Back to search

National Technical University of Athens (NTUA)

Σχεδιασμός πύργων ανεμογεννητριών από σύνθετα υλικά

Abstract

dc:description

The main objective of the present dissertation is the investigation of the structural behavior along with an approach to the design of wind turbine towers made of GFRP. In order to achieve this goal, the following procedures were executed: a) Experimental investigation of the mechanical properties of a GFRP material. b) Comparison between experimental results and results obtained using the mechanics of composite materials. c) Experimental investigation for the static behavior of tapered poles made of GFRP. d) Calibration of a FEA model so as to conduct analyses. e) Parametric analyses regarding the geometry of GFRP towers and the stacking sequence of the composite material. f) Design of the tower (ultimate limit state). g) Analyses and design of an equivalent steel tower. h) Comparison between GFRP and steel tower and extrapolation of conclusions.The achievement of the above objectives was realized in three stages. First, a thorough study of the relative literature took place. Analyses in several types of towers, especially in those with tapered shape, were conducted. Afterwards, experiments were carried out in two phases. Initially, coupons made of GFRP were tested in tension so as to obtain the mechanical properties of the material. In the next phase, GFRP tapered poles were subjected to lateral loading and conclusions regarding the type of the failure and the static response of the specimens were derived. Subsequently, the calibration of a FEA model was also achieved. In the third stage, parametric analyses and the design of a tapered tower made of the experimental material followed. The tower supported a wind turbine of 30kW nominal power meant to be constructed in Canada. Finally, the design of an equivalent tower made of steel was realized.Some of the main conclusions of the dissertation are summarized as follows: 1) Mechanics of composite materials offer reliable results for the GFRP properties. 2) Tapered poles made of GFRP can respond sufficiently when they are subjected to lateral loading. 3) There are numerous factors that cause uncertainties regarding the behavior of the GFRP materials. 4) The influence of the geometry of a GFRP tapered tower is very crucial. The geometrical characteristics affect the tower mass and the critical tip deflection. 5) An increase in the number of layers consist of fibers with longitudinal direction leads to the reduction of the critical tip deflection. The necessity of the implementation of circumferential layers, in order to avoid local failures, is proved. The orientation of the longitudinal layers should be as near as possible to the length of the tower. 6) The comparison between the towers made of steel and GFRP respectively led to the conclusion that composite materials can be an excellent alternative for the design of such structures.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2020

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Altanopoulos, Thomas
  • Αλτανόπουλος, Θωμάς

Subjects

dc:subject × 20

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/48446

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Altanopoulos, Thomas; Αλτανόπουλος, Θωμάς. Σχεδιασμός πύργων ανεμογεννητριών από σύνθετα υλικά. National Technical University of Athens (NTUA), 2020. http://hdl.handle.net/10442/hedi/48446