National Technical University of Athens (NTUA)
Design and realization of photonic structures and control for interferometric hybridly integrated sensors
Abstract
dc:descriptionIn the last two decades, we have witnessed a remarkable progress in the development of biophotonic sensor devices and their application in areas such as environmental monitoring, biotechnology, medical diagnostics, drug screening, food safety, and security, among others. The technology of optical biosensors has reached a high degree of maturity and several commercial products are on the market. But problems of stability, sensitivity, and size have prevented the general use of optical biosensors for real field applications. Integrated photonic biosensors based on silicon technology could solve such drawbacks, offering early diagnostic tools with better sensitivity, specificity, and reliability, which could improve the effectiveness of in-vivo and in-vitro diagnostics.In this thesis, the development of the refractive index photonic sensor will be shown, mainly related to the design photonic structures towards to miniaturization by the hybrid integration of the photonic sensor, the development of the algorithm for processing the data which will lead to enhanced sensitivity and limit of detection and the requisite control electronics. Firstly, in chapter 1, the state-of-the-art of the sensors in different competitive platforms is presented. The advancement and the potential of the integrated lab-on-a-chip photonic sensors in terms of sensitivity and compactness is briefly described. In more detail, the waveguide photonic platform on which the passive photonic structures have been designed as well as the principle of operation of the refractive index sensor is presented.In chapter 2, three different simulation methods have been described. Each one of them is being used for a different stage of the photonic component design. Moreover, the designs of three main structures are presented, which are intended to increase the compactness of the photonic sensor through the hybrid integration that could offer. In more detail, three monolithic structures are described, which are the keys for the effectiveness of the power budget and the proper operation of the optical circuit. The first kind of structures is the multimode interference couplers (MMIs) which is responsible for accurately splitting the light from the single VCSEL into 8 equal parts that feed the on-chip integrated interferometers with insertion loss and power imbalance lower than 0.5 dB. The second kind of structures is the grating coupler which is responsible for the vertical coupling of light from the flip-chip bonded VCSEL into the TriPleX waveguide, having coupling efficiency almost 30%. The third kind of structure is a polarization rotator which enables the rotation of the perpendicular waveguide symmetry and thus, leads to indirect spatial rotation of the propagation axis causing the excitation of two hybrid modes, supporting both TE and TM polarization. These photonic structures provide true potential for sensor compactness and miniaturization.In chapter 3, a method for the processing of the measurement data and the calculation of the resonance shift based on the well-known Fast Fourier Transform (FFT) is presented. For the first time the FFT-based method is being studied as an alternative to the peak-search method for high performance lab-on-a-chip bio-photonic systems, based on resonant cavities and wavelength scanning lasers. An extensive set of numerical studies comparing the two methods is presented, under an improved noise model, and is demonstrated that the FFT method can improve the resolution and the detection limit of the system by 2-3 order of magnitude. It is also shown that for practical scanning steps and realistic levels of loss inside the cavity, Q-factor values around 104 can maximize the performance with resolution close to 0.01 pm and detection limit close to 10e-7 nm/RIU. In order to extend the benchmarking of the FFT method, it is also compared against a more sophisticated and resource consuming peak-search variant, which is widely used in practical systems and is based on Lorentzian fitting. Through this comparison, it is found that the FFT method has still a major advantage, as it can achieve the same level of accuracy in the estimation of the resonance shift using a scanning step that is almost 270 times larger than the necessary step in the Lorentzian fitting process.In chapter 4, the general architecture of the electronic platform that controls the individual parts of the sensor system is presented. This 2-layer architecture has at the lower layer subunits for the control of the internal pretreatment unit, the control of the microfluidic structures on the microfluidic chip, the control of the optoelectronic components on the optoelectronic platform and the collection, organization and further transmission of the raw results. At the upper layer of the architecture, there is the microcontroller that orchestrates and synchronizes the individual electronic boards ensuring their proper operation and interaction. In the second part of this chapter, experimental results are presented, which are in a perfect alignment and agreement with the trends of the numerical studies that have been presented in chapter 3. Moreover, experiments with real samples are presented, using biomodified sensing MRRs and having as target the detection and capture the specific binding of the mycotoxin OTA and copper target molecules to the aptamers targeting OTA and copper, respectively as well as the effect of the MgCl2 presence on the molecules binding.In the last chapter of this thesis, some general and interesting conclusions are drawn and presented and finally, some ideas for future work based on the models and the results of this thesis are mentioned.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2021
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Gounaridis, Eleftherios
- Γουναρίδης, Ελευθέριος
Subjects
dc:subject × 25- Φωτονικοί αισθητήρες
- Υβριδική ολοκλήρωση
- Δείκτης διάθλασης
- Συζεύκτες πολλών ρυθμών
- Ζεύκτης φράγματος περίθλασης
- Περιστροφικός πολωτής
- Μικροδακτύλιοι συντονισμού
- Fast Fourier Transform
- Πλατφόρμα νιτριδίου του πυριτίου
- Φωτονικά ολοκληρωμένα κυκλώματα
- Photonic sensors
- Hybrid integration
- Refractive index
- Multi‐mode interference couplers
- Grating couplers
- Polarization rotator
- Micro‐ring resonators
- Silicon nitride platform
- Photonic integrated circuits
- Φυσική
- Φυσικές Επιστήμες
- Οπτική
- Physical Sciences
- Natural Sciences
- Optics
Rights
dc:rights- Statement dc:rights
-
- BY_NC_4_0
- Language dc:language
- eng
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/49540