University of Thessaly (UTH)
Models and algorithms for Soft Error Rate estimation in ICs
Abstract
dc:descriptionIn state-of-the-art technologies utilized to design Integrated Circuits (ICs), failures, called Soft Errors caused by factors such as radiation or alpha particles, constitute a significant threat for circuit reliability. Many studies have focused on analyzing Soft Errors' effect on memory elements such as flip-flops, DRAMs and SRAMs. On the other hand, the protection of the ICs combinational part to external parameters has several shortcomings. For this reason, the evaluation of systems susceptibility to Soft Errors, regarding combinational logic as the primary part of the analysis, by an accurate and fast tool would be beneficial for the technology community.The continuous downscaling of device feature size and the reduction in supply voltage in CMOS technology tend to worsen this severe problem. Many methodologies have tried to model and simulate transient glitches induced by particle strikes. However, some of them are not considered accurate since they analyze transient faults without taking into account all the appropriate parameters, and others are not fast enough. This PhD dissertation describes a fast simulator based on a methodology, which focuses on the modeling of glitches generation and their propagation at the circuit gate level. Therefore, ICs susceptibility to these effects is evaluated, calculating Soft Error Rate (SER). Furthermore, SER estimation of ICs, taking into consideration multiple transient faults, is a necessary process and is a fundamental aspect of the particular work.A reliable tool was developed, basing on Monte-Carlo simulations, the modeling of masking mechanisms (Logical, Electrical, and Timing), and the consideration of placement information. ISCAS’ 89 benchmarks were designed, utilizing two different technologies, and their SER is evaluated in FIT (failure in time), which is equivalent to the number of failures per one billion hours. Furthermore, SER is estimated, considering some significant factors such as sensitive regions, reconvergence pulses, the RC models, since they have a critical impact on the proposed analysis. The experiment results execution time for circuits is quite satisfactory, and the process is accelerated even more by implementing parallel programming. Finally, TCAD and SPICE simulations are employed to characterize transient faults and verify results obtained by the proposed tool.
Degree
thesis:*- Grantor dc:publisher
- University of Thessaly (UTH)
- Year dc:date
- 2021
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Paliaroutis, Georgios-Ioannis
- Παλιαρούτης, Γεώργιος-Ιωάννης
Subjects
dc:subject × 22- Ολοκληρωμένα κυκλώματα
- Ακτινοβολία
- Σωματίδια α
- Πολλαπλά σφάλματα
- Μηχανισμοί κάλυψης
- Ευαίσθητες περιοχές
- Soft error rate
- Radiation faults
- Multiple transient faults
- Monte-Carlo simulations
- Sensitive regions
- Particle hits
- Logical masking
- Electrical masking
- Timing masking
- Static timing analysis
- Επιστήμη Ηλεκτρολόγου Μηχανικού, Ηλεκτρονικού Μηχανικού, Μηχανικού Η/Υ
- Επιστήμες Μηχανικού και Τεχνολογία
- Ηλεκτρική και Ηλεκτρονική μηχανική
- Electrical Engineering, Electronic Engineering, Information Engineering
- Engineering and Technology
- Electrical and Electronic Engineering
Rights
- Language dc:language
- eng
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/49014