National Technical University of Athens (NTUA)
Οπτικές διασυνδέσεις υψηλής χωρητικότητας με πομποδέκτες σειριακής μετάδοσης για την διασύνδεση υπολογιστικών κέντρων
Abstract
dc:descriptionThe modern age is characterized by direct exchange of information created either by humans or by machines. This information is stored and circulated by data centers which must constantly upgrade their optical interfaces in order to cope with the need for greater bandwidth. 400 GbE optical interfaces have already begun to be installed in the data centers, however efforts to develop the next model to 800 or even 1600 Gb/s have already begun. The development of transceivers that can transmit serially at speeds higher than 50 Gbaud is key to achieving this goal as the increase in capacity through the increase in lines is limited by the size of the transceiver package. It is also very likely that in the future, in conjunction with electrical switches, optical switches based on optical circuit switching (OCS) will be used, to realize hybrid and later perhaps purely optical switching network architectures. The main data center architectures in use today are three-tier, fat-tree and leaf-spine, with the latter being adopted by large users (FaceBook, Microsoft) as it tries to flatten the network utilizing the arrangement of servers into small pods with a fixed and defined number of server racks, instead of larger clusters. This dissertation focuses on efforts to develop a 2x100 Gb/s transmitter, and a 100 Gb/s variable wavelength transmitter, based on a new electro-optical polymer material for the construction of of fast modulators and in the design of new photonic structures in this material to be used as building blocks in the new generation transmitters. Historically, high-speed optical transmissions have been achieved using optical time division multiplexing (OTDM) due to the lack of broadband electronic and optoelectronic components, such as electronic pulse generating circuits, amplifiers, optical modulators to build a chain of components capable of generating signals directly at 100 Gb/s. In OTDM optical signals at a lower rate are generated and then multiplexed until the desired transmission rate is achieved. This technique was used in core networks and used RZ-OOK pulses that are narrower in time to utilize the entire available optical fiber bandwidth. At the interface points of the core network with the metropolitan networks, where wavelength multiplexing (WDM) is mainly used, the broad spectrum of the RZ-OOK pulses must be converted to the most efficient in terms of spectrum use, NRZ-OOK. For this purpose, an all-optical format converter based on delay lines fabricated in integrated photonic circuit was developed. The format converter was first simulated in appropriate software and its good operation was demonstrated with OK, DPSK and more advanced 16-QAM signals. Experiments demonstrated the good operation of the RZ-DPSK to NRZ-DPSK conversion at a rate of 40 Gb/s. An alternative technique for achieving high speeds is electronic time division multiplexing. With this technique, speeds of 100 Gb/s have been achieved in the past, but no electronic driving circuits and high-speed optical modulators based on new electro-optical polymer material were available. The availability of electric drivers and high-bandwidth optical modulators allowed the development of the first integrated serial transmitter at 100 Gb/s. Further scaling of the transmitter to 2x100 Gb/s required the development of new passive photonic structures in the electro-optical polymer such as 1x2 and 1x4 MMI couplers that would act as power splitters to split the optical power of a DFB laser on the transmitter in 2 or 4 equal parts feeding equal number of modulators. The structures were designed and simulated in appropriate simulation software with targeted loss values below 1 dB and port imbalance below 0.5 dB. They were then fabricated into PICs using the electro-optic polymer material and characterized in terms of losses and imbalance in probe-stations, with the measurements confirming the targeted values at the 1x2 MMIs were achieved in a bandwidth greater than 100 nm, while some deviations were observed at 1x4 MMI structures. The 1x2 structures with the best performance were also characterized by an infrared camera where two beam profiles were clearly formed on screen. These structures were selected for integration with an array of two optical modulators to create the optical subassembly. The optical subassembly was then integrated with the electronic driver circuits and packaged into the 2x100 Gb/s transmitter. The transmitter characterization process involved static measurements of the transfer functions, confirming the good operation of the integrated MMI and also the modulated optical spectrum was recorded at 2x80 and 2x100 Gb/s. The experimental setup was based on electronic time division multiplexing to generate the electrical signals that were sent