Hellenic Open University
Αξιοποίηση ενεργειακών φυτών για την παραγωγή πράσινου diesel στον Ελλαδικό χώρο
Abstract
dc:descriptionThe main goal of the dissertation is to investigate the possibility of utilizing energy crops for the production of renewable (green) diesel in Greece. More specifically, we are attempting a comparative study of oils from four energy crops in Greece in order to highlight the most suitable for its use as a raw material in the production of green diesel. These are the oils of sunflower, rapeseed, soya and Cynara cardunculus. The comparative evaluation moved in two axes: the first is the comparative study in terms of agronomic characteristics, cultivation potential and cultivation costs and is based on data from the literature. The second and main axis has to do with the experimental evaluation of oils in terms of their ability to convert to green diesel through the process of their catalytic selective deoxygenation. To implement this sub-objective axis, we would have to use a suitable solid catalyst. We approached this as an additional challenge for the dissertation, choosing not to use an already studied catalyst, but to develop new catalysts that had not previously been studied in this process, contributing new scientific knowledge to the international literature. So our choice was to develop nickel catalysts based on titanium oxide (TiO2) support in the form of anatase. The implementation of the first sub-goal led to the conclusion that of the four oils of energy crops in Greece, what we prefer to be used as a raw material for the production of green diesel is Cynara cardunculus oil. Our preference for this oil is based on some important advantages of its cultivation, such as that it can be grown in poor and degraded soils, has too low water requirements, high biomass yields and multiple energy utilization. More specifically, the lignocellulosic biomass derived from the plant stems can be used for the production of solid biofuel and the seeds for the production of oil, so the cultivation cost can be divided between the two, with the result that the cost of oil is significantly reduced.The implementation of the second sub-objective was done in three steps. The first step was to find the optimal loading of Ni in the Nickel supported TiO2 catalysts, for the process of selective deoxygenation of natural triglycerides. For this purpose we developed nickel catalysts supported on titania with various Ni loadings, using as a synthesis technique the incipient wetness impregnation and as a nickel precursor the nickel-ethylenediamine complex [Ni(en)3(NO3)2]. Sunflower oil was selected as the raw material for biomass triglyceride for selective deoxygenation in green diesel production. The most effective catalyst proved to be the one with a percentage of 50% wt of nickel, showing conversion of sunflower oil after 9h of reaction equal to 94% and yield of hydrocarbons produced in the diesel region equal to 21%. In the second step we tried to improve the performance of the above catalyst, synthesizing it with different synthesis techniques and specifically, with the technique of successive dry impregnation (with different precursor of Ni), wet impregnation, deposition - precipitation at room temperature with ammonia as a precipitating agent and deposition - precipitation at high temperature (110οC) with urea as a precipitating agent. Both the nickel-ethylenediamine complex [Ni(en)3(NO3)2] and the nickel nitrate salt [Ni(NO3)2*6H2O] were used as the nickel precursor. The results of the evaluation of the catalysts through the process of selective deoxygenation of sunflower oil showed that the catalyst prepared by the technique of deposition - precipitation at high temperature and with urea as a precipitating agent is the most active and selective, showing complete conversion of commercial oil from the 6th hour of reaction and yield to hydrocarbons, after 9h of reaction, equal to 38%. In the third step we tried to further improve the efficiency of the above catalyst, trying to add Mo as a promoter. To find the synergistic ratio of Ni/(Ni+Mo) in NiMο/TiO2 catalysts, we developed catalysts with different Ni/(Ni+Mo) ratios and subjected them to catalytic tests through the process of selective deoxygenation of sunflower oil. All catalysts proved to be very effective, as they show a complete conversion of sunflower oil from just the 2nd hour of the reaction. The most selective for the production of hydrocarbons is the catalyst with ratio Ni/(Ni+Mo) = 0.99 (synergistic ratio), which showed a yield of 72% and is the optimum catalyst synthesized in the present dissertation. Finally, the four oils of the energy crops of Greece (Cynara cardunculus oil, rapeseed oil, sunflower oil and soybean oil) appear equally suitable for their conversion into green diesel. In the presence of the above optimum catalyst, all four oils were completely converted and led to the production of hydrocarbons in the diesel region (C15-C18) with a yield of 65 ± 2%. In other words, there were no significant differences between the four oils.
Degree
thesis:*- Grantor dc:publisher
- Hellenic Open University
- Year dc:date
- 2020
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Petropoulos, Georgios
- Πετρόπουλος, Γεώργιος
Subjects
dc:subject × 20Rights
dc:rights- Statement dc:rights
-
- BY_SA
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/48701