University of Patras
Ανθρακικά πετρώματα από περιοχές της Δυτικής Ελλάδας: αξιολόγησή τους για χρήση σε βιομηχανικές εφαρμογές
Abstract
dc:descriptionThe present PhD thesis examined the geological, lithological, mineralogical and geochemical characteristics, of Mesozoic carbonate rocks, of Ionian, Gavrovo – Tripolis and Olonos – Pindos, geotectonic units, which were derived from Achaia and Etoloakarnania regions (west Greece). Furthermore, there was determination of the physical, chemical and technological properties on their ultrafine, ground product. The study focuses on understanding the role of factors that affect these properties, the relationship they have with the original petrographic and mineralogical properties of rocks and finally on the suitability of carbonate rocks for use as fillers and in various industrial applications. During the first stage of the geological field study, the exposed carbonate outcrops were investigated, by collecting field observations about significant features and fresh rocks of limestones, dolostones and dolomitic limestones. The sampling took place, based on lithological variations recognized in the field, representative from the whole geographical and stratigraphic range of the study area. Digitized geological and sampling maps, were produced.Subsequently, the collected samples were subjected to various laboratory tests. Lithological study included, macroscopic description, based on texture, grain size and colour of rocks, and microscopic examination, of primary and secondary mineralogical and textural characteristics under transmitted light. As a next step, carbonate rocks were classified in petrographic groups – lithotypes, according to Folk and Dunham classification schemes. It was concluded that the majority of rocks derived from Pindos zone, belong mainly to micritic lithotypes (rather than sparitic ones), Tripolis zone carbonates are characterized by low presence of micritic types and the appearance of dolostones in Achaia and finally carbonates from Ionia zone, are distributed among micritic and sparitic lithotypes. After the acquired results from petrographic study, representative samples were selected in order to be analyzed for their mineralogy, mineral chemistry and chemical composition. By using the X-ray powder diffraction method, both on bulk samples and insoluble residue of carbonate rocks, the mineralogical composition of non-carbonate impurities was identified. Pindos limestones are recognized principally as impure (Qtz, Ill, Chl, are the main impurities), Tripolis limestones and dolostones are categorized as pure, however containing important organic material and Qtz, Ms, Ill, Ab, Sme/MCl, Chl, whereas Ionian limestones are pure (except for Vigla and Paleocene limestones), containing mostly Qtz and clay minerals. Qualitative mineral chemistry analysis, by means of the scanning electron microscope, showed that cement is the purest carbonate phase (mainly expressed in Pindos limestones), underlined the chemical purity of Pantokrator limestones and the subjacent dolostones, while no clear correlation between lithotypes and the chemical composition was established.Based on the determination of the geochemical composition in main oxides, trace elements, REE and inorganic carbon, Ionian limestones are classified as high-very high pure limestones, Tripolis limestones as high (Achaia) and very high pure (Etoloakarnania) (the amount of organic matter was not taken into account) and Pindos limestones as medium pure. By applying statistical techniques, the distribution of the most important elements (in insoluble residue – carbonate fraction) was also investigated and it resulted in differentiations, depending on geotectonic unit carbonate rocks derived from. Therefore, Pindos limestones are characterized by enrichment in Si, Al / REE and related elements, while on the other hand, Tripolis and Ionian carbonates, are poor in these elements, a fact that is consistent with the paleo geographic environment and depositional setting of each one. The industrial assessments on the carbonates of west Greece was performed through representative samples, which were crushed, ground, by means of Air-jet mill, for the final achievement of ultrafine grain sized specimens. The latter were subjected to laboratory tests, in order to determine the physical and technological properties of potential carbonate fillers. The measurements identified the: Specific gravity, pH, electric conductivity, water soluble, insoluble residue, organic matter, calcium carbonate content, oil absorption, abrasion, specific surface area, colour, grain size – grain size distribution and particle shape (by using the modern, static and dynamic imaging, automated technique). Statistical analysis on the extracted results, as well as investigation of correlations among the calculated properties, revealed that the insoluble residue affects negatively the abrasion and whiteness. Thus, detection of elements that are connected with high correlation coefficients to it (such as Si, Al, Fe/ Mn, K, Ni, Au, Υ / Sr, Ti, Na, Zr, V, REE), can be used as preliminary quality assessment indicator (especially in Pindos limestones). It has been proven that abrasion depends mainly on the composition of original rock and the grain size of filler, itself (fillers containing non-carbonate impurities, such as insoluble Al-Si minerals, water soluble salts, metallic Zn minerals, dolomite or other magnesium minerals, as well as fillers with excessive fraction of coarse particles, display larger abrasion). Oil absorption is connected to morphometric features of particles (the smaller grain size and higher specific surface area, the higher oil absorption). Whiteness is reduced due to the presence of organic material, dolomite, Al-Si impurities and opaque minerals. Lithological type of carbonate rocks, particularly micrite/allochems-crystalline cement ratio, influences certain filler properties, such as grain size, specific surface area, colour and partly oil absorption, despite the pulverization that mediates. As a result, possible localization or separation of certain carbonate lithotypes in a deposit, may dictate their preference for particular applications in the future.In the final part of the thesis, calcium carbonate suitability for use as filler in paper, elastic and coating industries and also other industrial applications was identified, in accordance with the limit values of relevance, given in certified international standards for fillers etc. Evaluation process showed that the studied rocks, derived from west Greece, are suitable for a wide range of applications, including those of high added value, such as fillers, as well as other of lower economic rate. Specially, Ionian zone carbonates, possess overwhelming superiority concerning the applications multiplicity, because of their high whiteness and chemical purity (fillers in paper, paints and other industrial uses). Among them, Pantokrator limestones exhibit the purest carbonate composition and the widest range of applications and are considered as the most encouraging, regarding utilization in the cases where high chemical purity materials are required.
Degree
thesis:*- Grantor dc:publisher
- University of Patras
- Year dc:date
- 2020
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Bourouni, Penelope
- Μπουρούνη, Πηνελόπη
Subjects
dc:subject × 22- Ανθρακικά πετρώματα
- Βιομηχανικές εφαρμογές
- Πετρογραφία - ορυκτολογία
- Γεωχημεία
- Πληρωτικά υλικά
- Τεχνολογικές ιδιότητες
- Carbonate rocks
- Industrial uses
- Petrography - mineralogy
- Geochemistry
- Fillers
- Technological properties
- Γεωεπιστήμες και Επιστήμες Περιβάλλοντος
- Φυσικές Επιστήμες
- Γεωεπιστήμες, διεπιστημονική προσέγγιση
- Γεωχημεία και Πετρολογία
- Γεωλογία
- Earth and Related Environmental Sciences
- Natural Sciences
- Geosciences, interdisciplinary
- Geochemistry and Petrology
- Geology
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/49140