were combined with simulations of the jet’s evolution, using the ANSYS Fluent software and finite element method, which provided important information, mainly on the role of the non-Newtonian character in the evolution of the jet, but also features of the dynamic evolution of the phenomenon. After printing, sintering of the printed structures is also required, in which the nanoparticles, contained in the printed structure, partially melt in order to form a conductive road. In many applications, which do not involve thermally sensitive substrates, this process can be performed using a conventional oven. But when the application requires printing on sensitive substrates, such as for the manufacture of flexible electronics, the use of optical sintering is imperative. In this thesis, sintering and the parameters affecting it, which have to do with laser pulse length, wavelength, scan speed, always in combination with heat and optical properties of print-ed inks and substrates was studied using laser printed lines of metallic nanoparticle inks. The experimental study was carried out with the electrical characterization of the sintered structures on glass but also on flexible plastic substrates, such as PEN. The experimental process was also supported by simulations, using the finite element method in Sentaurus Process TCAD and AN-SYS Mechanical software, in order to determine the laser induced temperature profile, in the depth of the printed structure but also on the substrate. It appeared that short pulses (ns and ps) limit the thermal effect to the whole of the printed structure and to a very small depth in the substrate (in the order of a few tens of nm for ns pulses). We concluded that ns pulses can lead to the desired sintering effect while protecting the sensitive substrate to a large extent. Finally, a series of applications with particular geometrical and electrical characteristics were implemented to study the potential of these techniques. Electrodes in an area of 3x4 cm2, with line width down to 90 μm were developed for use in touch sensors. Electrodes for applications in organic photovoltaic cells (with line’s width down to 35 μm and line’s height lower than 400 nm) were printed and laser sintered, while different designs of RFIDs antennas were developed, both with the laser printing of Ag or Cu nanoparticle inks.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2020

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Theodorakos, Ioannis
  • Θεοδωράκος, Ιωάννης

Subjects

dc:subject × 12

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/48369

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Theodorakos, Ioannis; Θεοδωράκος, Ιωάννης. Υψηλής ταχύτητας εκτύπωση με laser μη νευτώνειων αγώγιμων μελανιών μεταλλικών νανοσωματιδίων για την ανάπτυξη μικροηλεκτρονικών διατάξεων. National Technical University of Athens (NTUA), 2020. http://hdl.handle.net/10442/hedi/48369