University of Patras
Πειραματική διερεύνηση του τυρβώδους πεδίου ανάμειξης και καύσης σε πρωτεύουσα ζώνης σταθεροποίησης φλόγας με διαστρωμάτωση μείγματος και υπό την επίδραση ενός συρρέοντος δακτυλιοειδούς στροβιλιζόμενου ρεύματος
Abstract
dc:descriptionIn last decades it has become imperative the need of the reduction of the global exhaust emissions, which are responsible for the creation of the greenhouse effect. In the conference on Climate Change, in Paris at 2015 it was agreed to limit the Earth's warming in less than 2oC. According to the International Energy Agency (IEA), if the global community continues its current policy, without additional changes in relation to energy efficiency, is expected to have an increase in its energy needs of 1.3% per year by 2040. The increasing trend of the exhaust emissions is a result of the accumulation of exhaust gases emitted by new combustion systems and by existing systems. In new combustion systems, in order to address the problem of the exhaust gas emissions, are being used innovative low emission combustion technologies or other forms of energy, such as electricity or renewable energy sources, or hybrid systems, in which the renewable energy sources are combined with innovative combustion technologies. The, already, existing systems, which are been relied on the combustion of solid carbon fuels, such as anthracite, lignite, etc., and are being characterized by their prolonged existence, are responsible for 30% of all energy related emissions. In these systems the reduction in the exhaust emissions is being achieved by replacing the heavier and more polluting solid fuels with the natural gas. Of course, the increasing use of natural gas as fuel raises a key question, whether natural gas networks can provide low or zero carbon energy sources, such as biofuels. In this context, the main objectives of the redesign and optimization of combustion systems for energy production are to increase the produced energy per kilogram of fuel, to increase the operational efficiency and to significantly reduce the pollutant emissions (Near Zero Emissions (NZE)). These are essential for the combustion systems, to comply with the increasingly stringent relevant legislationIn a line with these criteria, it has been developed a burner which aims to improve combustion efficiency and stabilization and to reduce exhaust emissions. In particular, in this thesis investigated the interaction of an axial sequence of two recirculation zones in a bluff body stabilized stratified flame. The premixer/burner assembly consisted of two cavities formed between three disks, connected along their axis with a vertical fuel supply, hollow tube. The secondary cavity promoted partial premixing with the central air and supplied the after body primary stabilization region with a radial equivalence ratio gradient. The incoming mixture is regulated via the central air, the injected fuel, and the secondary cavity. The bluff body flame zone was surrounded with a coannular, secondary swirl stream and an external, surrounding air flow. The assembly is capable of establishing an axial sequence of two recirculation zones, the primary recirculation zone (CTRZ) and the adjacent swirl-induced vortex breakdown region that promotes further mixing of the combustion products with the swirl stream. In this configuration the swirl stream is imposed on the combustion gasses instead of the traditional bluff body, quarl expansions or in-tandem swirl arrangements in which the swirl is imposed of the flame anchoring region. This complex configuration has not yet been fully investigated. Here the impact of the interactions of the central fuel supply, the variable inlet swirl, and the external air coflow settings, with the variable two-recirculation wake zone, on fuel-air mixing fields and emissions levels are investigated under inert and reacting conditions. The study of this complex set up is divided into three sections: the isothermal field, the mixing field and the reacting field. Each field was studied gradually starting from the simplest case, this without the imposition of the coannular swirling stream and without the use of the external air coflow and end up to the most complex, which combined all the parameters. First the isothermal and inert, fuel-injected, wake topologies will be presented to depict the variety of fuel-air mixing configurations that can be sustained by the multi-annular system. The isothermal flow field was measured using a 2D-PIV system. The impact of the imposition of the swirl stream and the external, surrounding air stream on the main flow, was evaluated through the measured velocity and turbulent flow fields and these are presented in terms of contour plots. The fuel concentrations through the wake were measured using the FTIR system. The measured fuel distributions were obtained for different annular flow settings and fuel injections, maintaining the primary zone inlet stratification. The fuel was injected either in the primary cavity through the second disk or in the secondary swirl air stream or in both streams simultaneously. The counterpart lean and ultralean reacting wakes were then studied to appraise the capacity of the system to regulate effectively the primary combustion process. The 2D-PIV system was also, used to measure the velocity and turbulent fields. These measurements were used to evaluate the alterations in the reacting flow field against of the isothermal flow field. The PIV measurements in tandem with measurements of chemiluminescence imaging of OH* and CH* and temperatures assisted in evaluation of the flame structure. Finally exhaust gas measurements of major species were obtained, with an exhaust gas analyzer, to assess the emission and combustion performance of this burner. Long term the target is to employ this burner in various practical combustion systems such as gas turbines, internal combustion engines, etc. This burner is being attractive for its application in practical combustion systems, due to its innovation. The innovation is based on the introducing the swirl stream into the exhaust gas region and on the interaction of the two adjacent recirculation, zones. The combustion products are being mixed with excess air or with a fuel/air mixture causing further emission reduction. The burner through its operating set up is capable to provide full control of both the mixture mixing and the dilution of the exhaust emissions with the excess air. Moreover, its operation flexibility makes it attractive in practical systems, as it is able to cover the energy needs with a low fuel consumption. In addition, the combination of stratification with the swirling technology, it significantly improves the flame stability, while at the same time the flashback and lift off phenomena, which are undesirable in combustion systems, have been prevented. Finally, the combustion efficiency of the system is maintained at satisfactory levels due to the mixture stratification and the reduced emissions.
Degree
thesis:*- Grantor dc:publisher
- University of Patras
- Year dc:date
- 2020
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Dogkas, Eleftherios
- Δόγκας, Ελευθέριος
Subjects
dc:subject × 17- Τυρβώδες φλόγες προπάνιου
- Διαστρωμάτωση μείγματος
- Καυστήρας με χρήση στροβιλισμού
- PIV
- Φασματοσκοπία FTIR
- Χημειοφωταύγεια
- Turbulent propane flames
- Swirl burner
- Stratified flames
- CH* and OH* chemiluminescence
- FTIR spectroscopy
- Επιστήμη Μηχανολόγου Μηχανικού
- Επιστήμες Μηχανικού και Τεχνολογία
- Θερμοδυναμική
- Mechanical Engineering
- Engineering and Technology
- Thermodynamics
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/48853