Back to search

University of Patras

Ανάπτυξη φωτοηλεκτροχρωμικών διατάξεων με διαφορετικές αρχιτεκτονικές για αυξημένη σταθερότητα και απόδοση

Abstract

dc:description

In recent years, the increasing global energy demand, combined with the environmental problems caused by the use of fossil fuels, have shifted scientific research interest towards renewable energy sources, with solar energy being in the spotlight. A large part of that energy demand originates from buildings and specifically from the needs of their residents for heating, cooling and lighting. For the above reasons, the reduction of energy consumption in the building sector is of utmost importance.The current PhD thesis concerns the development of "partly covered" photoelectrochromic devices ("partly covered" PECs) with different architectures, aiming to improve their stability and efficiency. These devices are hybrids that combine a dye sensitized solar cell (PV) and an electrochromic unit (EC). The PV cell here serves a dual purpose: to generate electricity and to provide the necessary electrical potential for the coloration of the device. In this way, PEC devices can effectively exploit solar energy as well as increase energy savings in buildings through the dynamic control of thermal loads.Photoelectrochromic devices constitute a newly developed technology and therefore no commercial product has been developed yet. In addition, since they are complex devices, certain compromises need to be made regarding the PV and EC parts to optimize functionality. In the first section of this thesis, the stability of the devices was evaluated both by storing them in the dark between experimental characterizations, as well as in real operating conditions. It was found that the devices are subject to stability issues as regards their optical and photovoltaic performance. In particular, they showed a gradual loss of coloration depth, due to recombination phenomena at the WO3 / electrolyte interface. Furthermore, when the devices are subjected to continuous lighting, reduction of their photovoltaic efficiency is caused, as well as a permanent coloration of WO3 due to the “deep trapping” of Li ions. In order to solve the problems mentioned above, a series of materials and different architectures have been studied. Initially, the effect of the polymer additive PMMA (polymethylmethacrylate) on the electrolyte at various concentrations and molecular weights was investigated. It was found that for devices that had similar values of the parameter "concentration x molecular weight", similar values photovoltaic efficiency were also obtained. Devices that incorporated polymer electrolytes, exhibited increased stability and efficiency whilst operating under continuous sun exposure.The substitution of iodine electrolyte with cobalt complexes in PEC devices was investigated next. The anodes of these devices were sensitized with the organic dye MK2 and were then subjected to long term experiments. The most important difference from iodine electrolytes, is that the cobalt devices, upon coloration, assume a dark blue tint in the visible spectrum, similar to that of electrochromic windows. These devices, however, showed increased recombination losses between photoelectrons and the Co species.In the next section of the thesis, barrier layers were used, in order to reduce the recombination losses at the WO3/electrolyte interface. Cyclic voltammetry experiments were carried out, with two electrolytes (one with an iodine redox couple and one with Li ions), and it was found that samples with a Glass/FTO/WO3/ZnS configuration exhibited reduced optical losses and satisfactory coloration speed respectively. Therefore, this research was concluded with the most promising barrier layers being incorporated into PEC devices. These devices showed an improvement to their optical stability up to 43% after a span of one year, depending on the electrolyte used. In order to increase the power conversion efficiency of the "partly covered" PEC devices, a different architecture was proposed, in which the deposition order of films on the anode was reversed. In the new architecture TiO2 was grown on FTO glass, followed by WO3. Due to this change, the TiO2 film could now be properly processed without affecting the morphology of WO3. A remarkable increase in the PV efficiency was observed, up to 4 times more than the devices with the original architecture. Also, a very important characteristic of the new architecture is that high coloration kinetics can be retained, even though the area of the PV element is reduced by a factor of 4. In the last part of the PhD thesis a new architecture was proposed, that permits better control of both the generated electrical power and the coloration of the PECs. These devices incorporate a monolithic PV perovskite element in a 3-electrode configuration, where the two units, PV and EC, share a common anode and have different cathodes. This architecture allows the existence of many operating states and functionalities: a) coloration through short-circuiting the two cathodes, with the additional feature of controlling the coloration speed through an electrical load b) solar power production without affecting the coloration state of the device. c) electric charge storage in the EC unit, that can be reclaimed when coloration is not needed. Finally, the use of perovskite PVs allows for higher power conversion efficiencies than those of dye sensitized solar cells.

Degree

thesis:*
Grantor dc:publisher
University of Patras
Year dc:date
2021

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Ntokouzis, Alexandros-Panagiotis
  • Ντοκούζης, Αλέξανδρος-Παναγιώτης

Subjects

dc:subject × 14

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/49043

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Ntokouzis, Alexandros-Panagiotis; Ντοκούζης, Αλέξανδρος-Παναγιώτης. Ανάπτυξη φωτοηλεκτροχρωμικών διατάξεων με διαφορετικές αρχιτεκτονικές για αυξημένη σταθερότητα και απόδοση. University of Patras, 2021. http://hdl.handle.net/10442/hedi/49043