Back to search

University of Thessaly (UTH)

Design space exploration in near-data co-processors for general-purpose acceleration, in high-performance and low-power processing environments

Abstract

dc:description

Modern computer architectures face a performance scaling wall as the throughput and power consumption bottleneck has shifted from the core pipeline towards the DRAM latency and data transfer operations. This phenomenon can be partially attributed to the stop of Dennard's scaling and to the continuous shrinking size of transistors. As a result, the power density of the integrated circuits has increased to a point where most of the cores in a multi-core architecture are forced to operate in near-threshold voltage levels. In order to address such an issue, researchers tend to deviate from the standard Von Neuman architectures towards new computing models. In the last decade there is a resurgence of the NDP paradigm, under which the instructions are executed on the DRAM die instead of the core pipeline. Therefore, the amount of CPU-DRAM transactions is significantly decreased and thus, it positively affects the power dissipation and the achievable throughput of the system. Under this premise, in this dissertation we explore the NDP paradigm for high performance and for low-power computing. Regarding the high performance computing, we propose a novel approach that considers general purpose loop execution. Our design employs an instruction scheduling methodology which issues each individual instruction on a custom integrated circuit acting as loop accelerator that is located on the logic layer of an HMC DRAM. There, instructions are iteratively executed in parallel in a software pipelining fashion, while intermediate results are forwarded through an on-chip interconnection network. Regarding the low-power computing, we develop a novel timing analysis methodology that is based on the premises of STA, specifically for low-power, low-end pipelines. The proposed timing methodology considers the excitation of the timing paths for each instruction supported by the ISA, and calculates the worst-case slack for each individual instruction. As a result, we obtain timing information on an instruction level and we proceed in exploiting such knowledge to adaptively scale the clock frequency according to instruction types that execute in the pipeline at any given time. In the sequel, we employ the aforementioned BTWC methodology to co-design a pipeline from the ground up to support a clock scaling mechanism with cycle-to-cycle granularity. We focus on the general purpose code execution and we implement our design on the logic layer of an HMC DRAM in order to enable near-data execution. We opt to evaluate both the high performance and the low power architectures on post-layout simulations in order to strengthen the validity of our designs. Results indicate a significant performance increase in terms of throughput over the baseline processors while the power consumption levels are critically reduced.

Degree

thesis:*
Grantor dc:publisher
University of Thessaly (UTH)
Year dc:date
2021

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Tziouvaras, Athanasios
  • Τζιουβάρας, Αθανάσιος

Subjects

dc:subject × 18

Rights

dc:rights
Statement dc:rights
  • BY_4_0
Language dc:language
eng

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/49517

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Tziouvaras, Athanasios; Τζιουβάρας, Αθανάσιος. Design space exploration in near-data co-processors for general-purpose acceleration, in high-performance and low-power processing environments. University of Thessaly (UTH), 2021. http://hdl.handle.net/10442/hedi/49517