Aristotle University Of Thessaloniki (AUTH)
Ιστοτεχνολογική ανάπτυξη εξατομικευμένου χόνδρινου εμφυτεύματος από ανθρώπινα μεσεγχυματικά βλαστικά κύτταρα λιπώδους ιστού, σε τρισδιάστατο εκτυπωμένο ικρίωμα με χρήση προηγμένων μεθόδων κατασκευής CAD/CAM και βιοαντιδραστήρα
Abstract
dc:descriptionAdditive Manufacturing was used to fabricate 3D-printed poly (ε-caprolactone) scaffolds of different geometry topologies and porosities. A comparative analysis was made to present hyaline cartilage development from human Adipose Tissue Derived Mesenchymal Stem Cells (ADMSCs) on three different, newly designed scaffold geometry patterns. All scaffolds were examined for cell proliferation, colonization, and differentiation, in relation to the scaffold's structure, as well as to the mechanical properties of the final constructs. Emphasis was given on the scaffold’s microarchitecture and macroarchitecture, for optimal and enhanced chondrogenic differentiation, as an important parameter, not well studied in the literature. Among the three patterns tested, RO45 was the most favorable for chondrogenic differentiation, whereas 3DHC better supported cell proliferation and scaffold penetration, exhibiting also the highest rate of increase of the final construct’s mechanical properties. It is concluded that by choosing the optimal scaffold architecture, the resulting properties of these cartilaginous constructs can better approximate those of the normal cartilage. In addition, the most favorable microenvironment was determined to better support cell proliferation and differentiation. For this purpose, a perfusion bioreactor was used, which is attracting researcher’s attention as an effective, modern tool in tissue engineering applications. Collagen was also applied to PCL scaffolds as a natural biomaterial with outstanding biocompatibility, biodegradability, and non-toxic characteristics. 3D printed polycaprolactone (PCL) scaffolds with rectangular pores were coated with collagen either as a coating on the scaffold’s trabeculae, or as a gel-cell solution penetrating scaffolds’ pore. Two different differentiation culture media were used to test chondrogenic differentiation in scaffolds with or without collagen, under static and dynamic culture conditions. Dynamic culture achieved better penetration and uniform distribution of the cells within the scaffold. Furthermore, non-collagen scaffolds combined with the in house TGF-β2 based medium, augmented chondrogenic differentiation performance as a result of the beneficial mechanical stimulus of dynamic culture. Cell adhesion on 3D-scaffolds is the first challenging task in order to succeed high cell densities and even cell distribution. For this purpose, a 3D-cell Culture Device (3D-CD) was designed for static seeding and cultivation, intended to be used with any kind of scaffold, limiting cell loss and facilitating nutrient supply. 3D printing technology was used for both scaffold and device fabrication. Apart from testing the device, the purpose of this study was to assess and compare static and dynamic seeding in normoxic and hypoxic conditions, and their effects on parameters such as cell seeding efficiency, cell distribution and cell proliferation. The 3D-cell Culture Device (3D-CD) enhanced cell seeding efficiency with almost no cell loss and achieved uniform cell distribution in all scaffold ‘zones’, processed and analyzed by micro-CT scans and projection images.Chondrogenic differentiation was further evaluated with this device (3D-CD). 3D printed PCL scaffolds fixed on the (3D-CD) device, seeded with hADMSCs and cultured under normoxia or hypoxia. The culture device (3D-CD) in combination with hypoxic culture conditions resulted in a hyaline like cartilage tissue which overall exhibited ideal characteristics, such as an abundant extracellular matrix (ECM), rich in glycosaminoglycans and proteoglycans, and with a significantly high proportion of type II collagen to type I collagen. Finally, it is worth mentioning that the resulting mechanical properties can withstand even the most extreme conditions of daily mechanical stresses within the joints.
Degree
thesis:*- Grantor dc:publisher
- Aristotle University Of Thessaloniki (AUTH)
- Year dc:date
- 2020
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Theodoridis, Konstantinos
- Θεοδωρίδης, Κωνσταντίνος
Subjects
dc:subject × 47- Αρθρικός χόνδρος
- Μεσεγχυματικά βλαστικά κύτταρα
- Τρισδιάστατη εκτύπωση (3D printing)
- Ικριώματα μηχανικής ιστών (scaffolds)
- Βιοϋλικά
- Πολυκαπρολακτόνη
- Βιοαντιδραστήρας
- CAD/CAM
- Μηχανική ιστών (Ιστομηχανική)
- Υαλοειδής χόνδρος
- Κολλαγόνο
- Αναγεννητική ιατρική
- Articular cartilage
- Mesenchymal stem cells
- 3d printing
- Scaffolds
- Biomaterials
- Polycaprolactone, PCL
- Bioreactor
- Tissue engineering
- Hyaline cartilage
- Collagen
- Regenerative medicine
- Βιοϊατρική Μηχανική
- Επιστήμες Μηχανικού και Τεχνολογία
- Μηχανική κυττάρων και ιστών
- Βιομηχανική Βιοτεχνολογία
- Βιο- υλικά
- Μηχανική Υλικών
- Επιστήμη υλικών, γενικά
- Ιατρική Βιοτεχνολογία
- Ιατρική και Επιστήμες Υγείας
- Βασική Ιατρική
- Βασική ιατρική, γενικά
- Ιστολογία
- Medical Engineering
- Engineering and Technology
- Cell and Tissue Engineering
- Biomedical Engineering
- Industrial Biotechnology
- Materials Engineering
- Materials science, general
- Medical Biotechnology
- Medical and Health Sciences
- Basic Medicine
- Basic medicine, general
- Histology
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/48740