to the transmitter. It was combined with a 4x100 Gb/s receiver to create an optical interface and transmission experiments were performed at 80 and 100 Gb/s up to 1625 m by measuring the error rate. The transmitter had error free performance at 80 and 100 Gb/s up to 1000 m and BER lower than 10-7 at 1625 m. At this distance the eye diagram quality was significantly degraded due to dispersion in the SMF. The 100 Gb/s variable wavelength transmitter consisted of an external cavity laser, an optical modulator and the driving electronics. The external cavity laser comprised a gain element hybridly integrated to a Bragg grating structure on photonic integrated circuit which acts as a semi-transparent mirror at one end of the cavity. Using appropriate software, the Bragg grating structure was designed and its operation was studied in order to achieve operation in the area 1550 - 1570. 3rd and 5th order diffraction gratings were studied and fabricated, with a number of periods of 100, 200, 400, 600, 800, 1000, with period Λ 1.392, 1.406, 1.420, 2.32, 2.338, 2.343, 2.349, and 2.366. There were also variations in the corrugation size from 1.8 to 6.3 um with a step of 0.5 um. Larger tuning amplitudes were achieved with gratings with a number of periods of >800 and a corrugation size of >5.3 um, ranging from 2 to 3 dB. The Bragg gratings, were fabricated on individual chips, and the best performing designs were selected to be integrated hybridly with a gain element to create an external cavity laser. The emission wavelength of the laser could be tuned in a range greater than 17 nm by thermo-optical effect, i.e. by heating the grating structure with a heating electrode and shifting the Bragg wavelength. The power required to achieve this tuning range was 800 mW. The linewidth of the laser was measured using both homodyne and heterodyne methods and was found 1.5 MHz, which can be further improved by making the Bragg grating filter response sharper. The laser was used in a 40 Gb/s transmission experiment and was compared to a commercial DFB laser at the same wavelength with no significant difference in the obtained eye diagrams and BER values. The Bragg grating design that was selected to be monolithically integrated with the optical modulator (in the electro-optical polymer) did not show the required performance, so a different Bragg grating based external cavity laser integrated in passive polymeric material was used as a mitigation plan. The wavelength tunability that could be achieved was 22 nm while the output optical power with the gain element at 120 mA was 3 dBm. The laser on the passive polymer was then hybridly integrated with an optical modulator fabricated in the electro-optical polymer material, the electrical driving circuits, and the tunable wavelength transmitter was packaged in a gold box. The electronic driving circuits consumed 3.8 W for the operation of the electronic multiplexing and amplification at 100 Gb/s. The transmitter was characterized in terms of the static transfer function of the modulator, the wavelength tunability and modulated spectra at the transmitter's output were obtained at 100 Gb/s using the same experimental setup based on electronic time division multiplexing for generating the 50 Gb/s OOK signals. It performance was also assessed in transmission experiments up to 1625 m where an error-free operation of up to 1000 m and a bit error rate (BER) value of 10-7 at 1625 m were achieved. The transmitter was also used in an experimental setup intended to simulate an optical circuit switching (OCS) network of an intra-data center network, and demonstrated at 100 Gb/s the way in which the tunability can resolve contentions and improve the flexibility and the efficiency of the network.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2021
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Gkroumas, Panagiotis
- Γκρούμας, Παναγιώτης
Subjects
dc:subject × 27- Οπτικοί πομποδέκτες
- Οπτικές διασυνδέσεις
- Ολοκληρωμένα φωτονικά κυκλώματα
- Ολοκληρωμένοι οπτικοί πομποί 200 Gb/s
- Ολοκληρωμένα περιθλαστικά φράγματα Bragg
- Συζεύκτες παρεμβολής πολλαπλών ρυθμών
- Λέιζερ εξωτερικής κοιλότητας
- Οπτικός πομπός μεταβλητού μήκους κύματος
- Ηλεκτρο-οπτικό πολυμερές
- Υβριδική φωτονική ολοκλήρωση
- Optical transceivers
- Optical interconnects
- Photonic integrated circuits (PIC)
- Integrated optical transmitters 200 Gb/s
- Integrated Bragg gratings
- Multimode interference couplers (MMI)
- External cavity laser
- Tunable optical transmitter
- 400 Gigabit Ethernet
- Electro-optic polymer
- Hybrid photonic integration
- Επιστήμη Ηλεκτρολόγου Μηχανικού, Ηλεκτρονικού Μηχανικού, Μηχανικού Η/Υ
- Επιστήμες Μηχανικού και Τεχνολογία
- Μηχανική και συστήματα επικοινωνιών, Τηλεπικοινωνίες
- Electrical Engineering, Electronic Engineering, Information Engineering
- Engineering and Technology
- Communication engineering and systems, Telecommunications
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/49187