Back to search

Technical University of Crete (TUC)

Development of computational tools, based on Radial Basis Functions and Differential Evolution, for the parametric design of aeroelastic systems

Abstract

dc:description

In this study the development and validation of methodologies and computational tools, allowing for the effective design, optimization and numerical simulation of aeroelastic systems. Specifically, a software tool named "T4T" (Tools for Turbomachinery) is developed for the parametric design of the external surface and the internal geometry of horizontal-axis wind turbine blades, which is fully parametric and customizable, allowing the user for defining the internal blade structure, including shear webs. Moreover, the software can be used in an automated way (batch mode) to produce several candidate geometries in an optimization cycle, while retaining its topology unchanged. Regarding the use of an optimization methodology in the aforementioned wind turbine design loop, a parallel, synchronous/asynchronous, metamodel-assisted Differential Evolution algorithm is developed. Subsequently, a specialized surface reconstruction methodology is implemented, for the geometry definition of a wind turbine blade as a single Non-Uniform Rational B-Spline (NURBS) surface, from a target set of data points provided in the form of a surface triangular mesh. For the parameterization of the blade surface the dedicated blade geometry modelling software "T4T" is used. The shape reconstruction of the blade surface is formulated as an optimization procedure, which is realized with the aforementioned Differential Evolution algorithm. At next, a methodology for the deformation of computational grids, based on Radial Basis Functions (RBFs), is reported. Additionally, an approach for the acceleration of (RBF)-based mesh deformation procedure via the reduction of the surface points is developed, considering agglomeration of surface nodes’ control volumes. It relies on the strategy followed by the corresponding multigrid methods, aiming to accelerate numerical solutions of fluid flow, radiative heat transfer, etc. Finally, a partitioned Fluid-Structure Interaction (FSI) methodology is developed, based on the RBFs Partition of Unity (PoU) method. With this approach the conservation of energy, momentum and force is ensured over the interface of the flow and structural grids as a result of the radial functions’ properties. The use of the PoU methodology improves the efficiency of the data transfer procedure providing simultaneously a physical formulation of the force distribution.

Degree

thesis:*
Grantor dc:publisher
Technical University of Crete (TUC)
Year dc:date
2021

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Strofylas, Giorgos
  • Στροφύλας, Γιώργος

Subjects

dc:subject × 19

Rights

dc:rights
Statement dc:rights
  • BY_4_0
Language dc:language
eng

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/49311

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Strofylas, Giorgos; Στροφύλας, Γιώργος. Development of computational tools, based on Radial Basis Functions and Differential Evolution, for the parametric design of aeroelastic systems. Technical University of Crete (TUC), 2021. http://hdl.handle.net/10442/hedi/49311