Back to search

National and Kapodistrian University of Athens

Ενεργειακή διαχείριση και διασφάλιση κατάλληλων εσωτερικών περιβαλλοντικών συνθηκών σε κτίρια κατοικιών με επίκεντρο τον χρήστη

Abstract

dc:description

The aim of this thesis is to characterise and quantify the effect of residential building users on energy consumption and indoor environmental conditions and eventually to develop empowering tools that will support them in the achievement of energy savings and improved health and comfort. In this framework, twenty six dwellings with similar technical and architectural characteristics in a building cluster in Florence, Italy were studied. The variables monitored and considered for analysis in this thesis are: indoor Temperature, Relative Humidity, CO2 concentration, natural gas consumption and electricity consumption. Data were collected, managed, validated and communicated to the user with the help of Information and Communication Technology (ICT). The experimental setup was part of the EU funded ICE-WISH project (Grant Agreement number 270898). The following validation checks were performed on the collected data on an ongoing basis with the help of a developed algorithm: time-step, rational check, range gate validation, graphical validation. The experimental data were used, first of all, for the recognition of energy behaviour patterns. For this purpose a pattern recognition methodology consisting of two multivariate statistical analysis methods was developed; Principal Component Analysis (PCA) and TwoStep Cluster Analysis. Principal Component Analysis helped determine the hours during the day with recurrent activity while two step cluster analysis was used to extract and analyze the major behavioural patterns. The methods were applied on 5 out of 26 dwellings. All 5 dwellings are on the fourth floor of the same building so share similar structural and thermal characteristics while differ in orientation, size and anything that has to do with the occupants (e.g. number of occupants, habits and lifestyle, selected systems and appliances, operation of systems and appliances etc). The aim of this selection was to allow for a more objective comparison and quantification of the differences that the “user” factor can bring to the energy and environmental patterns of residential buildings. Effectively, typical 24-hour profiles for heating, electricy consumption and CO2 concentrations for each dwelling were formed from which important conclusions about the operation of the heating system, electricitcy consumption, ventilation and the presence of occupants were drawn and thus a specific general profile for each dwelling was created. The identified differences in the behavioural patterns are important and in agreement with literature that supports that the behaviour of the user has a non-deterministic nature. It also verifies that people heat their homes in different ways and at different times thus questioning the standardized heating profiles and temperature settings used in energy simulation for residential buildings. Therefore, the profiles related to energy behavior that are inputted in energy simulation models cannot be fully predictable and repeatable for a household and certainly cannot be identical for all. In addition, it is demonstrated that although Principal Component Analysis is not able to produce the exact 24 hour heating profiles, as is cluster analysis, it is still capable of accurately indicating the times of day that the heating system is operated over the heating season thus offering a succinct overview of the heating practices of a household. Next, an energy simulation model of a specific dwelling was created and calibrated according to the 24-hour profiles for heating, electricity consumption, ventilation and occupant presence identified through pattern recognition. The calibrated simulation model was adapted to a number of heating system operation scenarios from other dwellings. The aim of these adaptations was to objectively compare and quantify the differences that the user factor can bring to the energy consumption for heating and to thermal comfort. The findings add to the growing body of literature that supports that the behaviour of the user is the variable that brings major uncertainty into the results of energy simulation and in prediction methods for residential buildings and calls out for better guidance for the heating set point values and heating periods to be used in energy modeling. A methodology for the calculation of an indoor environmental quality indicator for residential buildings, the ‘Dwelling Environmental Quality Index’ (DEQI) was also developed. The purpose of this index is to assist both households and property managers to identify potential problems with the indoor environment whilst ensuring that indoor environmental quality is not compromised in favour of energy savings. Based on the combined effect of three simple and commonly measured indoor environmental parameters – air temperature, relative humidity and CO2 concentrations; the index reflects in a single value the quality of indoor environmental conditions for the monitored period, in compliance with the European standard EN15251. The application of the Dwelling Environmental Quality Index in single dwellings and in building blocks is demonstrated. The usability of the index as a communication and management tool for individual households and property managers is also shown. Such an index could form an important part of the Smart Readiness Indicator (SRI). The relevant publication in the Indoor and Built Environment Journal received the Best Paper Award for year 2017. Finally, an algorithm for the provision of tailored energy advise without concessions with respect to health and comfort was designed. The algorithm is human-centric as it empowers the user to act according to their needs and preferences based on the information provided through the service. The aim is to improve the energy behaviour of residential building occupants through the offered information and effectively lead to energy savings. Advice is offered through an ICT service and complements the direct feedback and information offered through it. The selection of the advice to be offered through the advice programme is a result of extensice literature review and a user requirements survey. The survey showed that the primary criterion for the adoption of the proposed advice was cost. Therefore, the offered advice are mainly no- to low-cost and do not involve any investment for the improvement of the building fabric or replacement of systems. The advice is offered every 15 minutes and tailored to the household conditions as they are determined based on the indoor environmental conditions at the time of the measurement, the operation (or not) of the heating system and by the time of year.

Degree

thesis:*
Grantor dc:publisher
National and Kapodistrian University of Athens
Year dc:date
2020

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Laskari, Marina-Theoni
  • Λάσκαρη, Μαρίνα-Θεώνη

Subjects

dc:subject × 44

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/48734

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Laskari, Marina-Theoni; Λάσκαρη, Μαρίνα-Θεώνη. Ενεργειακή διαχείριση και διασφάλιση κατάλληλων εσωτερικών περιβαλλοντικών συνθηκών σε κτίρια κατοικιών με επίκεντρο τον χρήστη. National and Kapodistrian University of Athens, 2020. http://hdl.handle.net/10442/hedi/48734